80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK8034/MK8034GSX/3BD7BBF5DFDB
Andrey Ponomarenko f78ebcf301 Update of reports (new: 4, modified: 1172)
2025-01-05 03:17:30 +03:00

296 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..34GSX
Device Model: TOSHIBA MK8034GSX
Serial Number: --
Firmware Version: AH301J
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.3/5528
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Sun Dec 8 19:16:25 2024 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1730
4 Start_Stop_Count -O--CK 100 100 000 - 2443
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 091 091 000 - 3642
10 Spin_Retry_Count PO--CK 148 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2312
192 Power-Off_Retract_Count -O--CK 100 100 000 - 242
193 Load_Cycle_Count -O--CK 087 087 000 - 136576
194 Temperature_Celsius -O---K 100 100 000 - 21 (Min/Max -8/57)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 34
220 Disk_Shift -O---- 100 100 000 - 4235
222 Loaded_Hours -O--CK 094 094 000 - 2497
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 441
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 41
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 41 [40] occurred at disk power-on lifetime: 2580 hours (107 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 02 02 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000202 = 514
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 03 ff 00 01 f9 ca 3b 00 00 00 e0 00 00:00:06.262 READ DMA
25 03 03 00 01 00 00 00 f9 ca 3b e0 00 00:00:06.250 READ DMA EXT
ef 03 03 0c 45 00 ff ff 00 ff ff e0 00 00:00:06.249 SET FEATURES [Set transfer mode]
ef ff 03 10 0c 00 ff ff 00 ff ff e0 00 00:00:06.249 SET FEATURES [Set transfer mode]
c6 ff ff 50 10 00 00 00 00 ff ff e0 00 00:00:06.249 SET MULTIPLE MODE
Error 40 [39] occurred at disk power-on lifetime: 2567 hours (106 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 f9 cc 3d e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00f9cc3d = 16370749
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 ff ff 00 01 00 00 00 f9 ca 3b e0 00 00:00:31.241 READ DMA EXT
25 ff ff 00 10 00 00 02 8d 31 db e0 00 00:00:06.870 READ DMA EXT
25 ff ff 00 01 00 00 02 17 ce 5b e0 00 00:00:06.808 READ DMA EXT
25 ff ff 00 02 00 00 01 5b 43 69 e0 00 00:00:06.808 READ DMA EXT
35 ff ff 00 01 00 00 02 17 ce 5f e0 00 00:00:06.807 WRITE DMA EXT
Error 39 [38] occurred at disk power-on lifetime: 2290 hours (95 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 f9 d0 8d e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00f9d08d = 16371853
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 ff ff 00 10 00 00 00 f9 ce 8b e0 00 00:00:06.625 READ DMA EXT
25 ff ff 00 02 00 00 01 59 d2 a3 e0 00 00:00:06.625 READ DMA EXT
25 ff ff 00 02 00 00 01 59 ca 45 e0 00 00:00:06.625 READ DMA EXT
25 ff ff 00 02 00 00 01 59 ca 3b e0 00 00:00:06.624 READ DMA EXT
25 ff ff 00 10 00 00 00 f9 ca 3b e0 00 00:00:06.624 READ DMA EXT
Error 38 [37] occurred at disk power-on lifetime: 2009 hours (83 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 01 c3 c1 70 e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x01c3c170 = 29606256
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 ff ff 00 7f 00 00 01 c3 bf 6e e0 00 00:34:00.111 READ DMA EXT
25 ff ff 00 7f 00 00 01 c3 be ef e0 00 00:33:59.883 READ DMA EXT
25 ff ff 00 7f 00 00 01 c3 be 70 e0 00 00:33:59.883 READ DMA EXT
25 ff ff 00 06 00 00 01 c3 be 6a e0 00 00:33:59.882 READ DMA EXT
25 ff ff 00 44 00 00 01 c3 be 26 e0 00 00:33:59.882 READ DMA EXT
Error 37 [36] occurred at disk power-on lifetime: 2008 hours (83 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 01 c3 bf 90 e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x01c3bf90 = 29605776
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 ff ff 00 7f 00 00 01 c3 be ef e0 00 00:33:59.883 READ DMA EXT
25 ff ff 00 7f 00 00 01 c3 be 70 e0 00 00:33:59.883 READ DMA EXT
25 ff ff 00 06 00 00 01 c3 be 6a e0 00 00:33:59.882 READ DMA EXT
25 ff ff 00 44 00 00 01 c3 be 26 e0 00 00:33:59.882 READ DMA EXT
25 ff ff 00 06 00 00 01 c3 be 20 e0 00 00:33:59.881 READ DMA EXT
Error 36 [35] occurred at disk power-on lifetime: 2008 hours (83 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 01 59 d4 a5 e1 00 Error: ICRC, ABRT 1 sectors at LBA = 0x0159d4a5 = 22664357
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 ff ff 00 02 00 00 01 59 d2 a3 e0 00 00:00:06.554 READ DMA EXT
25 ff ff 00 02 00 00 01 59 ca 45 e0 00 00:00:06.554 READ DMA EXT
25 ff ff 00 02 00 00 01 59 ca 3b e0 00 00:00:06.553 READ DMA EXT
25 ff ff 00 10 00 00 00 f9 ca 3b e0 00 00:00:06.553 READ DMA EXT
25 ff ff 00 01 00 00 00 f9 ca 3b e0 00 00:00:06.553 READ DMA EXT
Error 35 [34] occurred at disk power-on lifetime: 1995 hours (83 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 02 db b4 8d e2 00 Error: ICRC, ABRT 1 sectors at LBA = 0x02dbb48d = 47953037
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 d9 ae f2 db b2 d3 e2 00 00:22:50.457 READ DMA
c8 00 00 00 10 d9 61 6a d9 ae e3 e2 00 00:22:50.440 READ DMA
c8 00 00 00 18 d8 1c a2 d9 61 53 e2 00 00:22:50.440 READ DMA
c8 00 00 00 58 d7 87 22 d8 1c 4b e2 00 00:22:50.436 READ DMA
c8 00 00 00 08 d6 4f 2a d7 87 1b e2 00 00:22:50.425 READ DMA
Error 34 [33] occurred at disk power-on lifetime: 1864 hours (77 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 01 00 00 00 00 02 02 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00000202 = 514
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 03 ff 00 01 f9 ca 3b 00 00 00 e0 00 00:00:06.201 READ DMA
25 03 03 00 01 00 00 00 f9 ca 3b e0 00 00:00:06.189 READ DMA EXT
ef 03 03 0c 45 00 ff ff 00 ff ff e0 00 00:00:06.188 SET FEATURES [Set transfer mode]
ef ff 03 10 0c 00 ff ff 00 ff ff e0 00 00:00:06.188 SET FEATURES [Set transfer mode]
c6 ff ff 50 10 00 00 00 00 ff ff e0 00 00:00:06.188 SET MULTIPLE MODE
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink