80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ01/MQ01ABD050/65101CB0F14E
Andrey Ponomarenko f78ebcf301 Update of reports (new: 4, modified: 1172)
2025-01-05 03:17:30 +03:00

366 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.2-RELEASE-p1 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD050
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AX001A
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Aug 7 22:43:33 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1070
4 Start_Stop_Count -O--CK 100 100 000 - 8804
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 071 071 000 - 11875
10 Spin_Retry_Count PO--CK 253 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 7575
191 G-Sense_Error_Rate -O--CK 100 100 000 - 3696
192 Power-Off_Retract_Count -O--CK 100 100 000 - 217
193 Load_Cycle_Count -O--CK 086 086 000 - 142747
194 Temperature_Celsius -O---K 100 100 000 - 35 (Min/Max 14/54)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 079 079 000 - 8439
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 272
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 3994 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3994 [153] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 98 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 78 00 00 00 45 10 88 40 00 00:12:51.730 WRITE FPDMA QUEUED
61 00 08 00 70 00 00 00 45 0f e0 40 00 00:12:51.717 WRITE FPDMA QUEUED
61 00 08 00 80 00 00 00 45 0f c8 40 00 00:12:51.706 WRITE FPDMA QUEUED
61 00 08 00 40 00 00 00 45 0f b0 40 00 00:12:51.702 WRITE FPDMA QUEUED
61 00 18 00 50 00 00 00 45 0f 90 40 00 00:12:51.684 WRITE FPDMA QUEUED
Error 3993 [152] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 98 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 20 00 b8 00 00 00 44 fd a8 40 00 00:12:47.796 WRITE FPDMA QUEUED
61 00 20 00 c8 00 00 00 44 fd 68 40 00 00:12:47.784 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 44 fd 30 40 00 00:12:47.776 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 00 44 fc 30 40 00 00:12:47.772 WRITE FPDMA QUEUED
61 00 08 00 10 00 00 00 44 fc 18 40 00 00:12:47.752 WRITE FPDMA QUEUED
Error 3992 [151] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 18 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 b0 00 00 00 44 dc 20 40 00 00:12:43.707 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 44 dc 10 40 00 00:12:43.707 WRITE FPDMA QUEUED
61 00 10 00 a0 00 00 00 44 db c8 40 00 00:12:43.706 WRITE FPDMA QUEUED
61 00 08 00 98 00 00 00 44 db b8 40 00 00:12:43.706 WRITE FPDMA QUEUED
61 00 08 00 90 00 00 00 44 db a0 40 00 00:12:43.705 WRITE FPDMA QUEUED
Error 3991 [150] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 38 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 90 00 00 00 44 d1 58 40 00 00:12:40.007 WRITE FPDMA QUEUED
61 00 08 00 b8 00 00 00 44 d1 48 40 00 00:12:40.007 WRITE FPDMA QUEUED
61 00 08 00 88 00 00 00 44 d1 40 40 00 00:12:40.006 WRITE FPDMA QUEUED
61 00 08 00 b0 00 00 00 44 d1 38 40 00 00:12:40.006 WRITE FPDMA QUEUED
61 00 10 00 a8 00 00 00 44 d1 28 40 00 00:12:40.005 WRITE FPDMA QUEUED
Error 3990 [149] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 c0 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 70 00 30 00 00 38 5c ed 18 40 00 00:12:39.816 WRITE FPDMA QUEUED
60 00 58 00 28 00 00 00 65 a1 a0 40 00 00:12:36.393 READ FPDMA QUEUED
61 00 08 00 20 00 00 00 44 bb 90 40 00 00:12:36.392 WRITE FPDMA QUEUED
61 00 08 00 18 00 00 00 44 bb 88 40 00 00:12:36.392 WRITE FPDMA QUEUED
61 00 08 00 10 00 00 00 44 bb 80 40 00 00:12:36.391 WRITE FPDMA QUEUED
Error 3989 [148] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 10 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 f8 00 00 00 44 b7 d0 40 00 00:12:32.773 WRITE FPDMA QUEUED
61 00 08 00 f0 00 00 00 44 b7 c8 40 00 00:12:32.773 WRITE FPDMA QUEUED
61 00 08 00 e8 00 00 00 44 b7 c0 40 00 00:12:32.773 WRITE FPDMA QUEUED
61 00 08 00 e0 00 00 00 44 b7 b8 40 00 00:12:32.772 WRITE FPDMA QUEUED
61 00 08 00 d8 00 00 00 44 b7 b0 40 00 00:12:32.772 WRITE FPDMA QUEUED
Error 3988 [147] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 48 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 01 00 98 00 00 00 04 0e c0 40 00 00:12:32.585 WRITE FPDMA QUEUED
60 00 58 00 90 00 00 00 65 a0 f0 40 00 00:12:29.103 READ FPDMA QUEUED
61 00 08 00 10 00 00 00 44 b1 28 40 00 00:12:29.101 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 44 b1 20 40 00 00:12:29.101 WRITE FPDMA QUEUED
61 00 08 00 f8 00 00 00 44 b1 18 40 00 00:12:29.101 WRITE FPDMA QUEUED
Error 3987 [146] occurred at disk power-on lifetime: 4494 hours (187 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 18 00 00 00 65 7a 58 40 00 Error: WP at LBA = 0x00657a58 = 6650456
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d0 00 00 00 44 9d 28 40 00 00:12:25.517 WRITE FPDMA QUEUED
61 00 08 00 c8 00 00 00 44 9c 40 40 00 00:12:25.517 WRITE FPDMA QUEUED
61 00 08 00 c0 00 00 00 44 9c 28 40 00 00:12:25.517 WRITE FPDMA QUEUED
61 00 08 00 b8 00 00 00 44 9c 20 40 00 00:12:25.516 WRITE FPDMA QUEUED
61 00 08 00 b0 00 00 00 44 9b e0 40 00 00:12:25.516 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 4268 6650456
# 2 Short offline Completed: read failure 00% 4268 6650456
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 35 Celsius
Power Cycle Min/Max Temperature: 33/36 Celsius
Lifetime Min/Max Temperature: 14/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (29)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 7575 --- Lifetime Power-On Resets
0x01 0x010 4 11875 --- Power-on Hours
0x01 0x018 6 32341113918 --- Logical Sectors Written
0x01 0x020 6 506952499 --- Number of Write Commands
0x01 0x028 6 38884554546 --- Logical Sectors Read
0x01 0x030 6 586171157 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 3696 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 7897 --- Spindle Motor Power-on Hours
0x03 0x010 4 8439 --- Head Flying Hours
0x03 0x018 4 142747 --- Head Load Events
0x03 0x020 4 32 --- Number of Reallocated Logical Sectors
0x03 0x028 4 7 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 3970 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 35 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 36 N-- Average Long Term Temperature
0x05 0x020 1 54 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 45 N-- Highest Average Short Term Temperature
0x05 0x038 1 27 N-- Lowest Average Short Term Temperature
0x05 0x040 1 41 N-- Highest Average Long Term Temperature
0x05 0x048 1 32 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 10681 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 19 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 14 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink