80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ01/MQ01ABD075/1631F9F27EA2
Andrey Ponomarenko d96e63400c Update of reports (new: 3084, modified: 0)
2021-05-18 23:01:35 +03:00

374 lines
20 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p1 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD075
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AX003M
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jan 19 21:57:49 2021 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 183) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1667
4 Start_Stop_Count -O--CK 100 100 000 - 3004
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 059 059 000 - 16612
10 Spin_Retry_Count PO--CK 159 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2887
191 G-Sense_Error_Rate -O--CK 100 100 000 - 111
192 Power-Off_Retract_Count -O--CK 100 100 000 - 589890
193 Load_Cycle_Count -O--CK 081 081 000 - 197170
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 9/55)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 068 068 000 - 13063
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 261
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 334 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 334 [77] occurred at disk power-on lifetime: 12869 hours (536 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 30 00 00 03 2d 5b a8 40 00 Error: UNC at LBA = 0x032d5ba8 = 53304232
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 38 00 00 03 2d 5c 50 40 00 6d+04:08:37.725 READ FPDMA QUEUED
60 01 00 00 30 00 00 03 2d 5b 50 40 00 6d+04:08:37.725 READ FPDMA QUEUED
60 01 00 00 28 00 00 03 2d 5a 50 40 00 6d+04:08:37.725 READ FPDMA QUEUED
60 01 00 00 20 00 00 03 2d 59 50 40 00 6d+04:08:37.725 READ FPDMA QUEUED
60 01 00 00 18 00 00 03 2d 58 50 40 00 6d+04:08:37.725 READ FPDMA QUEUED
Error 333 [76] occurred at disk power-on lifetime: 9378 hours (390 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 40 80 a8 40 00 Error: UNC at LBA = 0x034080a8 = 54558888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 40 80 80 40 00 00:00:17.015 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 80 00 40 00 00:00:17.014 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 7f 80 40 00 00:00:17.014 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 7f 00 40 00 00:00:17.013 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 7e 80 40 00 00:00:17.013 READ FPDMA QUEUED
Error 332 [75] occurred at disk power-on lifetime: 5034 hours (209 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 37 1f e0 40 00 Error: UNC at LBA = 0x03371fe0 = 53944288
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 37 1f 90 40 00 00:00:09.816 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 37 1f 10 40 00 00:00:09.815 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 37 1e 90 40 00 00:00:09.815 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 37 1e 10 40 00 00:00:09.814 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 37 1d 90 40 00 00:00:09.814 READ FPDMA QUEUED
Error 331 [74] occurred at disk power-on lifetime: 4811 hours (200 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 3e bb f0 40 00 Error: UNC at LBA = 0x033ebbf0 = 54442992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 3e bb 90 40 00 00:00:13.502 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e bb 10 40 00 00:00:13.501 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e ba 90 40 00 00:00:13.501 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e ba 10 40 00 00:00:13.500 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e b9 90 40 00 00:00:13.500 READ FPDMA QUEUED
Error 330 [73] occurred at disk power-on lifetime: 4465 hours (186 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 2c 92 b0 40 00 Error: UNC at LBA = 0x032c92b0 = 53252784
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 08 00 00 03 02 12 60 40 00 05:35:54.332 READ FPDMA QUEUED
60 01 00 00 00 00 00 03 2c 92 28 40 00 05:35:50.582 READ FPDMA QUEUED
60 01 00 00 00 00 00 03 2c 91 28 40 00 05:35:50.581 READ FPDMA QUEUED
61 00 40 00 00 00 00 00 bc 8a a0 40 00 05:35:50.442 WRITE FPDMA QUEUED
60 01 00 00 00 00 00 03 2c 90 28 40 00 05:35:50.377 READ FPDMA QUEUED
Error 329 [72] occurred at disk power-on lifetime: 4437 hours (184 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 34 e4 38 40 00 Error: UNC at LBA = 0x0334e438 = 53797944
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 34 e4 10 40 00 00:00:08.325 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 34 e3 90 40 00 00:00:08.325 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 34 e3 10 40 00 00:00:08.324 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 34 e2 90 40 00 00:00:08.324 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 34 e2 10 40 00 00:00:08.323 READ FPDMA QUEUED
Error 328 [71] occurred at disk power-on lifetime: 4297 hours (179 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 40 11 60 40 00 Error: UNC at LBA = 0x03401160 = 54530400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 40 11 10 40 00 00:00:17.591 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 10 90 40 00 00:00:17.591 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 10 10 40 00 00:00:17.590 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 0f 90 40 00 00:00:17.590 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 40 0f 10 40 00 00:00:17.589 READ FPDMA QUEUED
Error 327 [70] occurred at disk power-on lifetime: 3924 hours (163 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 3e bb f0 40 00 Error: UNC at LBA = 0x033ebbf0 = 54442992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 80 00 00 00 00 03 3e bb 90 40 00 00:00:13.453 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e bb 10 40 00 00:00:13.452 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e ba 90 40 00 00:00:13.452 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e ba 10 40 00 00:00:13.451 READ FPDMA QUEUED
60 00 80 00 00 00 00 03 3e b9 90 40 00 00:00:13.451 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14370 -
# 2 Short offline Completed without error 00% 9709 -
# 3 Short offline Completed without error 00% 4384 -
# 4 Short offline Completed without error 00% 4359 -
# 5 Short offline Completed without error 00% 4332 -
# 6 Short offline Completed without error 00% 4260 -
# 7 Short offline Completed without error 00% 4220 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 20/32 Celsius
Lifetime Min/Max Temperature: 9/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (191)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 2887 --- Lifetime Power-On Resets
0x01 0x010 4 16612 --- Power-on Hours
0x01 0x018 6 40400286020 --- Logical Sectors Written
0x01 0x020 6 777869778 --- Number of Write Commands
0x01 0x028 6 58730119078 --- Logical Sectors Read
0x01 0x030 6 926515748 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 111 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 13031 --- Spindle Motor Power-on Hours
0x03 0x010 4 13063 --- Head Flying Hours
0x03 0x018 4 197170 --- Head Load Events
0x03 0x020 4 56 --- Number of Reallocated Logical Sectors
0x03 0x028 4 1258 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 334 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 6 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 32 --- Current Temperature
0x05 0x010 1 32 N-- Average Short Term Temperature
0x05 0x018 1 30 N-- Average Long Term Temperature
0x05 0x020 1 55 --- Highest Temperature
0x05 0x028 1 9 --- Lowest Temperature
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
0x05 0x038 1 27 N-- Lowest Average Short Term Temperature
0x05 0x040 1 38 N-- Highest Average Long Term Temperature
0x05 0x048 1 30 N-- Lowest Average Long Term Temperature
0x05 0x050 4 10 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 12391 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 27 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 14 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink