1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
2025-01-05 01:57:11 +03:00

363 lines
19 KiB
Plaintext

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-STABLE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AX0P2D
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Feb 6 10:56:32 2024 SAST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 230) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 056 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1681
5 Reallocated_Sector_Ct PO--CK 001 001 050 NOW 16376
9 Power_On_Hours -O--CK 001 001 000 - 50036
12 Power_Cycle_Count -O--CK 100 100 000 - 3061
191 G-Sense_Error_Rate -O--CK 100 100 000 - 11584
192 Power-Off_Retract_Count -O--CK 100 100 000 - 229
193 Load_Cycle_Count -O--CK 001 001 000 - 1578112
194 Temperature_Celsius -O---K 100 100 000 - 34 (Min/Max 11/56)
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 245626529
200 Multi_Zone_Error_Rate -O--CK 100 100 000 - 1072525389
240 Head_Flying_Hours -O--CK 001 001 000 - 40994
241 Total_LBAs_Written -O--CK 100 100 000 - 45115823312
242 Total_LBAs_Read -O--CK 100 100 000 - 27260037464
254 Free_Fall_Sensor -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 2479 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2479 [174] occurred at disk power-on lifetime: 47758 hours (1989 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 58 00 00 6f 15 1a 70 40 00 Error: WP at LBA = 0x6f151a70 = 1863654000
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 68 00 00 20 83 1e 00 40 00 11d+03:55:33.483 WRITE FPDMA QUEUED
61 00 08 00 60 00 00 1f b0 05 e0 40 00 11d+03:55:33.483 WRITE FPDMA QUEUED
61 00 08 00 50 00 00 1d 3b b3 d8 40 00 11d+03:55:33.483 WRITE FPDMA QUEUED
61 00 08 00 48 00 00 1d 3b b3 c8 40 00 11d+03:55:33.482 WRITE FPDMA QUEUED
61 00 10 00 40 00 00 1d 2b 5c b8 40 00 11d+03:55:33.482 WRITE FPDMA QUEUED
Error 2478 [173] occurred at disk power-on lifetime: 47758 hours (1989 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 e8 00 00 6f 15 1a 70 40 00 Error: UNC at LBA = 0x6f151a70 = 1863654000
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 40 00 00 1c 11 47 20 40 00 11d+03:55:32.539 READ FPDMA QUEUED
60 00 08 00 38 00 00 04 3c 06 a0 40 00 11d+03:55:31.117 READ FPDMA QUEUED
60 00 08 00 30 00 00 1c b6 5d 78 40 00 11d+03:55:29.347 READ FPDMA QUEUED
61 00 08 00 20 00 00 08 5c e3 f0 40 00 11d+03:55:29.346 WRITE FPDMA QUEUED
61 00 10 00 18 00 00 08 3c d2 80 40 00 11d+03:55:29.346 WRITE FPDMA QUEUED
Error 2477 [172] occurred at disk power-on lifetime: 47733 hours (1988 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 b0 00 00 71 42 13 40 40 00 Error: UNC at LBA = 0x71421340 = 1900155712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 c0 00 00 1b 2a 85 38 40 00 10d+02:57:59.152 READ FPDMA QUEUED
60 00 08 00 b8 00 00 07 01 33 38 40 00 10d+02:57:57.775 READ FPDMA QUEUED
60 00 08 00 b0 00 00 71 42 13 40 40 00 10d+02:57:56.599 READ FPDMA QUEUED
60 00 08 00 a8 00 00 09 a6 ef b0 40 00 10d+02:57:56.587 READ FPDMA QUEUED
60 00 08 00 a0 00 00 09 a6 d6 48 40 00 10d+02:57:56.587 READ FPDMA QUEUED
Error 2476 [171] occurred at disk power-on lifetime: 47709 hours (1987 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 f0 00 00 71 42 13 40 40 00 Error: UNC at LBA = 0x71421340 = 1900155712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 f8 00 00 04 3c 06 a0 40 00 9d+03:03:08.337 READ FPDMA QUEUED
60 00 08 00 f0 00 00 71 42 13 40 40 00 9d+03:03:08.337 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 9d+03:03:08.336 READ LOG EXT
60 00 08 00 e0 00 00 04 3c 06 a0 40 00 9d+03:03:04.470 READ FPDMA QUEUED
60 00 08 00 d8 00 00 71 42 13 40 40 00 9d+03:03:04.470 READ FPDMA QUEUED
Error 2475 [170] occurred at disk power-on lifetime: 47709 hours (1987 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 d8 00 00 71 42 13 40 40 00 Error: UNC at LBA = 0x71421340 = 1900155712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 e0 00 00 04 3c 06 a0 40 00 9d+03:03:04.470 READ FPDMA QUEUED
60 00 08 00 d8 00 00 71 42 13 40 40 00 9d+03:03:04.470 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 9d+03:03:04.469 READ LOG EXT
60 00 08 00 c8 00 00 04 3c 06 a0 40 00 9d+03:03:00.659 READ FPDMA QUEUED
60 00 08 00 c0 00 00 71 42 13 40 40 00 9d+03:03:00.659 READ FPDMA QUEUED
Error 2474 [169] occurred at disk power-on lifetime: 47709 hours (1987 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 c0 00 00 71 42 13 40 40 00 Error: UNC at LBA = 0x71421340 = 1900155712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 c8 00 00 04 3c 06 a0 40 00 9d+03:03:00.659 READ FPDMA QUEUED
60 00 08 00 c0 00 00 71 42 13 40 40 00 9d+03:03:00.659 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 9d+03:03:00.658 READ LOG EXT
61 00 10 00 b0 00 00 1c 5a e7 e0 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 1c 5a e7 c0 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
Error 2473 [168] occurred at disk power-on lifetime: 47709 hours (1987 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 30 00 00 71 42 13 40 40 00 Error: WP at LBA = 0x71421340 = 1900155712
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 b0 00 00 1c 5a e7 e0 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 1c 5a e7 c0 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
61 00 08 00 a0 00 00 1b af 00 f0 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
61 00 08 00 98 00 00 17 83 cb 80 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
61 00 10 00 90 00 00 17 83 cb 58 40 00 9d+03:02:59.679 WRITE FPDMA QUEUED
Error 2472 [167] occurred at disk power-on lifetime: 47709 hours (1987 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 78 00 00 4e 17 bb 98 40 00 Error: UNC at LBA = 0x4e17bb98 = 1310178200
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 78 00 00 4e 17 bb 98 40 00 9d+02:42:29.537 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 9d+02:42:29.536 READ LOG EXT
60 00 08 00 68 00 00 4e 17 bb 98 40 00 9d+02:42:25.692 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 9d+02:42:25.691 READ LOG EXT
60 00 08 00 58 00 00 4e 17 bb 98 40 00 9d+02:42:21.869 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1738 -
# 2 Short offline Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 24/43 Celsius
Lifetime Min/Max Temperature: 11/56 Celsius
Specified Max Operating Temperature: 33 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 15/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 478 (362)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 3061 --- Lifetime Power-On Resets
0x01 0x010 4 50036 --- Power-on Hours
0x01 0x018 6 45115823312 --- Logical Sectors Written
0x01 0x020 6 1089038270 --- Number of Write Commands
0x01 0x028 6 27260037464 --- Logical Sectors Read
0x01 0x030 6 551517478 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 11584 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 49962 --- Spindle Motor Power-on Hours
0x03 0x010 4 40994 --- Head Flying Hours
0x03 0x018 4 1578112 --- Head Load Events
0x03 0x020 4 16376 --- Number of Reallocated Logical Sectors
0x03 0x028 4 4857 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 2478 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x010 1 38 N-- Average Short Term Temperature
0x05 0x018 1 41 N-- Average Long Term Temperature
0x05 0x020 1 56 --- Highest Temperature
0x05 0x028 1 11 --- Lowest Temperature
0x05 0x030 1 46 N-- Highest Average Short Term Temperature
0x05 0x038 1 22 N-- Lowest Average Short Term Temperature
0x05 0x040 1 41 N-- Highest Average Long Term Temperature
0x05 0x048 1 26 N-- Lowest Average Long Term Temperature
0x05 0x050 4 67 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 112 --- Time in Under-Temperature
0x05 0x068 1 15 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 3489 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 83 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC