80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ01/MQ01ABD100/9791C7652C50
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

371 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AX002J
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Nov 23 18:18:55 2023 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 21) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 259) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1858
4 Start_Stop_Count -O--CK 100 100 000 - 1507
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 068 068 000 - 12985
10 Spin_Retry_Count PO--CK 130 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1480
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1954
192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
193 Load_Cycle_Count -O--CK 099 099 000 - 17094
194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max -2/47)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 24
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 068 068 000 - 12817
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 185
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 654 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 654 [141] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 10 00 00 03 07 a2 38 40 00 Error: WP at LBA = 0x0307a238 = 50831928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 58 00 00 0b 6d 66 a0 40 00 12:25:11.490 WRITE FPDMA QUEUED
61 01 00 00 50 00 00 0b 6d 65 a0 40 00 12:25:11.490 WRITE FPDMA QUEUED
61 01 00 00 48 00 00 0b 6d 64 a0 40 00 12:25:11.490 WRITE FPDMA QUEUED
61 01 00 00 40 00 00 0b 6d 63 a0 40 00 12:25:11.490 WRITE FPDMA QUEUED
61 01 00 00 38 00 00 0b 6d 62 a0 40 00 12:25:11.490 WRITE FPDMA QUEUED
Error 653 [140] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 10 00 00 03 07 a2 38 40 00 Error: WP at LBA = 0x0307a238 = 50831928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 20 00 00 0b e6 34 b0 40 00 12:25:09.344 WRITE FPDMA QUEUED
60 00 30 00 00 00 00 02 6f e1 10 40 00 12:25:05.601 READ FPDMA QUEUED
60 00 80 00 10 00 00 03 07 a2 08 40 00 12:25:05.596 READ FPDMA QUEUED
60 00 20 00 08 00 00 01 c4 05 78 40 00 12:25:05.587 READ FPDMA QUEUED
60 00 30 00 00 00 00 02 6f e0 e8 40 00 12:25:05.586 READ FPDMA QUEUED
Error 652 [139] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 08 00 00 03 07 a2 38 40 00 Error: UNC at LBA = 0x0307a238 = 50831928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 28 00 18 00 00 00 23 10 68 40 00 12:25:05.489 READ FPDMA QUEUED
60 00 80 00 08 00 00 03 07 a1 f8 40 00 12:25:01.718 READ FPDMA QUEUED
60 00 18 00 08 00 00 0e 0f c1 c8 40 00 12:25:01.708 READ FPDMA QUEUED
60 00 38 00 08 00 00 0e 0f c1 a8 40 00 12:25:01.707 READ FPDMA QUEUED
60 00 38 00 08 00 00 0e 0f c1 80 40 00 12:25:01.707 READ FPDMA QUEUED
Error 651 [138] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 20 00 00 03 07 a2 38 40 00 Error: WP at LBA = 0x0307a238 = 50831928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 18 00 00 0b e6 24 b0 40 00 12:25:01.445 WRITE FPDMA QUEUED
60 00 10 00 00 00 00 02 6f e1 c8 40 00 12:24:57.688 READ FPDMA QUEUED
60 01 00 00 58 00 00 03 07 a7 a8 40 00 12:24:57.678 READ FPDMA QUEUED
60 01 00 00 50 00 00 03 07 a6 a8 40 00 12:24:57.678 READ FPDMA QUEUED
60 01 00 00 48 00 00 03 07 a5 a8 40 00 12:24:57.678 READ FPDMA QUEUED
Error 650 [137] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 18 00 00 03 07 a2 38 40 00 Error: UNC at LBA = 0x0307a238 = 50831928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 98 00 00 01 79 6a 28 40 00 12:24:57.557 READ FPDMA QUEUED
60 01 00 00 90 00 00 03 07 af a8 40 00 12:24:53.586 READ FPDMA QUEUED
60 01 00 00 88 00 00 03 07 ae a8 40 00 12:24:53.586 READ FPDMA QUEUED
60 01 00 00 80 00 00 03 07 ad a8 40 00 12:24:53.586 READ FPDMA QUEUED
60 01 00 00 78 00 00 03 07 ac a8 40 00 12:24:53.586 READ FPDMA QUEUED
Error 649 [136] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 28 00 00 03 07 98 e0 40 00 Error: UNC at LBA = 0x030798e0 = 50829536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 70 00 00 0d d4 5c a0 40 00 12:24:49.010 READ FPDMA QUEUED
61 00 08 00 60 00 00 00 7b d7 58 40 00 12:24:49.010 WRITE FPDMA QUEUED
61 00 18 00 58 00 00 00 79 07 e0 40 00 12:24:49.009 WRITE FPDMA QUEUED
60 00 08 00 50 00 00 04 43 b1 40 40 00 12:24:49.009 READ FPDMA QUEUED
60 00 10 00 48 00 00 0e 0f c1 68 40 00 12:24:49.008 READ FPDMA QUEUED
Error 648 [135] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 70 00 00 03 07 98 e0 40 00 Error: WP at LBA = 0x030798e0 = 50829536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 01 00 00 18 00 00 08 e4 ea d0 40 00 12:24:45.030 WRITE FPDMA QUEUED
61 01 00 00 20 00 00 0d 6b 76 40 40 00 12:24:45.030 WRITE FPDMA QUEUED
61 01 00 00 00 00 00 0d 6b 75 40 40 00 12:24:45.030 WRITE FPDMA QUEUED
61 01 00 00 f8 00 00 08 e4 e9 d0 40 00 12:24:45.029 WRITE FPDMA QUEUED
61 01 00 00 d0 00 00 0d 6b 74 40 40 00 12:24:45.029 WRITE FPDMA QUEUED
Error 647 [134] occurred at disk power-on lifetime: 12753 hours (531 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 03 07 98 e0 40 00 Error: WP at LBA = 0x030798e0 = 50829536
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 70 00 68 00 00 00 75 3e 70 40 00 12:24:42.101 WRITE FPDMA QUEUED
61 00 08 00 60 00 00 08 f0 3c 38 40 00 12:24:41.569 WRITE FPDMA QUEUED
60 00 10 00 10 00 00 03 01 5f 98 40 00 12:24:41.098 READ FPDMA QUEUED
60 00 08 00 30 00 00 0d d4 0f 60 40 00 12:24:41.082 READ FPDMA QUEUED
61 01 00 00 58 00 00 08 e4 e2 d0 40 00 12:24:41.065 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 50% 1137 -
# 2 Short offline Completed without error 00% 1085 -
# 3 Short offline Completed without error 00% 1053 -
# 4 Short offline Completed without error 00% 1042 -
# 5 Short offline Completed without error 00% 995 -
# 6 Short offline Completed without error 00% 985 -
# 7 Short offline Completed without error 00% 922 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 32/34 Celsius
Lifetime Min/Max Temperature: -2/47 Celsius
Under/Over Temperature Limit Count: 8/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (263)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 1480 --- Lifetime Power-On Resets
0x01 0x010 4 12985 --- Power-on Hours
0x01 0x018 6 19223479948 --- Logical Sectors Written
0x01 0x020 6 411430738 --- Number of Write Commands
0x01 0x028 6 25098579585 --- Logical Sectors Read
0x01 0x030 6 433191573 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 1954 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 12780 --- Spindle Motor Power-on Hours
0x03 0x010 4 12817 --- Head Flying Hours
0x03 0x018 4 17094 --- Head Load Events
0x03 0x020 4 296 --- Number of Reallocated Logical Sectors
0x03 0x028 4 8 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 654 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 3 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 32 --- Current Temperature
0x05 0x010 1 33 N-- Average Short Term Temperature
0x05 0x018 1 34 N-- Average Long Term Temperature
0x05 0x020 1 47 --- Highest Temperature
0x05 0x028 1 -2 --- Lowest Temperature
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
0x05 0x038 1 28 N-- Lowest Average Short Term Temperature
0x05 0x040 1 37 N-- Highest Average Long Term Temperature
0x05 0x048 1 34 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 5 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1848 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 21 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink