1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
2023-02-14 01:25:13 +03:00

365 lines
19 KiB
Plaintext

smartctl 7.3 2022-02-28 r5338 [FreeBSD 14.0-CURRENT amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AX001U
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jul 27 09:38:30 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 236) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 2044
4 Start_Stop_Count -O--CK 100 100 000 - 3928
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 400
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 093 093 000 - 3007
10 Spin_Retry_Count PO--CK 178 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 2445
191 G-Sense_Error_Rate -O--CK 100 100 000 - 22
192 Power-Off_Retract_Count -O--CK 097 097 000 - 1693
193 Load_Cycle_Count -O--CK 100 100 000 - 4808
194 Temperature_Celsius -O---K 100 100 000 - 30 (Min/Max 14/54)
196 Reallocated_Event_Count -O--CK 100 100 000 - 5
197 Current_Pending_Sector -O--CK 100 100 000 - 1960
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 098 098 000 - 1171
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 172
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 64169 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 64169 [168] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 74 65 d3 38 44 00 Error: UNC 8 sectors at LBA = 0x7465d338 = 1952830264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 00 08 00 00 74 65 d3 38 40 00 07:24:33.563 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 38 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 30 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 28 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 20 40 00 07:24:29.778 READ DMA EXT
Error 64168 [167] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 74 65 d3 38 44 00 Error: UNC 8 sectors at LBA = 0x7465d338 = 1952830264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 00 08 00 00 74 65 d3 38 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 30 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 28 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 20 40 00 07:24:29.778 READ DMA EXT
25 00 da 00 08 00 00 74 65 d3 18 40 00 07:24:29.778 READ DMA EXT
Error 64167 [166] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 04 18 00 00 74 65 d3 38 44 00 Error: UNC 1048 sectors at LBA = 0x7465d338 = 1952830264
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 08 00 00 00 74 65 cf 50 40 00 07:24:24.981 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 58 40 00 07:24:21.133 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 50 40 00 07:24:21.132 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 48 40 00 07:24:21.132 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 40 40 00 07:24:21.132 READ DMA EXT
Error 64166 [165] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 74 65 d1 58 44 00 Error: UNC 8 sectors at LBA = 0x7465d158 = 1952829784
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 00 08 00 00 74 65 d1 58 40 00 07:24:21.133 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 50 40 00 07:24:21.132 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 48 40 00 07:24:21.132 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 40 40 00 07:24:21.132 READ DMA EXT
25 00 da 00 08 00 00 74 65 d1 38 40 00 07:24:21.132 READ DMA EXT
Error 64165 [164] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 07 d0 00 00 74 65 d0 c0 44 00 Error: UNC 2000 sectors at LBA = 0x7465d0c0 = 1952829632
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 08 00 00 00 74 65 d0 90 40 00 07:24:15.986 READ DMA EXT
25 00 da 00 08 00 00 74 65 d0 88 40 00 07:24:15.985 READ DMA EXT
25 00 da 00 08 00 00 74 65 d0 80 40 00 07:24:15.985 READ DMA EXT
25 00 da 00 08 00 00 74 65 d0 78 40 00 07:24:15.985 READ DMA EXT
25 00 da 00 08 00 00 74 65 d0 70 40 00 07:24:15.985 READ DMA EXT
Error 64164 [163] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 74 65 c5 b8 44 00 Error: UNC 8 sectors at LBA = 0x7465c5b8 = 1952826808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 00 08 00 00 74 65 c5 b8 40 00 07:24:10.385 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 b8 40 00 07:24:06.585 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 b0 40 00 07:24:06.584 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 a8 40 00 07:24:06.584 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 a0 40 00 07:24:06.584 READ DMA EXT
Error 64163 [162] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 74 65 c5 b8 44 00 Error: UNC 8 sectors at LBA = 0x7465c5b8 = 1952826808
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 00 08 00 00 74 65 c5 b8 40 00 07:24:06.585 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 b0 40 00 07:24:06.584 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 a8 40 00 07:24:06.584 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 a0 40 00 07:24:06.584 READ DMA EXT
25 00 da 00 08 00 00 74 65 c5 98 40 00 07:24:06.584 READ DMA EXT
Error 64162 [161] occurred at disk power-on lifetime: 2975 hours (123 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 06 a0 00 00 74 65 c9 f0 44 00 Error: UNC 1696 sectors at LBA = 0x7465c9f0 = 1952827888
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 da 08 00 00 00 74 65 c8 90 40 00 07:24:02.705 READ DMA EXT
25 00 da 08 00 00 00 74 65 c0 90 40 00 07:23:58.889 READ DMA EXT
25 00 da 08 00 00 00 74 65 b8 90 40 00 07:23:56.737 READ DMA EXT
25 00 da 08 00 00 00 74 65 b0 90 40 00 07:23:56.385 READ DMA EXT
25 00 da 08 00 00 00 74 65 a8 90 40 00 07:23:55.165 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 26/30 Celsius
Lifetime Min/Max Temperature: 14/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (268)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 2445 --- Lifetime Power-On Resets
0x01 0x010 4 3007 --- Power-on Hours
0x01 0x018 6 11974725430 --- Logical Sectors Written
0x01 0x020 6 88523345 --- Number of Write Commands
0x01 0x028 6 21750853992 --- Logical Sectors Read
0x01 0x030 6 171464068 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 22 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 1245 --- Spindle Motor Power-on Hours
0x03 0x010 4 1171 --- Head Flying Hours
0x03 0x018 4 4808 --- Head Load Events
0x03 0x020 4 400 --- Number of Reallocated Logical Sectors
0x03 0x028 4 4954 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 64153 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 125 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 30 --- Current Temperature
0x05 0x010 1 35 N-- Average Short Term Temperature
0x05 0x018 1 35 N-- Average Long Term Temperature
0x05 0x020 1 54 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 44 N-- Highest Average Short Term Temperature
0x05 0x038 1 24 N-- Lowest Average Short Term Temperature
0x05 0x040 1 36 N-- Highest Average Long Term Temperature
0x05 0x048 1 35 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 3323 --- Number of Hardware Resets
0x06 0x018 4 1 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 5 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 6 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC