80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ01/MQ01ABF050/D03A714994BD
Andrey Ponomarenko 785ce3d324 Update of reports (new: 0, modified: 424)
2023-02-17 09:04:26 +03:00

365 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABF...
Device Model: TOSHIBA MQ01ABF050
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AM0P3M
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Aug 27 06:45:54 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 125) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 098 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 1360
4 Start_Stop_Count -O--CK 100 100 000 - 4823
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 9560
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 063 063 000 - 15116
10 Spin_Retry_Count PO--CK 196 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 4161
191 G-Sense_Error_Rate -O--CK 100 100 000 - 260
192 Power-Off_Retract_Count -O--CK 100 100 000 - 46
193 Load_Cycle_Count -O--CK 094 094 000 - 63772
194 Temperature_Celsius -O---K 100 100 000 - 27 (Min/Max 15/49)
196 Reallocated_Event_Count -O--CK 100 100 000 - 58
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 063 063 000 - 14812
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 255
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 65535 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 [178] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 28 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 48 00 00 00 21 74 72 40 00 00:05:21.522 READ FPDMA QUEUED
61 00 01 00 40 00 00 00 0d 56 a8 40 00 00:05:21.211 WRITE FPDMA QUEUED
60 00 08 00 38 00 00 00 64 dd c0 40 00 00:05:21.211 READ FPDMA QUEUED
61 00 10 00 30 00 00 00 61 84 b0 40 00 00:05:21.211 WRITE FPDMA QUEUED
60 00 08 00 28 00 00 33 42 e8 90 40 00 00:05:21.211 READ FPDMA QUEUED
Error 65534 [177] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 60 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 10 00 00 00 0d 56 a8 40 00 00:05:17.537 READ FPDMA QUEUED
60 00 08 00 08 00 00 00 64 d1 58 40 00 00:05:17.313 READ FPDMA QUEUED
60 00 08 00 f8 00 00 02 fa e3 d8 40 00 00:05:17.306 READ FPDMA QUEUED
60 00 08 00 f0 00 00 00 65 79 10 40 00 00:05:17.297 READ FPDMA QUEUED
60 00 08 00 e8 00 00 00 65 83 e0 40 00 00:05:17.292 READ FPDMA QUEUED
Error 65533 [176] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 10 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 01 00 18 00 00 00 0d 53 98 40 00 00:05:13.422 READ FPDMA QUEUED
60 00 08 00 10 00 00 33 42 e8 90 40 00 00:05:13.421 READ FPDMA QUEUED
61 00 08 00 08 00 00 00 4d aa a8 40 00 00:05:13.421 WRITE FPDMA QUEUED
61 00 08 00 f8 00 00 00 04 0c 00 40 00 00:05:13.421 WRITE FPDMA QUEUED
60 00 01 00 f0 00 00 00 0d fd 91 40 00 00:05:13.409 READ FPDMA QUEUED
Error 65532 [175] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 d8 00 00 33 42 e8 90 40 00 Error: WP at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 e0 00 00 00 61 84 a8 40 00 00:05:09.563 WRITE FPDMA QUEUED
60 00 08 00 d8 00 00 33 42 e8 90 40 00 00:05:09.563 READ FPDMA QUEUED
60 00 08 00 d0 00 00 00 13 b9 fa 40 00 00:05:09.563 READ FPDMA QUEUED
61 00 30 00 c8 00 00 00 61 a5 90 40 00 00:05:09.562 WRITE FPDMA QUEUED
60 00 08 00 c0 00 00 00 14 b7 f2 40 00 00:05:09.557 READ FPDMA QUEUED
Error 65531 [174] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 58 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 70 00 00 01 0e db 38 40 00 00:05:05.688 READ FPDMA QUEUED
61 00 10 00 68 00 00 00 a8 6f 60 40 00 00:05:05.687 WRITE FPDMA QUEUED
61 00 80 00 60 00 00 00 43 00 c0 40 00 00:05:05.687 WRITE FPDMA QUEUED
60 00 08 00 58 00 00 33 42 e8 90 40 00 00:05:05.687 READ FPDMA QUEUED
61 00 08 00 50 00 00 00 61 84 28 40 00 00:05:05.687 WRITE FPDMA QUEUED
Error 65530 [173] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 20 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 28 00 00 01 c0 ac 38 40 00 00:05:01.914 READ FPDMA QUEUED
60 00 08 00 20 00 00 33 42 e8 90 40 00 00:05:01.838 READ FPDMA QUEUED
60 00 10 00 18 00 00 03 08 17 e8 40 00 00:05:01.838 READ FPDMA QUEUED
61 01 00 00 10 00 00 03 eb b7 e0 40 00 00:05:01.838 WRITE FPDMA QUEUED
61 00 08 00 08 00 00 00 03 f7 b8 40 00 00:05:01.838 WRITE FPDMA QUEUED
Error 65529 [172] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 70 00 00 33 42 e8 90 40 00 Error: UNC at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 08 00 f8 00 00 03 08 18 a0 40 00 00:04:58.033 READ FPDMA QUEUED
60 00 08 00 f0 00 00 00 0e 34 a0 40 00 00:04:58.030 READ FPDMA QUEUED
60 00 08 00 e8 00 00 03 c3 ed c8 40 00 00:04:58.027 READ FPDMA QUEUED
60 00 08 00 e0 00 00 03 c3 ed c0 40 00 00:04:58.027 READ FPDMA QUEUED
60 00 08 00 d8 00 00 03 c3 ed b0 40 00 00:04:58.026 READ FPDMA QUEUED
Error 65528 [171] occurred at disk power-on lifetime: 15085 hours (628 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 40 00 00 33 42 e8 90 40 00 Error: WP at LBA = 0x3342e890 = 860022928
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 48 00 00 00 61 84 a8 40 00 00:04:54.187 WRITE FPDMA QUEUED
60 00 08 00 40 00 00 33 42 e8 90 40 00 00:04:54.187 READ FPDMA QUEUED
61 00 60 00 38 00 00 00 61 a5 30 40 00 00:04:54.186 WRITE FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 e0 00 00:04:54.185 READ LOG EXT
60 00 40 00 30 00 00 33 42 e8 90 40 00 00:04:50.380 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 27 Celsius
Power Cycle Min/Max Temperature: 27/27 Celsius
Lifetime Min/Max Temperature: 15/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (172)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 4161 --- Lifetime Power-On Resets
0x01 0x010 4 15116 --- Power-on Hours
0x01 0x018 6 38667810570 --- Logical Sectors Written
0x01 0x020 6 681050367 --- Number of Write Commands
0x01 0x028 6 46825152516 --- Logical Sectors Read
0x01 0x030 6 659401865 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 260 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 1426 --- Spindle Motor Power-on Hours
0x03 0x010 4 14812 --- Head Flying Hours
0x03 0x018 4 63772 --- Head Load Events
0x03 0x020 4 9560 --- Number of Reallocated Logical Sectors
0x03 0x028 4 181 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 72781 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 122 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 27 --- Current Temperature
0x05 0x010 1 30 N-- Average Short Term Temperature
0x05 0x018 1 31 N-- Average Long Term Temperature
0x05 0x020 1 49 --- Highest Temperature
0x05 0x028 1 15 --- Lowest Temperature
0x05 0x030 1 41 N-- Highest Average Short Term Temperature
0x05 0x038 1 27 N-- Lowest Average Short Term Temperature
0x05 0x040 1 37 N-- Highest Average Long Term Temperature
0x05 0x048 1 30 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 8150 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 25 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink