80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ01/MQ01ACF032/7D1A6E330965
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

365 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ01ACF032
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: AV001C
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 17 21:32:13 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 50) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
2 Throughput_Performance POS--K 100 100 050 - 0
3 Spin_Up_Time PO---K 100 100 002 - 1946
4 Start_Stop_Count -O--CK 100 100 000 - 908
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-K 100 100 050 - 0
8 Seek_Time_Performance P-S--K 100 100 050 - 0
9 Power_On_Hours -O--CK 076 076 000 - 9701
10 Spin_Retry_Count PO--CK 118 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 853
183 Runtime_Bad_Block -O--CK 100 100 001 - 442
184 End-to-End_Error PO--CK 100 100 097 - 0
185 Unknown_Attribute -O--CK 100 100 001 - 65535
187 Reported_Uncorrect -O--CK 001 001 000 - 583
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 001 - 0
190 Airflow_Temperature_Cel -O---K 062 053 040 - 38 (Min/Max 22/40)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 65
192 Power-Off_Retract_Count -O---K 100 100 000 - 4522053
193 Load_Cycle_Count -O--CK 090 090 000 - 103701
194 Temperature_Celsius -O---K 062 053 040 - 38 (Min/Max 22/40)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 583 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 583 [70] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:09.545 READ DMA EXT
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:06.622 READ DMA EXT
25 00 00 00 46 00 00 04 f6 e0 a8 e0 00 01:31:06.621 READ DMA EXT
25 00 00 00 80 00 00 04 f6 e0 28 e0 00 01:31:06.619 READ DMA EXT
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:03.692 READ DMA EXT
Error 582 [69] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:06.622 READ DMA EXT
25 00 00 00 46 00 00 04 f6 e0 a8 e0 00 01:31:06.621 READ DMA EXT
25 00 00 00 80 00 00 04 f6 e0 28 e0 00 01:31:06.619 READ DMA EXT
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:03.692 READ DMA EXT
25 00 00 00 08 00 00 04 f6 e0 20 e0 00 01:31:03.692 READ DMA EXT
Error 581 [68] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:03.692 READ DMA EXT
25 00 00 00 08 00 00 04 f6 e0 20 e0 00 01:31:03.692 READ DMA EXT
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:00.761 READ DMA EXT
25 00 00 00 70 00 00 00 15 d4 e0 e0 00 01:31:00.756 READ DMA EXT
25 00 00 00 08 00 00 00 15 d9 50 e0 00 01:31:00.755 READ DMA EXT
Error 580 [67] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:31:00.761 READ DMA EXT
25 00 00 00 70 00 00 00 15 d4 e0 e0 00 01:31:00.756 READ DMA EXT
25 00 00 00 08 00 00 00 15 d9 50 e0 00 01:31:00.755 READ DMA EXT
25 00 00 00 28 00 00 00 15 d7 c0 e0 00 01:31:00.754 READ DMA EXT
25 00 00 00 80 00 00 00 15 d7 40 e0 00 01:31:00.727 READ DMA EXT
Error 579 [66] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:29:30.417 READ DMA EXT
25 00 00 00 10 00 00 00 7d 2b 58 e0 00 01:29:30.417 READ DMA EXT
25 00 00 00 70 00 00 00 15 dd c8 e0 00 01:29:30.415 READ DMA EXT
25 00 00 00 80 00 00 00 15 dd 48 e0 00 01:29:30.413 READ DMA EXT
25 00 00 00 80 00 00 00 15 dc c8 e0 00 01:29:30.411 READ DMA EXT
Error 578 [65] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 00 15 dc 00 e0 00 Error: UNC 8 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 15 dc 00 e0 00 01:29:27.484 READ DMA EXT
25 00 00 00 08 00 00 00 7d 2b 50 e0 00 01:29:27.478 READ DMA EXT
25 00 00 00 40 00 00 00 15 dc 08 e0 00 01:29:27.467 READ DMA EXT
25 00 00 00 08 00 00 00 15 db f8 e0 00 01:29:27.447 READ DMA EXT
25 00 00 00 08 00 00 1b 49 04 c8 e0 00 01:29:27.432 READ DMA EXT
Error 577 [64] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 00 15 dc 00 e0 00 Error: UNC 64 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 40 00 00 00 15 dc 00 e0 00 01:29:24.507 READ DMA EXT
25 00 00 00 08 00 00 00 15 db f0 e0 00 01:29:24.498 READ DMA EXT
25 00 00 00 12 00 00 00 9b b6 88 e0 00 01:29:24.497 READ DMA EXT
25 00 00 00 40 00 00 00 15 db f8 e0 00 01:29:21.563 READ DMA EXT
25 00 00 00 08 00 00 00 15 db e8 e0 00 01:29:21.562 READ DMA EXT
Error 576 [63] occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 38 00 00 00 15 dc 00 e0 00 Error: UNC 56 sectors at LBA = 0x0015dc00 = 1432576
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 40 00 00 00 15 db f8 e0 00 01:29:21.563 READ DMA EXT
25 00 00 00 08 00 00 00 15 db e8 e0 00 01:29:21.562 READ DMA EXT
25 00 00 00 08 00 00 00 9b b6 80 e0 00 01:29:21.554 READ DMA EXT
25 00 00 00 48 00 00 00 15 db f0 e0 00 01:29:18.621 READ DMA EXT
25 00 00 00 08 00 00 00 15 db e0 e0 00 01:29:18.621 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 3 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 22/40 Celsius
Lifetime Min/Max Temperature: 9/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (448)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 853 --- Lifetime Power-On Resets
0x01 0x010 4 9701 --- Power-on Hours
0x01 0x018 6 14958793891 --- Logical Sectors Written
0x01 0x020 6 235357370 --- Number of Write Commands
0x01 0x028 6 31765621669 --- Logical Sectors Read
0x01 0x030 6 636062282 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 65 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 9675 --- Spindle Motor Power-on Hours
0x03 0x010 4 9402 --- Head Flying Hours
0x03 0x018 4 103701 --- Head Load Events
0x03 0x020 4 96 --- Number of Reallocated Logical Sectors
0x03 0x028 4 28 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 583 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 --- Current Temperature
0x05 0x010 1 34 N-- Average Short Term Temperature
0x05 0x018 1 32 N-- Average Long Term Temperature
0x05 0x020 1 47 --- Highest Temperature
0x05 0x028 1 9 --- Lowest Temperature
0x05 0x030 1 38 N-- Highest Average Short Term Temperature
0x05 0x038 1 27 N-- Lowest Average Short Term Temperature
0x05 0x040 1 35 N-- Highest Average Long Term Temperature
0x05 0x048 1 31 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 868 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 16 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 19 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink