80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MQ03/MQ03ABB200/199AF8B27AB2
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

371 lines
19 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ03ABB...
Device Model: TOSHIBA MQ03ABB200
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: JP050U
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 4 03:42:10 2024 +04
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 362) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 3904
4 Start_Stop_Count -O--CK 100 100 000 - 1929
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 095 095 000 - 2248
10 Spin_Retry_Count PO--CK 138 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 280
191 G-Sense_Error_Rate -O--CK 100 100 000 - 8
192 Power-Off_Retract_Count -O--CK 100 100 000 - 113
193 Load_Cycle_Count -O--CK 100 100 000 - 9722
194 Temperature_Celsius -O---K 100 100 000 - 26 (Min/Max 14/48)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 42
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 100 100 000 - 173
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 268
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 12288 Current Device Internal Status Data log
0x25 GPL R/O 12288 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa7 GPL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 42
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 42 [41] occurred at disk power-on lifetime: 72 hours (3 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 23 32 63 3b 40 00 Error: ICRC, ABRT at LBA = 0x2332633b = 590504763
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 04 00 00 00 00 00 23 32 5f 3c 40 00 00:26:37.484 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 23 32 5b 3c 40 00 00:26:37.432 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 23 32 57 3c 40 00 00:26:37.429 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 23 32 53 3c 40 00 00:26:37.425 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 23 32 4f 3c 40 00 00:26:37.422 WRITE FPDMA QUEUED
Error 41 [40] occurred at disk power-on lifetime: 59 hours (2 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 50 00 00 00 00 05 12 f7 fb 40 00 at LBA = 0x0512f7fb = 85129211
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 05 12 f3 fc 40 00 03:30:13.905 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 03:30:12.595 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 03:30:12.595 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 03:30:12.595 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 03:30:12.594 IDENTIFY DEVICE
Error 40 [39] occurred at disk power-on lifetime: 59 hours (2 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 04 e3 23 bb 40 00 Error: ICRC, ABRT at LBA = 0x04e323bb = 81994683
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 04 00 00 08 00 00 04 e3 23 bc 40 00 03:24:30.566 WRITE FPDMA QUEUED
61 04 00 00 00 00 00 04 e3 1f bc 40 00 03:24:30.566 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 04 e3 1b bc 40 00 03:24:30.556 WRITE FPDMA QUEUED
61 04 00 00 00 00 00 04 e3 17 bc 40 00 03:24:30.554 WRITE FPDMA QUEUED
61 04 00 00 08 00 00 04 e3 13 bc 40 00 03:24:30.549 WRITE FPDMA QUEUED
Error 39 [38] occurred at disk power-on lifetime: 59 hours (2 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 50 00 00 00 00 33 78 58 bb 40 00 at LBA = 0x337858bb = 863525051
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 33 78 54 bc 40 00 03:05:01.912 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 03:05:00.644 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 03:05:00.644 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 03:05:00.644 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 03:05:00.643 IDENTIFY DEVICE
Error 38 [37] occurred at disk power-on lifetime: 58 hours (2 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 33 6c 6e fb 40 00 Error: ICRC, ABRT at LBA = 0x336c6efb = 862744315
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 33 6c 6a fc 40 00 03:03:29.257 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 03:03:27.964 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 03:03:27.964 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 03:03:27.964 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 03:03:27.963 IDENTIFY DEVICE
Error 37 [36] occurred at disk power-on lifetime: 58 hours (2 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 33 32 b7 bb 40 00 Error: ICRC, ABRT at LBA = 0x3332b7bb = 858961851
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 33 32 b3 bc 40 00 02:57:48.060 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:57:46.766 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 02:57:46.766 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 02:57:46.766 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 02:57:46.765 IDENTIFY DEVICE
Error 36 [35] occurred at disk power-on lifetime: 58 hours (2 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 32 e7 68 7b 40 00 Error: ICRC, ABRT at LBA = 0x32e7687b = 854026363
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 32 e7 64 7c 40 00 02:49:53.928 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:52.632 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 02:49:52.631 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 02:49:52.631 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 02:49:52.631 IDENTIFY DEVICE
Error 35 [34] occurred at disk power-on lifetime: 58 hours (2 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 50 00 00 00 00 32 e5 e8 7b 40 00 at LBA = 0x32e5e87b = 853928059
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 00 00 00 32 e5 e4 7c 40 00 02:49:33.912 WRITE DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 00 02:49:32.675 SET FEATURES [Enable write cache]
ef 00 90 00 06 00 00 00 00 00 00 00 00 02:49:32.675 SET FEATURES [Disable SATA feature]
e1 00 00 00 02 00 00 00 00 00 00 00 00 02:49:32.675 IDLE IMMEDIATE
ec 00 00 00 01 00 00 00 00 00 00 00 00 02:49:32.674 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 26 Celsius
Power Cycle Min/Max Temperature: 26/29 Celsius
Lifetime Min/Max Temperature: 14/48 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (306)
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 280 --- Lifetime Power-On Resets
0x01 0x010 4 2248 --- Power-on Hours
0x01 0x018 6 4316113922 --- Logical Sectors Written
0x01 0x020 6 18472331 --- Number of Write Commands
0x01 0x028 6 2977347100 --- Logical Sectors Read
0x01 0x030 6 16039551 --- Number of Read Commands
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 8 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 278 --- Spindle Motor Power-on Hours
0x03 0x010 4 173 --- Head Flying Hours
0x03 0x018 4 9722 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 4207 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 26 --- Current Temperature
0x05 0x010 1 26 N-- Average Short Term Temperature
0x05 0x018 1 24 N-- Average Long Term Temperature
0x05 0x020 1 48 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 36 N-- Highest Average Short Term Temperature
0x05 0x038 1 21 N-- Lowest Average Short Term Temperature
0x05 0x040 1 26 N-- Highest Average Long Term Temperature
0x05 0x048 1 24 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 17265 --- Number of Hardware Resets
0x06 0x018 4 42 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 13 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink