mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
121 lines
4.8 KiB
Plaintext
121 lines
4.8 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p10 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Apacer SDM5/5A/5A-M Series SSD Module
|
|
Device Model: 16GB SATA Flash Drive
|
|
Serial Number: --
|
|
Firmware Version: SFDE001A
|
|
User Capacity: 16,013,942,784 bytes [16.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Mon Apr 1 14:41:45 2024 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Read SCT Status failed: Input/output error
|
|
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 255) Self-test routine in progress...
|
|
150% of test remaining.
|
|
Total time to complete Offline
|
|
data collection: ( 32) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
SCT capabilities: (0x0039) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
9 Power_On_Hours -O--C- 100 100 000 - 53236
|
|
12 Power_Cycle_Count -O--C- 100 100 000 - 30
|
|
167 SSD_Write_Protect_Mode -O---K 100 100 000 - 0
|
|
168 SATA_PHY_Err_Ct -O--C- 100 100 000 - 1
|
|
175 Bad_Cluster_Table_Count PO--C- 100 100 010 - 0
|
|
192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 27
|
|
194 Temperature_Celsius PO---K 100 100 000 - 40 (Min/Max 30/60)
|
|
163 Max_Erase_Count ------ 100 100 001 - 1663
|
|
164 Average_Erase_Count ------ 100 100 001 - 1608
|
|
166 Grown_Bad_Block_Count ------ 100 100 010 - 0
|
|
241 Total_LBAs_Written ------ 100 100 000 - 2554160821
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 51 Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
0xe0 SL R/W 1 SCT Command/Status
|
|
0xe1 SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
Read SCT Status failed: Input/output error
|
|
|
|
Read SCT Status failed: Input/output error
|
|
SCT (Get) Error Recovery Control command failed
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error
|
|
Read SATA Phy Event Counters failed
|
|
|