mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
191 lines
8.9 KiB
Plaintext
191 lines
8.9 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Apacer SSDs
|
|
Device Model: 32GB SATA Flash Drive
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 dc663a ...
|
|
Firmware Version: SFMB011B
|
|
User Capacity: 32,017,047,552 bytes [32.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, zeroed
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Fri Dec 9 10:21:00 2022 EST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x02) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 33) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 6) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x0039) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 0
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
|
9 Power_On_Hours -O--CK 100 100 000 - 508
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 153
|
|
175 Bad_Cluster_Table_Ct -O--CK 100 100 000 - 0
|
|
176 Erase_Fail_Count_Chip -O--CK 100 100 000 - 0
|
|
177 Wear_Leveling_Count -O--CK 100 100 000 - 66
|
|
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 0
|
|
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 9
|
|
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 220
|
|
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
|
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
194 Temperature_Celsius -O---K 052 037 030 - 48 (Min/Max 20/63)
|
|
195 Hardware_ECC_Recovered POSR-K 100 100 050 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
|
238 Unknown_Attribute -O---K 098 098 000 - 196608066
|
|
239 Unknown_Attribute PO---- 100 100 015 - 0
|
|
241 Total_LBAs_Written -O--CK 100 100 000 - 746934290
|
|
242 Total_LBAs_Read -O--CK 100 100 000 - 58660736
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 51 Comprehensive SMART error log
|
|
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 176 -
|
|
# 2 Short offline Completed without error 00% 19 -
|
|
# 3 Short offline Completed without error 00% 19 -
|
|
# 4 Short offline Completed without error 00% 19 -
|
|
# 5 Short offline Completed without error 00% 2 -
|
|
# 6 Short offline Completed without error 00% 2 -
|
|
# 7 Short offline Completed without error 00% 2 -
|
|
# 8 Short offline Completed without error 00% 2 -
|
|
# 9 Short offline Completed without error 00% 2 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: Active (0)
|
|
Current Temperature: 48 Celsius
|
|
Power Cycle Min/Max Temperature: ?/60 Celsius
|
|
Lifetime Min/Max Temperature: ?/ ? Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: -127/127 Celsius
|
|
Min/Max Temperature Limit: -127/127 Celsius
|
|
Temperature History Size (Index): 478 (418)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 80 (8.0 seconds)
|
|
Write: 80 (8.0 seconds)
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 153 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 508 --- Power-on Hours
|
|
0x01 0x018 6 746934290 --- Logical Sectors Written
|
|
0x01 0x020 6 30161386 --- Number of Write Commands
|
|
0x01 0x028 6 58660736 --- Logical Sectors Read
|
|
0x01 0x030 6 655454 --- Number of Read Commands
|
|
0x01 0x038 6 469982507164 --- Date and Time TimeStamp
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 6 N-- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 19 Device-to-host register FISes sent due to a COMRESET
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|