1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
2023-02-17 09:04:26 +03:00

126 lines
6.8 KiB
Plaintext

smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron BX/MX1/2/3/500, M5/600, 1100 SSDs
Device Model: Crucial_CT256MX100SSD1
Serial Number: --
LU WWN Device Id: 5 00a075 ...
Firmware Version: MU02
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jun 11 00:45:45 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1190) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 3) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 27
5 Reallocate_NAND_Blk_Cnt 0x0033 100 100 000 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5804
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4059
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Ave_Block-Erase_Count 0x0032 097 097 000 Old_age Always - 93
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 2555
180 Unused_Reserve_NAND_Blk 0x0033 000 000 000 Pre-fail Always - 2159
183 SATA_Interfac_Downshift 0x0032 100 100 000 Old_age Always - 0
184 Error_Correction_Count 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 058 047 000 Old_age Always - 42 (Min/Max 8/53)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Remain 0x0031 097 097 000 Pre-fail Offline - 3
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0
246 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 30394227755
247 Host_Program_Page_Count 0x0032 100 100 000 Old_age Always - 953534449
248 FTL_Program_Page_Count 0x0032 100 100 000 Old_age Always - 891909166
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 5790 -
# 2 Vendor (0xff) Completed without error 00% 5737 -
# 3 Vendor (0xff) Completed without error 00% 5721 -
# 4 Vendor (0xff) Completed without error 00% 5693 -
# 5 Vendor (0xff) Completed without error 00% 5679 -
# 6 Vendor (0xff) Completed without error 00% 5659 -
# 7 Vendor (0xff) Completed without error 00% 4898 -
# 8 Vendor (0xff) Completed without error 00% 4868 -
# 9 Vendor (0xff) Completed without error 00% 4764 -
#10 Vendor (0xff) Completed without error 00% 4651 -
#11 Vendor (0xff) Completed without error 00% 4379 -
#12 Vendor (0xff) Completed without error 00% 4020 -
#13 Vendor (0xff) Completed without error 00% 3584 -
#14 Vendor (0xff) Completed without error 00% 3113 -
#15 Vendor (0xff) Completed without error 00% 2898 -
#16 Vendor (0xff) Completed without error 00% 2731 -
#17 Vendor (0xff) Completed without error 00% 2667 -
#18 Vendor (0xff) Completed without error 00% 2632 -
#19 Vendor (0xff) Completed without error 00% 2604 -
#20 Vendor (0xff) Completed without error 00% 2319 -
#21 Vendor (0xff) Completed without error 00% 2147 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.