mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
192 lines
9.4 KiB
Plaintext
192 lines
9.4 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p16-HBSD amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: faspeed K5M-32G
|
|
Serial Number: --
|
|
LU WWN Device Id: 0 000000 ...
|
|
Firmware Version: Q0111A
|
|
User Capacity: 31,488,000,000 bytes [31.4 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: mSATA
|
|
TRIM Command: Available
|
|
Device is: Not in smartctl database [for details use: -P showall]
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
|
Local Time is: Sat Jun 12 08:46:42 2021 PDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
See vendor-specific Attribute list for marginal Attributes.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x11) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate ------ 100 100 050 - 0
|
|
5 Reallocated_Sector_Ct -O---- 100 100 050 - 0
|
|
9 Power_On_Hours ------ 100 100 050 - 6071
|
|
12 Power_Cycle_Count ------ 100 100 050 - 54
|
|
160 Unknown_Attribute ------ 100 100 050 - 0
|
|
161 Unknown_Attribute ------ 100 100 050 - 22
|
|
162 Unknown_Attribute ------ 100 100 050 - 1
|
|
163 Unknown_Attribute ------ 100 100 050 - 48
|
|
164 Unknown_Attribute ------ 100 100 050 - 1010633
|
|
165 Unknown_Attribute ------ 100 100 050 - 2073
|
|
166 Unknown_Attribute ------ 100 100 050 - 2020
|
|
167 Unknown_Attribute ------ 100 100 050 - 2021
|
|
168 Unknown_Attribute ------ 100 100 050 - 3000
|
|
169 Unknown_Attribute ------ 033 033 050 NOW 33
|
|
192 Power-Off_Retract_Count ------ 100 100 050 - 46
|
|
194 Temperature_Celsius ------ 100 100 050 - 40
|
|
195 Hardware_ECC_Recovered ------ 100 100 050 - 0
|
|
196 Reallocated_Event_Count ------ 100 100 050 - 0
|
|
241 Total_LBAs_Written ------ 100 100 050 - 1848485
|
|
242 Total_LBAs_Read ------ 100 100 050 - 407411
|
|
245 Unknown_Attribute ------ 100 100 050 - 2020815
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x31 GPL - 4 Reserved
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
|
|
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
Device Error Count: 1
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 1 [0] log entry is empty
|
|
Warning! SMART Extended Self-test Log Structure error: invalid SMART checksum.
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 27 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 54 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 6071 --- Power-on Hours
|
|
0x01 0x018 6 883268307 --- Logical Sectors Written
|
|
0x01 0x020 6 1482417496 --- Number of Write Commands
|
|
0x01 0x028 6 930300900 --- Logical Sectors Read
|
|
0x01 0x030 6 266613071 --- Number of Read Commands
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 14592 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 40 --- Current Temperature
|
|
0x05 0x010 1 -110 --- Average Short Term Temperature
|
|
0x05 0x018 1 18 --- Average Long Term Temperature
|
|
0x05 0x020 1 40 --- Highest Temperature
|
|
0x05 0x028 1 40 --- Lowest Temperature
|
|
0x05 0x030 1 -1 --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 -1 --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 100 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 462 --- Number of Hardware Resets
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 67 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|