mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
210 lines
10 KiB
Plaintext
210 lines
10 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: Hanstor mSATA 128GB
|
|
Serial Number: --
|
|
LU WWN Device Id: 0 000000 ...
|
|
Firmware Version: FW200723
|
|
User Capacity: 128,035,676,160 bytes [128 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available
|
|
Device is: Not in smartctl database 7.3/5528
|
|
ATA Version is: ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Oct 5 14:24:44 2024 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x5d) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Abort Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 4) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
|
|
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
|
|
9 Power_On_Hours -O--CK 100 100 050 - 3168
|
|
12 Power_Cycle_Count -O--CK 100 100 050 - 15
|
|
160 Unknown_Attribute -O--CK 100 100 050 - 0
|
|
161 Unknown_Attribute -O--CK 100 100 050 - 0
|
|
163 Unknown_Attribute -O--CK 100 100 050 - 32
|
|
164 Unknown_Attribute -O--CK 100 100 050 - 541083
|
|
165 Unknown_Attribute -O--CK 100 100 050 - 142
|
|
166 Unknown_Attribute -O--CK 100 100 050 - 67
|
|
167 Unknown_Attribute -O--CK 100 100 050 - 101
|
|
168 Unknown_Attribute -O--CK 100 100 050 - 0
|
|
169 Unknown_Attribute -O--CK 100 100 050 - 0
|
|
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33554432
|
|
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 157254
|
|
177 Wear_Leveling_Count -O--CK 100 100 050 - 591708
|
|
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
|
|
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
|
|
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 050 - 11
|
|
194 Temperature_Celsius -O--CK 100 100 050 - 54
|
|
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0
|
|
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
|
|
197 Current_Pending_Sector -O--CK 100 100 050 - 0
|
|
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
|
|
232 Available_Reservd_Space -O--CK 100 100 050 - 0
|
|
241 Total_LBAs_Written -O--CK 100 100 050 - 128477
|
|
242 Total_LBAs_Read -O--CK 100 100 050 - 3136
|
|
249 Unknown_Attribute -O--CK 100 100 050 - 130123
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 GPL,SL R/O 1 Summary SMART error log
|
|
0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 GPL,SL R/O 1 SMART self-test log
|
|
0x07 GPL,SL R/O 1 Extended self-test log
|
|
0x09 GPL,SL R/W 1 Selective self-test log
|
|
0x10 GPL,SL R/O 1 NCQ Command Error log
|
|
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa0 GPL,SL VS 16 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 0 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 0 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 15 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 3168 --- Power-on Hours
|
|
0x01 0x018 6 8419868672 --- Logical Sectors Written
|
|
0x01 0x020 6 70000552 --- Number of Write Commands
|
|
0x01 0x028 6 205520896 --- Logical Sectors Read
|
|
0x01 0x030 6 4850226 --- Number of Read Commands
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0009 4 29 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 4 57 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 4 0 CRC errors within host-to-device FIS
|
|
0x000d 4 0 Non-CRC errors within host-to-device FIS
|
|
|