mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
105 lines
5.4 KiB
Plaintext
105 lines
5.4 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Intel X25-E SSDs
|
|
Device Model: SSDSA2SH064G1GC INTEL
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 001517 ...
|
|
Firmware Version: 045C8860
|
|
User Capacity: 64,023,257,088 bytes [64.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
|
|
SATA Version is: SATA 2.6, 3.0 Gb/s
|
|
Local Time is: Sun Dec 6 04:24:59 2020 PST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 32) The self-test routine was interrupted
|
|
by the host with a hard or soft reset.
|
|
Total time to complete Offline
|
|
data collection: ( 1) seconds.
|
|
Offline data collection
|
|
capabilities: (0x75) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Abort Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 4) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 5
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline - 0
|
|
4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline - 0
|
|
5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0
|
|
9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 4309
|
|
12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 1804
|
|
192 Unsafe_Shutdown_Count 0x0002 100 100 000 Old_age Always - 1030
|
|
232 Available_Reservd_Space 0x0003 100 100 010 Pre-fail Always - 0
|
|
233 Media_Wearout_Indicator 0x0002 099 099 000 Old_age Always - 0
|
|
225 Host_Writes_32MiB 0x0000 200 200 000 Old_age Offline - 91067
|
|
226 Intel_Internal 0x0002 255 000 000 Old_age Always - 0
|
|
227 Intel_Internal 0x0002 000 000 000 Old_age Always - 0
|
|
228 Intel_Internal 0x0002 000 000 000 Old_age Always - 0
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 318 -
|
|
# 2 Short offline Completed without error 00% 198 -
|
|
# 3 Short offline Completed without error 00% 181 -
|
|
# 4 Short offline Completed without error 00% 179 -
|
|
# 5 Short offline Completed without error 00% 179 -
|
|
# 6 Short offline Completed without error 00% 179 -
|
|
# 7 Short offline Completed without error 00% 176 -
|
|
# 8 Short offline Completed without error 00% 176 -
|
|
# 9 Short offline Completed without error 00% 175 -
|
|
#10 Short offline Completed without error 00% 172 -
|
|
#11 Short offline Completed without error 00% 169 -
|
|
#12 Short offline Completed without error 00% 146 -
|
|
#13 Short offline Completed without error 00% 123 -
|
|
#14 Short offline Completed without error 00% 104 -
|
|
#15 Short offline Completed without error 00% 102 -
|
|
#16 Short offline Completed without error 00% 102 -
|
|
#17 Short offline Completed without error 00% 91 -
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|