mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
136 lines
6.6 KiB
Plaintext
136 lines
6.6 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.9] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs
|
|
Device Model: INTEL SSDSC2BB080G4
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 5cd2e4 ...
|
|
Firmware Version: D2010355
|
|
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS T13/1699-D revision 4
|
|
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Jul 10 08:35:04 2021 MSK
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x79) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
5 Reallocated_Sector_Ct 0x0032 099 099 000 Old_age Always - 0
|
|
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 28731
|
|
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1809
|
|
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
|
|
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
|
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
|
|
174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 40
|
|
175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 586 (45 54)
|
|
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0
|
|
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
|
|
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|
190 Temperature_Case 0x0022 053 053 000 Old_age Always - 47 (Min/Max 18/47)
|
|
192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 40
|
|
194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 47
|
|
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
|
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
|
|
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 512794
|
|
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 41
|
|
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 9
|
|
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 533
|
|
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
|
|
233 Media_Wearout_Indicator 0x0032 092 092 000 Old_age Always - 0
|
|
234 Thermal_Throttle 0x0032 100 100 000 Old_age Always - 0/0
|
|
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 512794
|
|
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 65187
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 1
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 1 occurred at disk power-on lifetime: 22413 hours (933 days + 21 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
c0 01 80 a0 eb f9 66 Error: WP at LBA = 0x06f9eba0 = 117042080
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
30 00 80 a0 eb f9 66 08 00:08:01.875 WRITE SECTOR(S)
|
|
30 00 80 20 eb f9 66 08 00:08:01.869 WRITE SECTOR(S)
|
|
30 00 80 a0 ea f9 66 08 00:08:01.846 WRITE SECTOR(S)
|
|
30 00 80 20 ea f9 66 08 00:08:01.823 WRITE SECTOR(S)
|
|
30 00 04 fc 85 e1 66 08 00:08:01.799 WRITE SECTOR(S)
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|