80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/Intel/SSDSC2/SSDSC2BB080G4/5BAED69C3CCB
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

363 lines
18 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Intel 730 and DC S35x0/3610/3700 Series SSDs
Device Model: INTEL SSDSC2BB080G4
Serial Number: --
LU WWN Device Id: 5 5cd2e4 ...
Firmware Version: D2010355
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Apr 27 07:06:11 2024 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct -O--CK 033 033 000 - 1399
9 Power_On_Hours -O--CK 100 100 000 - 89360
12 Power_Cycle_Count -O--CK 100 100 000 - 151
170 Available_Reservd_Space PO--CK 047 047 010 - 0
171 Program_Fail_Count -O--CK 099 099 000 - 13
172 Erase_Fail_Count -O--CK 100 100 000 - 0
174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 131
175 Power_Loss_Cap_Test PO--CK 100 100 010 - 625 (499 861)
183 SATA_Downshift_Count -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 090 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 130
190 Temperature_Case -O---K 075 069 000 - 25 (Min/Max 24/27)
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 131
194 Temperature_Internal -O---K 100 100 000 - 25
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
225 Host_Writes_32MiB -O--CK 100 100 000 - 44635474
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 0
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 20
228 Workload_Minutes -O--CK 100 100 000 - 861
232 Available_Reservd_Space PO--CK 047 047 010 - 0
233 Media_Wearout_Indicator -O--CK 001 001 000 - 0
234 Thermal_Throttle -O--CK 100 100 000 - 0/0
241 Host_Writes_32MiB -O--CK 100 100 000 - 44635474
242 Host_Reads_32MiB -O--CK 100 100 000 - 54138
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 8 Comprehensive SMART error log
0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 2 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xb0 GPL,SL VS 1 Device vendor specific log
0xb1 GPL,SL VS 33 Device vendor specific log
0xd1 GPL VS 13056 Device vendor specific log
0xdf GPL VS 1152 Device vendor specific log
0xdf SL VS 128 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (20 sectors)
Device Error Count: 139 (device log contains only the most recent 80 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
Error 139 [58] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.053 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.041 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.031 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.024 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.014 READ DMA
Error 138 [57] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.041 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.031 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.024 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.014 READ DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.013 READ DMA
Error 137 [56] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.031 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.024 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.014 READ DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.013 READ DMA
ca 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.002 WRITE DMA
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
Error 136 [55] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.024 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.014 READ DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.013 READ DMA
ca 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.002 WRITE DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.001 READ DMA
Error 135 [54] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:04.014 READ DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.013 READ DMA
ca 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.002 WRITE DMA
c8 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:04.001 READ DMA
ca 00 00 00 40 00 00 04 d1 a2 a8 64 00 01:30:03.999 WRITE DMA
Error 134 [53] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.067 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.056 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.046 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.039 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.034 READ DMA
Error 133 [52] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.056 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.046 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.039 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.034 READ DMA
c8 00 00 00 08 00 00 04 d8 e7 80 64 00 01:30:03.032 READ DMA
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
Error 132 [51] occurred at disk power-on lifetime: 436 hours (18 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 40 00 00 05 16 73 a8 65 00 Error: UNC 64 sectors at LBA = 0x051673a8 = 85357480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.046 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.039 READ DMA
c8 00 00 00 40 00 00 05 16 73 a8 65 00 01:30:03.034 READ DMA
c8 00 00 00 08 00 00 04 d8 e7 80 64 00 01:30:03.032 READ DMA
c8 00 00 00 08 00 00 04 c8 46 50 64 00 01:30:03.030 READ DMA
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: 24/27 Celsius
Lifetime Min/Max Temperature: 10/47 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 63 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 478 (192)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 151 --- Lifetime Power-On Resets
0x01 0x018 6 2925230444692 --- Logical Sectors Written
0x01 0x020 6 237952 --- Number of Write Commands
0x01 0x028 6 3548028376 --- Logical Sectors Read
0x01 0x030 6 85268 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 130 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 25 --- Current Temperature
0x05 0x010 1 25 --- Average Short Term Temperature
0x05 0x018 1 23 --- Average Long Term Temperature
0x05 0x020 1 46 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x030 1 39 --- Highest Average Short Term Temperature
0x05 0x038 1 19 --- Lowest Average Short Term Temperature
0x05 0x040 1 37 --- Highest Average Long Term Temperature
0x05 0x048 1 22 --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 1286 --- Number of Hardware Resets
0x06 0x010 4 269 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 255 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x000a 4 4 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
View Git Blame Copy Permalink