80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/KingSpec/NT/NT-128/62AC25420CF5
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

337 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-STABLE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: JMicron/Maxiotek based SSDs
Device Model: NT-128
Serial Number: --
LU WWN Device Id: 5 000000 ...
Firmware Version: H180516
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue May 21 23:43:59 2024 +07
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 33) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
9 Power_On_Hours -O--C- 100 100 000 - 15528
12 Power_Cycle_Count -O--C- 100 100 000 - 1632
167 Unknown_JMF_Attribute -O---K 100 100 000 - 0
168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0
169 Unknown_JMF_Attribute PO--C- 096 096 010 - 3932175
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
173 Erase_Count -O--C- 200 200 000 - 461 557 503
175 Bad_Cluster_Table_Count -O---K 100 100 010 - 0
180 Unknown_JMF_Attribute PO--CK 100 100 000 - 1636
187 Unknown_JMF_Attribute -O--CK 100 000 000 - 0
192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 87
206 Unknown_SSD_Attribute -O--CK 200 200 000 - 461
207 Unknown_SSD_Attribute -O--CK 200 200 000 - 557
208 Unknown_SSD_Attribute -O--CK 200 200 000 - 503
209 Unknown_SSD_Attribute -O--CK 200 200 000 - 528
210 Unknown_Attribute -O--CK 200 200 000 - 30245
211 Unknown_Attribute -O--CK 200 200 000 - 20498
231 Unknown_JMF_Attribute PO---K 067 067 005 - 33
241 Total_LBAs_Written -O--CK 100 100 000 - 51763937634
242 Total_LBAs_Read -O--CK 100 100 000 - 1874474542
245 Unknown_Attribute -O--CK 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 127
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 [126] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 07 8a f6 e1 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 80 00:02:03.500 IDENTIFY DEVICE
b0 00 da 00 00 00 00 00 c2 4f 00 00 80 00:02:03.500 SMART RETURN STATUS
2f 00 00 00 01 00 00 00 00 00 e0 00 80 00:02:03.500 READ LOG EXT
b0 00 da 00 00 00 00 00 c2 4f 00 00 80 00:02:03.500 SMART RETURN STATUS
2f 00 00 00 01 00 00 00 00 00 e0 00 80 00:02:03.500 READ LOG EXT
Error 126 [125] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 03 00 37 3c 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:59.200 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:59.200 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:58.500 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:58.500 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:57.400 FLUSH CACHE EXT
Error 125 [124] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 01 69 9d dd 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:57.400 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:56.400 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:56.400 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:56.300 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:56.100 FLUSH CACHE EXT
Error 124 [123] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 09 28 5f 86 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:54.500 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:54.200 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:54.200 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:51.700 FLUSH CACHE EXT
b0 00 d5 00 01 00 00 00 c2 4f 01 00 80 00:01:51.100 SMART READ LOG
Error 123 [122] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 05 a1 de 1c 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:40.500 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:40.500 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:40.500 READ LOG EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:40.500 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:40.000 FLUSH CACHE EXT
Error 122 [121] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 0e c9 fe 20 40 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:40.500 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:40.000 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:39.900 READ LOG EXT
Error 121 [120] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 0e c9 fe 20 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:40.000 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:39.900 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
Error 120 [119] occurred at disk power-on lifetime: 10463 hours (435 days + 23 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 41 00 00 00 00 0e cc d3 d0 40 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:39.900 READ LOG EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:39.900 READ LOG EXT
ea 00 00 00 00 00 00 00 00 00 00 00 80 00:01:39.900 FLUSH CACHE EXT
2f 00 00 00 01 00 00 00 00 00 10 00 80 00:01:39.900 READ LOG EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: ?/30 Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (0)
SCT Error Recovery Control:
Read: 80 (8.0 seconds)
Write: 80 (8.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 1632 --- Lifetime Power-On Resets
0x01 0x010 4 15528 --- Power-on Hours
0x01 0x018 6 51763937634 --- Logical Sectors Written
0x01 0x020 6 1766234578 --- Number of Write Commands
0x01 0x028 6 1874474542 --- Logical Sectors Read
0x01 0x030 6 65102832 --- Number of Read Commands
0x01 0x038 6 14310898765424 --- Date and Time TimeStamp
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 79 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink