1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
2025-01-05 02:37:11 +03:00

102 lines
4.2 KiB
Plaintext

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE-p2 arm64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LEXAR CFAST 64GB CARD
Serial Number: --
LU WWN Device Id: 0 000000 ...
Firmware Version: 20141204
User Capacity: 64,023,257,088 bytes [64.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 1.8 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jan 8 17:06:16 2024
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate ------ 100 100 050 - 0
5 Reallocated_Sector_Ct -O---- 100 100 050 - 2
9 Power_On_Hours ------ 100 100 050 - 1686
12 Power_Cycle_Count ------ 100 100 050 - 211
160 Unknown_Attribute ------ 100 100 050 - 4
161 Unknown_Attribute ------ 100 100 050 - 58
162 Unknown_Attribute ------ 100 100 050 - 5
163 Unknown_Attribute ------ 100 100 050 - 25
164 Unknown_Attribute ------ 100 100 050 - 808450
165 Unknown_Attribute ------ 100 100 050 - 1349
166 Unknown_Attribute ------ 100 100 050 - 353
167 Unknown_Attribute ------ 100 100 050 - 791
192 Power-Off_Retract_Count ------ 100 100 050 - 0
194 Temperature_Celsius ------ 100 100 050 - 26
195 Hardware_ECC_Recovered ------ 100 100 050 - 3
196 Reallocated_Event_Count ------ 100 100 050 - 0
199 UDMA_CRC_Error_Count ------ 100 100 050 - 109
241 Total_LBAs_Written ------ 100 100 050 - 342182
242 Total_LBAs_Read ------ 100 100 050 - 106502
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: scsi error aborted command
General Purpose Log Directory Version 1
Address Access R/W Size Description
0x00 GPL R/O 1 Log Directory
0x30 GPL R/O 1 IDENTIFY DEVICE data log
0x80-0x9f GPL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported