mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
266 lines
12 KiB
Plaintext
266 lines
12 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: LITEONIT LCS-256M6S 2.5 7mm 256GB
|
|
Serial Number: --
|
|
Firmware Version: DC8110E
|
|
User Capacity: 256,060,514,304 bytes [256 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
TRIM Command: Available
|
|
Device is: Not in smartctl database 7.3/5319
|
|
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Thu May 11 22:21:33 2023 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Disabled
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 10) seconds.
|
|
Offline data collection
|
|
capabilities: (0x15) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Abort Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x00) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 10) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
|
|
12 Power_Cycle_Count PO---- 100 100 000 - 2073
|
|
175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
|
|
176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
|
|
177 Wear_Leveling_Count PO---- 100 100 000 - 208565
|
|
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
|
|
179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
|
|
180 Unused_Rsvd_Blk_Cnt_Tot PO---- 100 100 005 - 480
|
|
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
|
|
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
|
|
187 Reported_Uncorrect PO---- 100 100 000 - 0
|
|
195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
|
|
241 Total_LBAs_Written PO---- 100 100 000 - 617196
|
|
242 Total_LBAs_Read PO---- 100 100 000 - 870956
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 0
|
|
SMART Log Directory Version 0
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 GPL,SL R/O 1 Summary SMART error log
|
|
0x06 GPL,SL R/O 1 SMART self-test log
|
|
0x07 GPL,SL R/O 1 Extended self-test log
|
|
0x10 GPL,SL R/O 1 NCQ Command Error log
|
|
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 1 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
Warning: ATA error count 0 inconsistent with error log pointer 3
|
|
|
|
ATA Error Count: 0
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
31 00 bd 36 00 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
f1 31 d2 26 00 00 00 a0 00:00:00.001 SECURITY SET PASSWORD
|
|
f1 31 64 b2 00 00 00 a0 00:00:00.001 SECURITY SET PASSWORD
|
|
f1 31 2e 0d 00 00 00 a0 00:00:00.001 SECURITY SET PASSWORD
|
|
f1 31 4b 2e 0d 00 00 a0 00:00:00.001 SECURITY SET PASSWORD
|
|
f1 03 00 00 00 00 00 00 00:00:00.001 SECURITY SET PASSWORD
|
|
|
|
Error -1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
0e 00 00 00 00 00 01
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
00 15 00 00 00 f1 01 83 9d+15:16:09.344 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 14 00 00 00 f1 01 b8 9d+15:16:09.344 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 29 00 00 00 f1 01 66 9d+15:16:09.344 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 8e 00 00 00 f1 01 fb 9d+15:16:09.344 NOP [Reserved subcommand] [OBS-ACS-2]
|
|
00 00 00 00 00 f1 01 00 9d+15:16:09.344 NOP [Abort queued commands]
|
|
|
|
Error -2 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
00 00 00 00 01 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
00 00 00 f1 01 00 00 00 16d+02:58:31.456 NOP [Abort queued commands]
|
|
00 00 00 f1 01 00 00 00 5d+10:41:35.648 NOP [Abort queued commands]
|
|
00 00 00 f1 01 00 00 00 4d+10:37:37.056 NOP [Abort queued commands]
|
|
00 00 00 f1 01 00 00 00 14d+18:26:38.624 NOP [Abort queued commands]
|
|
00 00 00 f1 01 00 00 00 11d+12:18:38.112 NOP [Abort queued commands]
|
|
|
|
Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
00 00 00 00 00 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
00 00 00 00 00 03 00 00 00:00:00.000 NOP [Abort queued commands]
|
|
|
|
Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was in an unknown state.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
00 00 00 00 00 00 00
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
00 00 a0 31 c0 4a 00 00 00:00:00.000 NOP [Abort queued commands]
|
|
00 00 a0 31 77 4a 00 00 00:02:07.232 NOP [Abort queued commands]
|
|
00 00 a0 31 32 39 00 00 00:02:07.232 NOP [Abort queued commands]
|
|
00 00 00 03 00 00 00 00 00:02:07.232 NOP [Abort queued commands]
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 57142 -
|
|
# 2 Short offline Completed without error 00% 22838 -
|
|
# 3 Short offline Completed without error 00% 14646 -
|
|
# 4 Short offline Completed without error 00% 11574 -
|
|
# 5 Short offline Completed without error 00% 6198 -
|
|
# 6 Short offline Completed without error 00% 65077 -
|
|
# 7 Short offline Completed without error 00% 59701 -
|
|
# 8 Short offline Completed without error 00% 55861 -
|
|
# 9 Short offline Completed without error 00% 49717 -
|
|
#10 Short offline Completed without error 00% 35125 -
|
|
#11 Short offline Completed without error 00% 31541 -
|
|
#12 Short offline Completed without error 00% 27957 -
|
|
#13 Short offline Completed without error 00% 21813 -
|
|
#14 Short offline Completed without error 00% 18485 -
|
|
#15 Short offline Completed without error 00% 17205 -
|
|
#16 Short offline Completed without error 00% 16693 -
|
|
#17 Short offline Completed without error 00% 16437 -
|
|
#18 Short offline Completed without error 00% 15669 -
|
|
#19 Short offline Completed without error 00% 31542 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: Active (0)
|
|
Current Temperature: ? Celsius
|
|
Power Cycle Min/Max Temperature: ?/ ? Celsius
|
|
Lifetime Min/Max Temperature: ?/ ? Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 0 minutes
|
|
Temperature Logging Interval: 0 minutes
|
|
Min/Max recommended Temperature: ?/ ? Celsius
|
|
Min/Max Temperature Limit: ?/ ? Celsius
|
|
Temperature History Size (Index): 128 (0)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 2 (0.2 seconds)
|
|
Write: 2 (0.2 seconds)
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|