80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/MACROVIP/MV/MV240GB/4D5DB4E23AC8
Andrey Ponomarenko 2a811b67c1 Update of reports (new: 6895, modified: 16)
2025-01-05 01:57:11 +03:00

241 lines
12 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MACROVIP MV240GB
Serial Number: --
LU WWN Device Id: 0 000000 ...
Firmware Version: HPS2227N
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Dec 14 09:34:39 2023 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5d) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 4) minutes.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0
5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 050 - 6874
12 Power_Cycle_Count -O--CK 100 100 050 - 98
160 Unknown_Attribute -O--CK 100 100 050 - 0
161 Unknown_Attribute -O--CK 100 100 050 - 100
163 Unknown_Attribute -O--CK 100 100 050 - 174
164 Unknown_Attribute -O--CK 100 100 050 - 379
165 Unknown_Attribute -O--CK 100 100 050 - 432
166 Unknown_Attribute -O--CK 100 100 050 - 350
167 Unknown_Attribute -O--CK 100 100 050 - 396
168 Unknown_Attribute -O--CK 100 100 050 - 0
169 Unknown_Attribute -O--CK 100 100 050 - 100
175 Program_Fail_Count_Chip -O--CK 100 100 050 - 33554432
176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 1429004
177 Wear_Leveling_Count -O--CK 100 100 050 - 46281135
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 050 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0
192 Power-Off_Retract_Count -O--CK 100 100 050 - 53
194 Temperature_Celsius -O--CK 100 100 050 - 30
195 Hardware_ECC_Recovered -O--CK 100 100 050 - 19240
196 Reallocated_Event_Count -O--CK 100 100 050 - 0
197 Current_Pending_Sector -O--CK 100 100 050 - 0
198 Offline_Uncorrectable -O--CK 100 100 050 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0
232 Available_Reservd_Space -O--CK 100 100 050 - 100
241 Total_LBAs_Written -O--CK 100 100 050 - 201830
242 Total_LBAs_Read -O--CK 100 100 050 - 936
245 Unknown_Attribute -O--CK 100 100 050 - 3565678
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0 GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 397 hours (16 days + 13 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- e0 00 20 00 01 df 00 a4 0c 51 00 Device Fault at LBA = 0x1df00a40c = 8036328460
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
29 20 20 00 20 00 01 df 00 a4 0c e0 08 00:00:34.280 READ MULTIPLE EXT
29 20 20 00 20 00 01 de 00 a4 ec e0 08 00:00:34.270 READ MULTIPLE EXT
29 20 20 00 20 00 01 de 00 a4 cc e0 08 00:00:34.270 READ MULTIPLE EXT
29 20 20 00 20 00 01 de 00 a4 ac e0 08 00:00:34.260 READ MULTIPLE EXT
29 20 20 00 1a 00 01 de 00 a4 92 e0 08 00:00:34.250 READ MULTIPLE EXT
SMART Extended Self-test Log Version: 0 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 98 --- Lifetime Power-On Resets
0x01 0x010 4 6874 --- Power-on Hours
0x01 0x018 6 13227130880 --- Logical Sectors Written
0x01 0x020 6 375524369 --- Number of Write Commands
0x01 0x028 6 61341696 --- Logical Sectors Read
0x01 0x030 6 1933110 --- Number of Read Commands
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0009 4 136 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 48 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
View Git Blame Copy Permalink