80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/MyDigitalSSD/SB/SB2/11D63A03BFFF
Andrey Ponomarenko 57268effe6 Update of reports (new: 0, modified: 299)
2023-02-18 20:17:54 +03:00

306 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SB2
Serial Number: --
LU WWN Device Id: 0 000000 ...
Firmware Version: SBFM61.2
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-4 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed May 18 23:37:41 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 16) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 25
9 Power_On_Hours -O--C- 100 100 000 - 28091
12 Power_Cycle_Count -O--C- 100 100 000 - 203
168 Unknown_Attribute -O--C- 100 100 000 - 0
170 Unknown_Attribute PO---- 082 082 010 - 8589934707
173 Unknown_Attribute -O--C- 100 100 000 - 7798930
192 Power-Off_Retract_Count -O--C- 100 100 000 - 143
194 Temperature_Celsius PO---K 067 067 000 - 33 (Min/Max 33/33)
218 Unknown_Attribute PO-R-- 100 100 050 - 0
231 Unknown_SSD_Attribute PO--C- 100 100 000 - 96
241 Total_LBAs_Written -O--C- 100 100 000 - 16906
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 25
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 25 [24] occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 79 b0 40 02 Error: UNC 240 sectors at LBA = 0x000279b0 = 162224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 79 b0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 0a 19 d6 30 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 9d 58 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 9c 68 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 87 98 40 02 00:00:00.000 READ DMA EXT
Error 24 [23] occurred at disk power-on lifetime: 4 hours (0 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 6a a8 40 02 Error: UNC 240 sectors at LBA = 0x00026aa8 = 158376
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 6a a8 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 89 28 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 88 38 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 84 d0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 83 e0 40 02 00:00:00.000 READ DMA EXT
Error 23 [22] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 18 00 00 00 02 69 88 40 02 Error: UNC 24 sectors at LBA = 0x00026988 = 158088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 18 00 00 00 02 69 88 40 02 00:00:00.000 READ DMA EXT
35 00 00 00 f0 00 00 00 0b 20 00 40 02 00:00:00.000 WRITE DMA EXT
25 00 00 00 10 00 00 09 f7 fb c0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 0b 01 0c 08 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 20 00 00 0e 84 29 18 40 02 00:00:00.000 READ DMA EXT
Error 22 [21] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 10 00 00 00 02 81 18 40 02 Error: UNC 16 sectors at LBA = 0x00028118 = 164120
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 10 00 00 00 02 81 18 40 02 00:00:00.000 READ DMA EXT
ef 00 02 00 00 00 00 00 00 00 00 00 02 00:00:00.000 SET FEATURES [Enable write cache]
ef 00 03 00 46 00 00 00 00 00 00 00 02 00:00:00.000 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 02 00:00:00.000 IDENTIFY DEVICE
ff 00 d5 00 01 00 00 00 00 00 01 00 04 00:00:00.000 [VENDOR SPECIFIC]
Error 21 [20] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 80 28 40 02 Error: UNC 240 sectors at LBA = 0x00028028 = 163880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 80 28 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 8a 50 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 89 60 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 00 02 7a 30 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 7a a0 40 02 00:00:00.000 READ DMA EXT
Error 20 [19] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 79 b0 40 02 Error: UNC 240 sectors at LBA = 0x000279b0 = 162224
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 79 b0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 80 00 00 0a 19 d6 30 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 9d 58 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 9c 68 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 87 98 40 02 00:00:00.000 READ DMA EXT
Error 19 [18] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 6a a8 40 02 Error: UNC 240 sectors at LBA = 0x00026aa8 = 158376
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 6a a8 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 89 28 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 88 38 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 10 00 00 00 02 84 d0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 f0 00 00 00 02 83 e0 40 02 00:00:00.000 READ DMA EXT
Error 18 [17] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 00 02 69 88 40 02 Error: UNC 240 sectors at LBA = 0x00026988 = 158088
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 f0 00 00 00 02 69 88 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 09 88 07 88 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 18 00 00 0a c4 2f a0 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 08 00 00 09 e1 bb 48 40 02 00:00:00.000 READ DMA EXT
25 00 00 00 78 00 00 09 e1 2a 10 40 02 00:00:00.000 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Aborted by host 00% 27349 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 203 --- Lifetime Power-On Resets
0x01 0x010 4 28091 --- Power-on Hours
0x01 0x018 6 35456111069 --- Logical Sectors Written
0x01 0x028 6 16468689051 --- Logical Sectors Read
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 25 --- Number of Reported Uncorrectable Errors
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 33 --- Current Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 33 --- Lowest Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink