mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
102 lines
5.1 KiB
Plaintext
102 lines
5.1 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [OpenBSD 7.1 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SandForce Driven SSDs
|
|
Device Model: OWC Mercury Electra 6G SSD
|
|
Serial Number: --
|
|
LU WWN Device Id: 0 013091 ...
|
|
Firmware Version: 522ABBF0
|
|
User Capacity: 240,057,409,536 bytes [240 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
TRIM Command: Available, deterministic
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
|
|
Local Time is: Sun May 29 17:06:30 2022 BST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x05) Offline data collection activity
|
|
was aborted by an interrupting command from host.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 25) The self-test routine was aborted by
|
|
the host.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x79) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 48) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x0025) SCT Status supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 0/6216712
|
|
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
|
|
9 Power_On_Hours_and_Msec 0x0032 091 091 000 Old_age Always - 8059h+09m+19.060s
|
|
12 Power_Cycle_Count 0x0032 088 088 000 Old_age Always - 12994
|
|
171 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
|
|
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
|
|
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 636
|
|
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 5
|
|
181 Program_Fail_Count 0x000a 000 000 000 Old_age Always - 0
|
|
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
|
|
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0
|
|
190 Airflow_Temperature_Cel 0x0000 034 056 000 Old_age Offline - 34 (Min/Max 11/56)
|
|
194 Temperature_Celsius 0x0022 034 056 000 Old_age Always - 34 (Min/Max 11/56)
|
|
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/6216712
|
|
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
|
|
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/6216712
|
|
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/6216712
|
|
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
|
|
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
|
|
233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 27458
|
|
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 28625
|
|
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 28625
|
|
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 12536
|
|
|
|
SMART Error Log not supported
|
|
|
|
SMART Self-test Log not supported
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
|
|
|