1
0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Files
SMART-open-study/SSD/SHAREVDI/128/128GB SSD/42CB14A16596
2025-01-05 03:17:30 +03:00

137 lines
5.9 KiB
Plaintext

smartctl 7.4 2023-08-01 r5530 [FreeBSD 13.2-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SHAREVDI 128GB SSD
Serial Number: --
LU WWN Device Id: 5 02b2a2 ...
Add. Product Id: mavlsata
Firmware Version: V4.30.3
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Feb 8 09:25:45 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x75) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 90) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours PO--CK 100 100 010 - 9584
12 Power_Cycle_Count PO--CK 100 100 010 - 138
161 Unknown_Attribute PO--CK 100 100 010 - 0
164 Unknown_Attribute PO--CK 100 100 010 - 128237
165 Unknown_Attribute PO--CK 100 100 010 - 296
166 Unknown_Attribute PO--CK 100 100 010 - 223
167 Unknown_Attribute PO--CK 100 100 010 - 273
169 Unknown_Attribute PO--CK 100 100 010 - 0
176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0
177 Wear_Leveling_Count PO--CK 100 100 010 - 0
178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0
192 Power-Off_Retract_Count PO--CK 100 100 010 - 0
194 Temperature_Celsius PO--CK 100 100 010 - 48
195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0
199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0
241 Total_LBAs_Written PO--CK 100 100 010 - 16929
242 Total_LBAs_Read PO--CK 100 100 010 - 488
243 Unknown_Attribute PO--CK 100 100 010 - 0
244 Unknown_Attribute PO--CK 100 100 010 - 0
245 Unknown_Attribute PO--CK 100 100 010 - 0
246 Unknown_Attribute PO--CK 100 100 010 - 0
248 Unknown_Attribute PO--CK 100 100 010 - 0
249 Unknown_Attribute PO--CK 100 100 010 - 0
250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0
251 Unknown_Attribute PO--CK 100 100 010 - 0
252 Unknown_Attribute PO--CK 100 100 010 - 0
253 Unknown_Attribute PO--CK 100 100 010 - 0
254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported