80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/SK hynix/HFS256/HFS256G39TND-N210A/703FD70CE437
Andrey Ponomarenko 8c515ea896 Update of reports (new: 35, modified: 3308)
2025-01-05 02:37:11 +03:00

304 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-STABLE amd64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SK hynix SATA SSDs
Device Model: HFS256G39TND-N210A
Serial Number: --
Firmware Version: 30001P10
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: M.2
TRIM Command: Available, deterministic
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jul 25 00:20:18 2024 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x03) Offline data collection activity
is in progress.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 105) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 20) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
5 Retired_Block_Count -O--CK 253 100 036 - 0
9 Power_On_Hours -O--CK 088 088 000 - 10801
12 Power_Cycle_Count -O--CK 095 095 020 - 55382
100 Total_Erase_Count -O--CK 100 100 000 - 37980511
168 Min_Erase_Count -O--CK 049 049 000 - 544
169 Max_Erase_Count -O--CK 039 039 000 - 653
171 Program_Fail_Count -O--CK 253 253 000 - 0
172 Erase_Fail_Count -O--CK 253 253 000 - 0
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 1095
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
177 Wear_Leveling_Count -O--CK 045 045 000 - 587
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 55
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 388
180 Erase_Fail_Count -O--CK 100 100 000 - 5052
184 End-to-End_Error -O--CK 100 100 000 - 72
187 Reported_Uncorrect -O--CK 100 100 000 - 1
188 Command_Timeout -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 034 000 000 - 34 (Min/Max 5/74)
195 Hardware_ECC_Recovered -O--CK 001 001 000 - 4294967295
196 Reallocated_Event_Count -O--CK 253 100 036 - 0
198 Offline_Uncorrectable -O--CK 100 100 000 - 552
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
204 Soft_ECC_Correction -OSR-- 098 001 000 - 146
212 Phy_Error_Count -O--CK 100 100 000 - 7
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 159231
241 Total_Writes_GB -O--CK 100 100 000 - 29845
242 Total_Reads_GB -O--CK 100 100 000 - 38034
250 Read_Retry_Count -O--CK 100 100 000 - 36633502
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL R/O 8 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 11
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 [10] occurred at disk power-on lifetime: 10711 hours (446 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:26:59.180 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:26:59.180 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:26:59.170 IDENTIFY DEVICE
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:26:28.990 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:26:28.990 READ FPDMA QUEUED
Error 10 [9] occurred at disk power-on lifetime: 10711 hours (446 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:26:28.990 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:26:28.990 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:26:28.980 IDENTIFY DEVICE
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:25:58.790 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:25:58.780 READ FPDMA QUEUED
Error 9 [8] occurred at disk power-on lifetime: 10711 hours (446 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:25:58.790 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:25:58.780 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:25:58.770 IDENTIFY DEVICE
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:25:28.600 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:25:28.600 READ FPDMA QUEUED
Error 8 [7] occurred at disk power-on lifetime: 10711 hours (446 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 08 00 00 01 3b b9 10 40 40 01:25:28.600 READ FPDMA QUEUED
60 01 00 00 00 00 00 01 3b b8 10 40 40 01:25:28.600 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:25:28.580 IDENTIFY DEVICE
60 01 00 00 80 00 00 01 3b b8 10 40 40 01:24:58.220 READ FPDMA QUEUED
60 01 00 00 78 00 00 01 3b b7 10 40 40 01:24:58.180 READ FPDMA QUEUED
Error 7 [6] occurred at disk power-on lifetime: 10711 hours (446 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 01 00 00 80 00 00 01 3b b8 10 40 40 01:24:58.220 READ FPDMA QUEUED
60 01 00 00 78 00 00 01 3b b7 10 40 40 01:24:58.180 READ FPDMA QUEUED
60 01 00 00 70 00 00 01 3b b6 10 40 40 01:24:58.150 READ FPDMA QUEUED
60 00 50 00 68 00 00 01 3b b5 c0 40 40 01:24:58.110 READ FPDMA QUEUED
60 00 b0 00 60 00 00 01 39 c7 a0 40 40 01:24:58.110 READ FPDMA QUEUED
Error 6 [5] occurred at disk power-on lifetime: 10708 hours (446 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 01 3b b8 d8 00 00 Error: UNC at LBA = 0x013bb8d8 = 20691160
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:42:45.080 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:42:45.070 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:42:14.890 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:42:14.880 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:41:44.710 READ DMA EXT
Error 5 [4] occurred at disk power-on lifetime: 10708 hours (446 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 01 3b b8 d8 00 00 Error: UNC at LBA = 0x013bb8d8 = 20691160
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:42:14.890 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:42:14.880 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:41:44.710 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:41:44.700 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:41:14.530 READ DMA EXT
Error 4 [3] occurred at disk power-on lifetime: 10708 hours (446 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 01 3b b8 d8 00 00 Error: UNC at LBA = 0x013bb8d8 = 20691160
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:41:44.710 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:41:44.700 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:41:14.530 READ DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 00 00 01:41:14.520 IDENTIFY DEVICE
25 00 00 01 00 00 00 01 3b b8 08 40 40 01:40:44.110 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7661 -
# 2 Short offline Completed without error 00% 7640 -
# 3 Short offline Completed without error 90% 6423 -
# 4 Short offline Completed without error 90% 6400 -
# 5 Short offline Completed without error 00% 6377 -
# 6 Short offline Completed without error 00% 6354 -
# 7 Short offline Completed without error 00% 6335 -
# 8 Short offline Completed without error 00% 6312 -
# 9 Short offline Completed without error 00% 6288 -
#10 Short offline Completed without error 00% 6269 -
#11 Short offline Completed without error 00% 6257 -
#12 Short offline Completed without error 00% 6257 -
#13 Short offline Completed without error 00% 61 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 14 Device-to-host register FISes sent due to a COMRESET
View Git Blame Copy Permalink