mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
206 lines
9.9 KiB
Plaintext
206 lines
9.9 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SK hynix SATA SSDs
|
|
Device Model: HFS256G39TND-N210A
|
|
Serial Number: --
|
|
Firmware Version: 30200P10
|
|
User Capacity: 256,060,514,304 bytes [256 GB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: M.2
|
|
TRIM Command: Available, deterministic
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ACS-2 (minor revision not indicated)
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Thu May 23 14:23:47 2024 EEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 32) The self-test routine was interrupted
|
|
by the host with a hard or soft reset.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x19) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 20) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 0
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
|
5 Retired_Block_Count -O--CK 100 100 036 - 2
|
|
9 Power_On_Hours -O--CK 093 093 000 - 6989
|
|
12 Power_Cycle_Count -O--CK 100 100 020 - 669
|
|
100 Total_Erase_Count -O--CK 100 100 000 - 17503720
|
|
168 Min_Erase_Count -O--CK 073 073 000 - 289
|
|
169 Max_Erase_Count -O--CK 071 071 000 - 308
|
|
171 Program_Fail_Count -O--CK 253 253 000 - 0
|
|
172 Erase_Fail_Count -O--CK 253 253 000 - 0
|
|
174 Unexpect_Power_Loss_Ct ----CK 100 100 000 - 71
|
|
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
|
176 Unused_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
|
177 Wear_Leveling_Count -O--CK 075 001 000 - 267
|
|
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 86
|
|
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 795
|
|
180 Erase_Fail_Count -O--CK 100 100 000 - 4645
|
|
184 End-to-End_Error -O--CK 100 100 000 - 122
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 152
|
|
188 Command_Timeout -O--CK 253 253 000 - 0
|
|
194 Temperature_Celsius -O---- 035 022 000 - 35 (Min/Max 0/49)
|
|
195 Hardware_ECC_Recovered -O--CK 098 020 000 - 93981573
|
|
196 Reallocated_Event_Count -O--CK 100 100 036 - 2
|
|
198 Offline_Uncorrectable -O--CK 100 100 000 - 16
|
|
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
|
204 Soft_ECC_Correction -OSR-- 100 001 000 - 7
|
|
212 Phy_Error_Count -O--CK 253 253 000 - 0
|
|
234 Unknown_SK_hynix_Attrib -O--CK 100 100 000 - 73931
|
|
241 Total_Writes_GB -O--CK 100 100 000 - 7324
|
|
242 Total_Reads_GB -O--CK 100 100 000 - 7314
|
|
250 Read_Retry_Count -O--CK 098 098 000 - 111787748
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 4 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 2 Extended self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
Device Error Count: 3
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 3 [2] occurred at disk power-on lifetime: 6475 hours (269 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 08 00 d8 00 00 00 67 e5 88 40 40 00:02:41.630 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 e0 e0 00:02:41.620 READ LOG EXT
|
|
60 00 08 00 d0 00 00 00 67 e5 88 40 40 00:02:41.590 READ FPDMA QUEUED
|
|
60 00 08 00 c8 00 00 00 67 e5 80 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
60 00 08 00 c0 00 00 00 67 e5 78 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
|
|
Error 2 [1] occurred at disk power-on lifetime: 6475 hours (269 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 00 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 08 00 d0 00 00 00 67 e5 88 40 40 00:02:41.590 READ FPDMA QUEUED
|
|
60 00 08 00 c8 00 00 00 67 e5 80 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
60 00 08 00 c0 00 00 00 67 e5 78 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
60 00 08 00 b8 00 00 00 67 e5 70 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
60 00 08 00 b0 00 00 00 67 e5 68 40 40 00:02:41.580 READ FPDMA QUEUED
|
|
|
|
Error 1 [0] occurred at disk power-on lifetime: 6474 hours (269 days + 18 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 51 00 00 00 00 01 66 90 80 00 00 Error: UNC at LBA = 0x01669080 = 23498880
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
25 00 00 08 00 00 00 01 66 90 00 40 40 00:00:36.880 READ DMA EXT
|
|
25 00 00 08 00 00 00 01 66 90 38 40 40 00:00:36.570 READ DMA EXT
|
|
25 00 00 08 00 00 00 04 56 d8 c0 40 40 00:00:36.240 READ DMA EXT
|
|
25 00 00 08 00 00 00 03 85 49 c0 40 40 00:00:35.350 READ DMA EXT
|
|
25 00 00 08 00 00 00 04 51 e4 c0 40 40 00:00:34.780 READ DMA EXT
|
|
|
|
SMART Extended Self-test Log Version: 1 (2 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (empty) ==
|
|
0x04 ===== = = === == General Errors Statistics (empty) ==
|
|
0x05 ===== = = === == Temperature Statistics (empty) ==
|
|
0x06 ===== = = === == Transport Statistics (empty) ==
|
|
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
|
|