mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
205 lines
10 KiB
Plaintext
205 lines
10 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-STABLE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: HFS256G39TNF-N3A0A
|
|
Serial Number: --
|
|
Firmware Version: 70000P10
|
|
User Capacity: 256,060,514,304 bytes [256 GB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: M.2
|
|
TRIM Command: Available, deterministic, zeroed
|
|
Device is: Not in smartctl database 7.3/5528
|
|
ATA Version is: ACS-3 (minor revision not indicated)
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Dec 28 19:05:18 2024 CET
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Unknown
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x05) Offline data collection activity
|
|
was aborted by an interrupting command from host.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 39) The self-test routine was interrupted
|
|
by the host with a hard or soft reset.
|
|
Total time to complete Offline
|
|
data collection: ( 667) seconds.
|
|
Offline data collection
|
|
capabilities: (0x51) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 40) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 0
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
|
|
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
|
|
9 Power_On_Hours -O--CK 088 088 000 - 11275
|
|
12 Power_Cycle_Count -O--CK 100 100 020 - 2644
|
|
100 Unknown_Attribute -O--CK 100 100 000 - 907311
|
|
168 Unknown_Attribute -O--CK 100 100 000 - 9
|
|
169 Unknown_Attribute -O--CK 097 097 000 - 65
|
|
171 Unknown_Attribute -O--CK 253 253 000 - 0
|
|
172 Unknown_Attribute -O--CK 253 253 000 - 0
|
|
174 Unknown_Attribute ----CK 100 100 000 - 322
|
|
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
|
|
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
|
|
177 Wear_Leveling_Count -O--CK 099 001 000 - 32
|
|
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 253 253 000 - 0
|
|
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 253 253 000 - 0
|
|
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 777
|
|
184 End-to-End_Error -O--CK 253 253 000 - 0
|
|
187 Reported_Uncorrect -O--CK 253 253 000 - 0
|
|
188 Command_Timeout -O--CK 253 253 000 - 0
|
|
194 Temperature_Celsius -O---- 035 014 000 - 35 (Min/Max 14/56)
|
|
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
|
|
196 Reallocated_Event_Count -O--CK 253 253 036 - 0
|
|
198 Offline_Uncorrectable -O--CK 253 253 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 253 253 000 - 0
|
|
204 Soft_ECC_Correction -OSR-- 100 001 000 - 17
|
|
212 Unknown_Attribute -O--CK 100 100 000 - 7259
|
|
233 Media_Wearout_Indicator -O--CK 003 001 000 - 98
|
|
234 Unknown_Attribute -O--CK 100 100 000 - 8315
|
|
241 Total_LBAs_Written -O--CK 100 100 000 - 10394
|
|
242 Total_LBAs_Read -O--CK 100 100 000 - 6923
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 4 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 2 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL R/O 8 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (2 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Extended offline Interrupted (host reset) 70% 9287 -
|
|
# 2 Short offline Aborted by host 70% 9287 -
|
|
# 3 Short offline Completed without error 00% 9287 -
|
|
# 4 Short offline Completed without error 00% 2 -
|
|
|
|
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 1 (0x0001)
|
|
Device State: Active (0)
|
|
Current Temperature: 35 Celsius
|
|
Power Cycle Min/Max Temperature: 21/36 Celsius
|
|
Lifetime Min/Max Temperature: 14/56 Celsius
|
|
Specified Max Operating Temperature: 80 Celsius
|
|
Under/Over Temperature Limit Count: 40/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 1 minute
|
|
Min/Max recommended Temperature: -20/80 Celsius
|
|
Min/Max Temperature Limit: -20/125 Celsius
|
|
Temperature History Size (Index): 192 (96)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: 80 (8.0 seconds)
|
|
Write: 80 (8.0 seconds)
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 2) ==
|
|
0x01 0x008 4 2644 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 11275 --- Power-on Hours
|
|
0x01 0x018 6 20302478424 --- Logical Sectors Written
|
|
0x01 0x020 6 245788411 --- Number of Write Commands
|
|
0x01 0x028 6 13522881709 --- Logical Sectors Read
|
|
0x01 0x030 6 223761807 --- Number of Read Commands
|
|
0x01 0x038 6 1734835635776 --- Date and Time TimeStamp
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 35 --- Current Temperature
|
|
0x05 0x010 1 35 --- Average Short Term Temperature
|
|
0x05 0x018 1 - --- Average Long Term Temperature
|
|
0x05 0x020 1 56 --- Highest Temperature
|
|
0x05 0x028 1 14 --- Lowest Temperature
|
|
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 25 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 30 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 80 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 655260 --- Time in Under-Temperature
|
|
0x05 0x068 1 -20 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 13455 --- Number of Hardware Resets
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
|
|
|