80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/SSD/SK hynix/HFS256/HFS256G3AMNB-2200A/BFD88F253017
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

285 lines
14 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p18-HBSD amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HFS256G3AMNB-2200A
Serial Number: --
Firmware Version: 10105L00
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 5 18:00:16 2021 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 082 082 000 - 16724
12 Power_Cycle_Count -O--CK 100 100 020 - 132
100 Unknown_Attribute -O--CK 100 100 000 - 17889922
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 100 000 - 0
174 Unknown_Attribute ----CK 100 100 000 - 109
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
177 Wear_Leveling_Count -O--CK 100 100 000 - 16946560
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 19
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 123
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 5189
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 100 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 330
194 Temperature_Celsius -O---- 053 000 000 - 53 (Min/Max 23/53)
195 Hardware_ECC_Recovered -O--CK 100 100 000 - 244501377
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 001 001 000 - 26457
231 Unknown_SSD_Attribute PO--CK 099 099 010 - 2
234 Unknown_Attribute -O--CK 100 100 --- - 66018
241 Total_LBAs_Written -O--CK 100 100 --- - 62500
242 Total_LBAs_Read -O--CK 100 100 --- - 38473
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 2699009
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 1970 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1970 [9] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
01 -- 50 00 01 00 00 00 00 00 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 00 41d+01:06:38.920 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 00 41d+01:06:38.920 NOP [Abort queued commands]
25 00 00 00 08 00 00 19 7a 2b f0 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 28 e0 e0 41d+01:06:33.890 READ DMA EXT
Error 1969 [8] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 19 7a 2b f0 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 28 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 08 00 00 19 7a 2b e8 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 41d+01:06:33.890 READ DMA EXT
Error 1968 [7] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 19 7a 2b f0 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 28 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 08 00 00 19 7a 2b e8 e0 e0 41d+01:06:33.890 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 41d+01:06:33.890 READ DMA EXT
Error 1967 [6] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
04 -- 51 00 00 00 00 00 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b1 00 c1 00 00 00 00 00 00 00 00 00 00 41d+01:06:27.190 DEVICE CONFIGURATION FREEZE LOCK [OBS-ACS-3]
f5 00 00 00 00 00 00 00 00 00 00 00 00 41d+01:06:27.190 SECURITY FREEZE LOCK
25 00 00 00 20 00 00 00 00 00 02 40 40 41d+01:06:27.150 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 01 40 40 41d+01:06:27.150 READ DMA EXT
25 00 00 00 01 00 00 00 00 00 00 40 40 41d+01:06:27.150 READ DMA EXT
Error 1966 [5] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ef 00 90 00 06 00 00 00 00 00 00 00 00 41d+01:06:25.710 SET FEATURES [Disable SATA feature]
ec 00 00 00 00 00 00 00 00 00 00 00 00 41d+01:06:25.710 IDENTIFY DEVICE
e1 00 00 00 00 00 00 00 00 00 00 40 40 41d+01:06:16.150 IDLE IMMEDIATE
ea 00 00 00 00 00 00 00 00 00 00 40 40 41d+01:06:15.920 FLUSH CACHE EXT
61 00 08 00 58 00 00 00 06 44 a8 40 40 41d+01:06:15.910 WRITE FPDMA QUEUED
Error 1965 [4] occurred at disk power-on lifetime: 16724 hours (696 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
e1 00 00 00 00 00 00 00 00 00 00 40 40 41d+01:06:16.150 IDLE IMMEDIATE
ea 00 00 00 00 00 00 00 00 00 00 40 40 41d+01:06:15.920 FLUSH CACHE EXT
61 00 08 00 58 00 00 00 06 44 a8 40 40 41d+01:06:15.910 WRITE FPDMA QUEUED
61 00 10 00 50 00 00 00 06 e2 28 40 40 41d+01:06:15.910 WRITE FPDMA QUEUED
61 00 40 00 48 00 00 15 6c 97 28 40 40 41d+01:06:15.910 WRITE FPDMA QUEUED
Error 1964 [3] occurred at disk power-on lifetime: 16227 hours (676 days + 3 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
01 -- 50 00 01 00 00 00 00 00 01 00 00
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
00 00 00 00 00 00 00 00 00 00 00 00 00 20d+07:48:26.470 NOP [Abort queued commands]
00 00 00 00 00 00 00 00 00 00 00 00 00 20d+07:48:26.470 NOP [Abort queued commands]
25 00 00 00 08 00 00 19 7a 2b f0 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 28 e0 e0 20d+07:48:21.440 READ DMA EXT
Error 1963 [2] occurred at disk power-on lifetime: 16227 hours (676 days + 3 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 19 7a 2b f0 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 28 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 08 00 00 19 7a 2b e8 e0 e0 20d+07:48:21.440 READ DMA EXT
25 00 00 00 20 00 00 19 79 8f 48 e0 e0 20d+07:48:21.440 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
View Git Blame Copy Permalink