mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
211 lines
9.9 KiB
Plaintext
211 lines
9.9 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p8 amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: SAMSUNG MZ7L3480HBLT-00A07
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 002538 ...
|
|
Firmware Version: JXTE204Q
|
|
User Capacity: 480,103,981,056 bytes [480 GB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic, zeroed
|
|
Device is: Not in smartctl database 7.3/5319
|
|
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed Aug 23 16:05:47 2023 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x53) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 35) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
9 Power_On_Hours -O--CK 099 099 000 - 2917
|
|
12 Power_Cycle_Count -O--CK 099 099 000 - 14
|
|
177 Wear_Leveling_Count PO--C- 099 099 005 - 18
|
|
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
|
|
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 870
|
|
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
|
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
|
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
|
184 End-to-End_Error PO--CK 100 100 097 - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O--CK 068 056 000 - 32
|
|
194 Temperature_Celsius -O---K 068 052 000 - 32 (Min/Max 27/48)
|
|
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
|
|
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
|
202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0
|
|
235 Unknown_Attribute -O--C- 099 099 000 - 5
|
|
241 Total_LBAs_Written -O--CK 099 099 000 - 2699360554
|
|
242 Total_LBAs_Read -O--CK 099 099 000 - 10031805
|
|
243 Unknown_Attribute -O--CK 100 100 000 - 0
|
|
244 Unknown_Attribute -O--CK 100 100 000 - 0
|
|
245 Unknown_Attribute -O--CK 100 100 000 - 65535
|
|
246 Unknown_Attribute -O--CK 100 100 000 - 65535
|
|
247 Unknown_Attribute -O--CK 100 100 000 - 65535
|
|
251 Unknown_Attribute -O--CK 100 100 000 - 8919759424
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x12 GPL R/O 1 SATA NCQ Non-Data log
|
|
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa5 SL VS 16 Device vendor specific log
|
|
0xce SL VS 16 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
256 0 65535 Read_scanning was never started
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: Active (0)
|
|
Current Temperature: 32 Celsius
|
|
Power Cycle Min/Max Temperature: 30/40 Celsius
|
|
Lifetime Min/Max Temperature: 27/48 Celsius
|
|
Specified Max Operating Temperature: 70 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
SMART Status: 0xc24f (PASSED)
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 10 minutes
|
|
Temperature Logging Interval: 10 minutes
|
|
Min/Max recommended Temperature: 0/70 Celsius
|
|
Min/Max Temperature Limit: 0/70 Celsius
|
|
Temperature History Size (Index): 128 (106)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 14 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 2917 --- Power-on Hours
|
|
0x01 0x018 6 2699360554 --- Logical Sectors Written
|
|
0x01 0x020 6 123013773 --- Number of Write Commands
|
|
0x01 0x028 6 10031805 --- Logical Sectors Read
|
|
0x01 0x030 6 468629 --- Number of Read Commands
|
|
0x01 0x038 6 2901000 --- Date and Time TimeStamp
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 32 --- Current Temperature
|
|
0x05 0x020 1 48 --- Highest Temperature
|
|
0x05 0x028 1 27 --- Lowest Temperature
|
|
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 107 --- Number of Hardware Resets
|
|
0x06 0x010 4 0 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|