mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
190 lines
8.9 KiB
Plaintext
190 lines
8.9 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p6 amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Samsung based SSDs
|
|
Device Model: Samsung SSD 850 EVO 250GB
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 002538 ...
|
|
Firmware Version: EMT02B6Q
|
|
User Capacity: 250,059,350,016 bytes [250 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Fri May 28 23:37:40 2021 EDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x53) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 133) minutes.
|
|
SCT capabilities: (0x003d) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
9 Power_On_Hours -O--CK 093 093 000 - 31665
|
|
12 Power_Cycle_Count -O--CK 099 099 000 - 131
|
|
177 Wear_Leveling_Count PO--C- 090 090 000 - 192
|
|
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
|
|
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
|
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
|
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
|
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O--CK 077 061 000 - 23
|
|
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
|
|
199 CRC_Error_Count -OSRCK 100 100 000 - 0
|
|
235 POR_Recovery_Count -O--C- 099 099 000 - 68
|
|
241 Total_LBAs_Written -O--CK 099 099 000 - 50960617433
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 SL VS 16 Device vendor specific log
|
|
0xa5 SL VS 16 Device vendor specific log
|
|
0xce SL VS 16 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 31664 -
|
|
# 2 Short offline Completed without error 00% 31663 -
|
|
# 3 Short offline Completed without error 00% 31662 -
|
|
# 4 Short offline Completed without error 00% 31661 -
|
|
# 5 Short offline Completed without error 00% 31660 -
|
|
# 6 Short offline Completed without error 00% 31659 -
|
|
# 7 Short offline Completed without error 00% 31658 -
|
|
# 8 Short offline Completed without error 00% 31657 -
|
|
# 9 Short offline Completed without error 00% 31656 -
|
|
#10 Short offline Completed without error 00% 31655 -
|
|
#11 Short offline Completed without error 00% 31654 -
|
|
#12 Short offline Completed without error 00% 31653 -
|
|
#13 Short offline Completed without error 00% 31652 -
|
|
#14 Short offline Completed without error 00% 31651 -
|
|
#15 Short offline Completed without error 00% 31650 -
|
|
#16 Short offline Completed without error 00% 31649 -
|
|
#17 Short offline Completed without error 00% 31648 -
|
|
#18 Short offline Completed without error 00% 31647 -
|
|
#19 Short offline Completed without error 00% 31646 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
255 0 65535 Read_scanning was never started
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 256 (0x0100)
|
|
Device State: Active (0)
|
|
Current Temperature: 23 Celsius
|
|
Power Cycle Min/Max Temperature: 19/37 Celsius
|
|
Lifetime Min/Max Temperature: 19/40 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 10 minutes
|
|
Min/Max recommended Temperature: 0/70 Celsius
|
|
Min/Max Temperature Limit: 0/70 Celsius
|
|
Temperature History Size (Index): 128 (14)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 39 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 39 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|
|
|
|
|