mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
196 lines
9.7 KiB
Plaintext
196 lines
9.7 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.1-RELEASE-p5 amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: TS1TMSA470T
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 7c3548 ...
|
|
Firmware Version: 22Z3V4EI
|
|
User Capacity: 1,024,209,543,168 bytes [1.02 TB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic, zeroed
|
|
Device is: Not in smartctl database 7.3/5528
|
|
ATA Version is: ACS-3 T13/2161-D revision 5
|
|
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Sat Nov 2 17:04:07 2024 JST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 254 (maximum performance)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 30) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate ------ 100 100 000 - 0
|
|
5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
|
9 Power_On_Hours ------ 100 100 000 - 5696
|
|
12 Power_Cycle_Count ------ 100 100 000 - 67
|
|
148 Unknown_Attribute ------ 100 100 000 - 5545
|
|
149 Unknown_Attribute ------ 100 100 000 - 161
|
|
150 Unknown_Attribute ------ 100 100 000 - 0
|
|
151 Unknown_Attribute ------ 100 100 000 - 66
|
|
159 Unknown_Attribute ------ 100 100 000 - 0
|
|
160 Unknown_Attribute ------ 100 100 000 - 0
|
|
161 Unknown_Attribute ------ 100 100 000 - 104
|
|
163 Unknown_Attribute ------ 100 100 000 - 15
|
|
164 Unknown_Attribute ------ 100 100 000 - 47228
|
|
165 Unknown_Attribute ------ 100 100 000 - 32
|
|
166 Unknown_Attribute ------ 100 100 000 - 22
|
|
167 Unknown_Attribute ------ 100 100 000 - 30
|
|
168 Unknown_Attribute ------ 100 100 000 - 3000
|
|
169 Unknown_Attribute ------ 100 100 000 - 99
|
|
177 Wear_Leveling_Count ------ 100 100 050 - 0
|
|
181 Program_Fail_Cnt_Total ------ 100 100 000 - 0
|
|
182 Erase_Fail_Count_Total ------ 100 100 000 - 0
|
|
192 Power-Off_Retract_Count ------ 100 100 000 - 16
|
|
194 Temperature_Celsius ------ 100 100 000 - 71
|
|
195 Hardware_ECC_Recovered ------ 100 100 000 - 0
|
|
196 Reallocated_Event_Count ------ 100 100 016 - 0
|
|
199 UDMA_CRC_Error_Count ------ 100 100 050 - 0
|
|
232 Available_Reservd_Space ------ 100 100 000 - 100
|
|
241 Total_LBAs_Written ------ 100 100 000 - 295707
|
|
242 Total_LBAs_Read ------ 100 100 000 - 576
|
|
245 Unknown_Attribute ------ 100 100 000 - 991788
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x24 GPL R/O 88 Current Device Internal Status Data log
|
|
0x25 GPL R/O 64 Saved Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Completed [00% left] (0-65535)
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 67 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 5696 --- Power-on Hours
|
|
0x01 0x018 6 2199588016 --- Logical Sectors Written
|
|
0x01 0x020 6 169368319 --- Number of Write Commands
|
|
0x01 0x028 6 37770482 --- Logical Sectors Read
|
|
0x01 0x030 6 1060302 --- Number of Read Commands
|
|
0x01 0x038 6 3328252168 --- Date and Time TimeStamp
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 16 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 71 --- Current Temperature
|
|
0x05 0x010 1 71 --- Average Short Term Temperature
|
|
0x05 0x018 1 71 --- Average Long Term Temperature
|
|
0x05 0x020 1 91 --- Highest Temperature
|
|
0x05 0x028 1 31 --- Lowest Temperature
|
|
0x05 0x030 1 84 --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 0 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 83 --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 0 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 234 --- Time in Over-Temperature
|
|
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 55 --- Number of Hardware Resets
|
|
0x06 0x010 4 0 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
|