mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
188 lines
8.5 KiB
Plaintext
188 lines
8.5 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Silicon Motion based SSDs
|
|
Device Model: TS120GSSD220S
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 7c3548 ...
|
|
Firmware Version: V8T32c18
|
|
User Capacity: 120,034,123,776 bytes [120 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ACS-3, ATA8-ACS T13/1699-D revision 6
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Thu May 26 22:50:41 2022 CST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 1) seconds.
|
|
Offline data collection
|
|
capabilities: (0x59) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 3) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 11) minutes.
|
|
SCT capabilities: (0x0039) SCT Status supported.
|
|
SCT Error Recovery Control supported.
|
|
SCT Feature Control supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
9 Power_On_Hours -O--CK 100 100 000 - 4895
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 54
|
|
160 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
|
|
161 Valid_Spare_Block_Cnt -O--CK 100 100 000 - 66
|
|
163 Initial_Bad_Block_Count -O--CK 100 100 000 - 91
|
|
164 Total_Erase_Count -O--CK 100 100 000 - 939
|
|
165 Max_Erase_Count -O--CK 100 100 000 - 4
|
|
166 Min_Erase_Count -O--CK 100 100 000 - 0
|
|
167 Average_Erase_Count -O--CK 100 100 000 - 1
|
|
168 Max_Erase_Count_of_Spec -O--CK 100 100 000 - 1500
|
|
169 Remaining_Lifetime_Perc -O--CK 100 100 000 - 99
|
|
181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0
|
|
182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
|
|
194 Temperature_Celsius -O---K 100 100 030 - 41
|
|
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
|
200 Unknown_SSD_Attribute -O--CK 100 100 000 - 91
|
|
201 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
|
|
202 Unknown_SSD_Attribute -O--CK 100 100 000 - 0
|
|
203 Run_Out_Cancel -O--CK 100 100 000 - 0
|
|
232 Available_Reservd_Space -O--CK 100 100 000 - 100
|
|
241 Host_Writes_32MiB -O--CK 100 100 000 - 5275
|
|
242 Host_Reads_32MiB -O--CK 100 100 000 - 1939
|
|
245 TLC_Writes_32MiB -O--CK 100 100 000 - 9714
|
|
250 Read_Error_Retry_Rate -O--CK 100 100 000 - 9714
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 5 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
SMART Selective self-test log data structure revision number 0
|
|
Note: revision number not 1 implies that no selective self-test has ever been run
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 0 (0x0000)
|
|
Device State: Active (0)
|
|
Current Temperature: 0 Celsius
|
|
Power Cycle Min/Max Temperature: 28/28 Celsius
|
|
Lifetime Min/Max Temperature: 0/36 Celsius
|
|
Specified Max Operating Temperature: 100 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 0 minutes
|
|
Temperature Logging Interval: 0 minutes
|
|
Min/Max recommended Temperature: 0/100 Celsius
|
|
Min/Max Temperature Limit: -10/125 Celsius
|
|
Temperature History Size (Index): 128 (1)
|
|
|
|
SCT Error Recovery Control:
|
|
Read: Disabled
|
|
Write: Disabled
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 54 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 4895 --- Power-on Hours
|
|
0x01 0x018 6 345720007 --- Logical Sectors Written
|
|
0x01 0x020 6 18393744 --- Number of Write Commands
|
|
0x01 0x028 6 127115489 --- Logical Sectors Read
|
|
0x01 0x030 6 1353246 --- Number of Read Commands
|
|
0x01 0x038 6 17621288589 --- Date and Time TimeStamp
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 419 --- Number of Hardware Resets
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
|
|
|