mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
97 lines
5.1 KiB
Plaintext
97 lines
5.1 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [x86_64-unknown-openbsd6.8] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Device Model: TS240GMTS420S
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 7c3548 ...
|
|
Firmware Version: S0509A0
|
|
User Capacity: 240,057,409,536 bytes [240 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: M.2
|
|
Device is: Not in smartctl database [for details use: -P showall]
|
|
ATA Version is: ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Mon Oct 19 07:22:01 2020 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART Status not supported: Incomplete response, ATA output registers missing
|
|
SMART overall-health self-assessment test result: PASSED
|
|
Warning: This result is based on an Attribute check.
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x11) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0002) Does not save SMART data before
|
|
entering power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 10) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
1 Raw_Read_Error_Rate 0x0032 100 100 050 Old_age Always - 0
|
|
5 Reallocated_Sector_Ct 0x0032 100 100 050 Old_age Always - 0
|
|
9 Power_On_Hours 0x0032 100 100 050 Old_age Always - 212
|
|
12 Power_Cycle_Count 0x0032 100 100 050 Old_age Always - 151
|
|
160 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 0
|
|
161 Unknown_Attribute 0x0033 100 100 050 Pre-fail Always - 100
|
|
163 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 6
|
|
164 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 3060
|
|
165 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 5
|
|
166 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1
|
|
167 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 2
|
|
168 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 1000
|
|
169 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 100
|
|
175 Program_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
|
|
176 Erase_Fail_Count_Chip 0x0032 100 100 050 Old_age Always - 0
|
|
177 Wear_Leveling_Count 0x0032 100 100 050 Old_age Always - 0
|
|
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 050 Old_age Always - 0
|
|
181 Program_Fail_Cnt_Total 0x0032 100 100 050 Old_age Always - 0
|
|
182 Erase_Fail_Count_Total 0x0032 100 100 050 Old_age Always - 0
|
|
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 28
|
|
194 Temperature_Celsius 0x0022 100 100 050 Old_age Always - 58
|
|
195 Hardware_ECC_Recovered 0x0032 100 100 050 Old_age Always - 0
|
|
196 Reallocated_Event_Count 0x0032 100 100 050 Old_age Always - 0
|
|
197 Current_Pending_Sector 0x0032 100 100 050 Old_age Always - 0
|
|
198 Offline_Uncorrectable 0x0032 100 100 050 Old_age Always - 0
|
|
199 UDMA_CRC_Error_Count 0x0032 100 100 050 Old_age Always - 0
|
|
232 Available_Reservd_Space 0x0032 100 100 050 Old_age Always - 100
|
|
241 Total_LBAs_Written 0x0030 100 100 050 Old_age Offline - 5477
|
|
242 Total_LBAs_Read 0x0030 100 100 050 Old_age Offline - 2654
|
|
245 Unknown_Attribute 0x0032 100 100 050 Old_age Always - 822
|
|
|
|
SMART Error Log Version: 1
|
|
No Errors Logged
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
|
|
|