mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
205 lines
10 KiB
Plaintext
205 lines
10 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p16-HBSD amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SandForce Driven SSDs
|
|
Device Model: TS256GSSD320
|
|
Serial Number: --
|
|
LU WWN Device Id: 0 0232d0 ...
|
|
Firmware Version: 5.6.0
|
|
User Capacity: 256,060,514,304 bytes [256 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
TRIM Command: Available
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Tue Apr 27 14:21:48 2021 BST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 254 (maximum performance)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x02) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7d) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Abort Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 48) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x0025) SCT Status supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate -O--CK 120 120 050 - 2/0
|
|
5 Retired_Block_Count PO--CK 084 084 003 - 0
|
|
9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 40h+51m+46.490s
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 4
|
|
171 Program_Fail_Count -O-R-- 100 100 000 - 0
|
|
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
|
174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 4
|
|
177 Wear_Range_Delta ------ 000 000 000 - 99
|
|
181 Program_Fail_Count -O-R-- 100 100 000 - 0
|
|
182 Erase_Fail_Count -O--CK 100 100 000 - 0
|
|
187 Reported_Uncorrect -O--C- 100 100 000 - 0
|
|
194 Temperature_Celsius -O---K 032 083 000 - 32 (Min/Max -9/83)
|
|
195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 2/0
|
|
196 Reallocated_Event_Count PO--CK 084 084 003 - 0
|
|
201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 2/0
|
|
204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 2/0
|
|
230 Life_Curve_Status PO--C- 100 100 000 - 100
|
|
231 SSD_Life_Left PO--C- 100 100 010 - 17179869184
|
|
233 SandForce_Internal -O--CK 000 000 000 - 53
|
|
234 SandForce_Internal -O--CK 000 000 000 - 37
|
|
241 Lifetime_Writes_GiB -O--CK 000 000 000 - 37
|
|
242 Lifetime_Reads_GiB -O--CK 000 000 000 - 5
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x04 GPL,SL R/O 16 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xb7 GPL,SL VS 16 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log not supported
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 2314 -
|
|
# 2 Short offline Completed without error 00% 2314 -
|
|
# 3 Short offline Completed without error 00% 2311 -
|
|
# 4 Short offline Completed without error 00% 2311 -
|
|
# 5 Short offline Completed without error 00% 2310 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 0 (0x0000)
|
|
Device State: Active (0)
|
|
Current Temperature: 32 Celsius
|
|
Power Cycle Min/Max Temperature: -9/83 Celsius
|
|
Lifetime Min/Max Temperature: -9/83 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 1 minute
|
|
Temperature Logging Interval: 10 minutes
|
|
Min/Max recommended Temperature: 0/65 Celsius
|
|
Min/Max Temperature Limit: 0/70 Celsius
|
|
Temperature History Size (Index): 478 (64)
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 2) ==
|
|
0x01 0x008 4 4 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 40 --- Power-on Hours
|
|
0x01 0x018 6 78310910 --- Logical Sectors Written
|
|
0x01 0x028 6 10579202 --- Logical Sectors Read
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 32 --- Current Temperature
|
|
0x05 0x010 1 32 --- Average Short Term Temperature
|
|
0x05 0x018 1 24 --- Average Long Term Temperature
|
|
0x05 0x020 1 47 --- Highest Temperature
|
|
0x05 0x028 1 7 --- Lowest Temperature
|
|
0x05 0x030 1 39 --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 11 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 34 --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 24 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 3 --- Number of Hardware Resets
|
|
0x06 0x010 4 1418 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0008 2 0 Device-to-host non-data FIS retries
|
|
0x0009 2 16 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|
0x0002 2 0 R_ERR response for data FIS
|
|
0x0005 2 0 R_ERR response for non-data FIS
|
|
0x000b 2 0 CRC errors within host-to-device FIS
|
|
0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|
|