mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
188 lines
9.0 KiB
Plaintext
188 lines
9.0 KiB
Plaintext
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.1-RELEASE-p19-HBSD amd64] (local build)
|
|
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: WD Blue / Red / Green SSDs
|
|
Device Model: WDC WDS120G1G0A-00SS50
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 001b44 ...
|
|
Firmware Version: Z3311000
|
|
User Capacity: 120,034,123,776 bytes [120 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic, zeroed
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Wed Aug 18 02:04:42 2021 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x11) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 10) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
|
9 Power_On_Hours -O--CK 000 100 000 - 22562
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 1037
|
|
165 Block_Erase_Count -O--CK 100 100 000 - 21831717099362
|
|
166 Minimum_PE_Cycles_TLC -O--CK 100 100 000 - 36
|
|
167 Max_Bad_Blocks_per_Die -O--CK 100 100 000 - 0
|
|
168 Maximum_PE_Cycles_TLC -O--CK 100 100 000 - 78
|
|
169 Total_Bad_Blocks -O--CK 100 100 000 - 0
|
|
170 Grown_Bad_Blocks -O--CK 100 100 000 - 0
|
|
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
|
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
|
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 54
|
|
174 Unexpected_Power_Loss -O--CK 100 100 000 - 786
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
188 Command_Timeout -O--CK 100 100 000 - 0
|
|
194 Temperature_Celsius -O---K 065 045 000 - 35 (Min/Max 0/55)
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 5
|
|
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x07cb030c07cb
|
|
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
|
233 NAND_GB_Written_TLC -O--CK 100 100 000 - 6552
|
|
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 27987
|
|
241 Host_Writes_GiB ----CK 253 253 000 - 18809
|
|
242 Host_Reads_GiB ----CK 253 253 000 - 42843
|
|
244 Temp_Throttle_Status -O--CK 000 100 000 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xde GPL VS 8 Device vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
Device Error Count: 154 (device log contains only the most recent 4 errors)
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 154 [3] log entry is empty
|
|
Error 153 [2] log entry is empty
|
|
Error 152 [1] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
04 -- 51 00 00 00 00 00 00 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
b0 00 d1 01 01 00 00 4f 00 c2 01 40 08 00:00:00.000 SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
|
|
2f 00 00 01 01 00 00 00 00 00 03 40 08 00:00:00.000 READ LOG EXT
|
|
2f 00 00 01 01 00 00 00 00 00 00 40 08 00:00:00.000 READ LOG EXT
|
|
b0 00 d5 01 01 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART READ LOG
|
|
b0 00 da 00 00 00 00 4f 00 c2 00 40 08 00:00:00.000 SMART RETURN STATUS
|
|
|
|
Error 151 [0] log entry is empty
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 8960 -
|
|
# 2 Extended offline Completed without error 00% 8868 -
|
|
# 3 Short offline Completed without error 00% 8799 -
|
|
# 4 Short offline Aborted by host 50% 5130 -
|
|
# 5 Short offline Aborted by host 50% 5130 -
|
|
# 6 Extended offline Completed without error 00% 3553 -
|
|
# 7 Short offline Completed without error 00% 3552 -
|
|
# 8 Extended offline Completed without error 00% 2601 -
|
|
# 9 Short offline Completed without error 00% 1960 -
|
|
#10 Short offline Completed without error 00% 1146 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 1037 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 22562 --- Power-on Hours
|
|
0x01 0x018 6 790731370 --- Logical Sectors Written
|
|
0x01 0x020 6 757785805 --- Number of Write Commands
|
|
0x01 0x028 6 3949969395 --- Logical Sectors Read
|
|
0x01 0x030 6 554882775 --- Number of Read Commands
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 1 --- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x000a 4 26 Device-to-host register FISes sent due to a COMRESET
|
|
|