mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
189 lines
9.6 KiB
Plaintext
189 lines
9.6 KiB
Plaintext
smartctl 7.4 2023-08-01 r5530 [FreeBSD 14.0-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: WD Blue / Red / Green SSDs
|
|
Device Model: WDC WDS480G2G0A-00JH30
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 001b44 ...
|
|
Firmware Version: UG870400
|
|
User Capacity: 480,103,981,056 bytes [480 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic
|
|
Device is: In smartctl database 7.3/5528
|
|
ATA Version is: ACS-3, ACS-2 T13/2015-D revision 3
|
|
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Mon Feb 5 19:07:48 2024 -03
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Disabled
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 120) seconds.
|
|
Offline data collection
|
|
capabilities: (0x11) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 83) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 1
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0
|
|
9 Power_On_Hours -O--CK 100 100 000 - 6150
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 1637
|
|
165 Block_Erase_Count -O--CK 100 100 000 - 1738
|
|
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 14
|
|
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 10
|
|
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 15
|
|
169 Total_Bad_Blocks -O--CK 100 100 --- - 90
|
|
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
|
171 Program_Fail_Count -O--CK 100 100 000 - 0
|
|
172 Erase_Fail_Count -O--CK 100 100 000 - 0
|
|
173 Average_PE_Cycles_TLC -O--CK 100 100 000 - 14
|
|
174 Unexpected_Power_Loss -O--CK 100 100 000 - 282
|
|
184 End-to-End_Error -O--CK 100 100 --- - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|
188 Command_Timeout -O--CK 100 100 --- - 0
|
|
194 Temperature_Celsius -O---K 068 053 000 - 32 (Min/Max 2/53)
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
|
230 Media_Wearout_Indicator -O--CK 100 100 000 - 0x046002500460
|
|
232 Available_Reservd_Space PO--CK 100 100 005 - 100
|
|
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 7117
|
|
234 NAND_GB_Written_SLC -O--CK 100 100 000 - 17603
|
|
241 Host_Writes_GiB ----CK 100 100 000 - 7840
|
|
242 Host_Reads_GiB ----CK 100 100 000 - 6973
|
|
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 1 Comprehensive SMART error log
|
|
0x03 GPL R/O 16 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 1 Device vendor specific log
|
|
0xa2 GPL,SL VS 2 Device vendor specific log
|
|
0xa3-0xa4 GPL,SL VS 1 Device vendor specific log
|
|
0xa7 GPL,SL VS 1 Device vendor specific log
|
|
0xa9 GPL,SL VS 4 Device vendor specific log
|
|
|
|
Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum.
|
|
SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
|
No Errors Logged
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 5785 -
|
|
# 2 Short offline Completed without error 00% 4850 -
|
|
# 3 Short offline Self-test routine in progress 20% 4850 -
|
|
# 4 Short offline Completed without error 00% 4836 -
|
|
# 5 Short offline Completed without error 00% 4817 -
|
|
# 6 Short offline Completed without error 00% 4810 -
|
|
# 7 Short offline Completed without error 00% 4806 -
|
|
# 8 Short offline Completed without error 00% 4804 -
|
|
# 9 Short offline Completed without error 00% 4803 -
|
|
#10 Short offline Completed without error 00% 4801 -
|
|
#11 Short offline Completed without error 00% 4797 -
|
|
#12 Short offline Completed without error 00% 4792 -
|
|
#13 Short offline Completed without error 00% 4789 -
|
|
#14 Extended offline Completed without error 00% 4781 -
|
|
#15 Short offline Completed without error 00% 4775 -
|
|
#16 Short offline Completed without error 00% 4771 -
|
|
#17 Short offline Completed without error 00% 4769 -
|
|
#18 Short offline Completed without error 00% 4760 -
|
|
#19 Short offline Completed without error 00% 4747 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 1637 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 6150 --- Power-on Hours
|
|
0x01 0x018 6 16443476473 --- Logical Sectors Written
|
|
0x01 0x028 6 14624684072 --- Logical Sectors Read
|
|
0x01 0x038 6 6150 --- Date and Time TimeStamp
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 32 --- Current Temperature
|
|
0x05 0x010 1 - --- Average Short Term Temperature
|
|
0x05 0x018 1 - --- Average Long Term Temperature
|
|
0x05 0x020 1 52 --- Highest Temperature
|
|
0x05 0x028 1 12 --- Lowest Temperature
|
|
0x05 0x030 1 - --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 - --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 - --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 - --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 95 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 0 --- Time in Under-Temperature
|
|
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 3 N-- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
0x0009 2 42 Transition from drive PhyRdy to drive PhyNRdy
|
|
0x000a 2 43 Device-to-host register FISes sent due to a COMRESET
|
|
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
|
|
|
|
|