mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
230 lines
11 KiB
Plaintext
230 lines
11 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-STABLE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: WD Blue / Red / Green SSDs
|
|
Device Model: WDC WDS500G2B0A-00SM50
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 001b44 ...
|
|
Firmware Version: 401020WD
|
|
User Capacity: 500,107,862,016 bytes [500 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Rotation Rate: Solid State Device
|
|
Form Factor: 2.5 inches
|
|
TRIM Command: Available, deterministic, zeroed
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
|
|
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Tue Jun 14 11:01:00 2022 CDT
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x11) SMART execute Offline immediate.
|
|
No Auto Offline data collection support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
No Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 10) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 4
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
|
|
9 Power_On_Hours -O--CK 100 100 --- - 6528
|
|
12 Power_Cycle_Count -O--CK 100 100 --- - 108
|
|
165 Block_Erase_Count -O--CK 100 100 --- - 2491081006659
|
|
166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 42
|
|
167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 41
|
|
168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 81
|
|
169 Total_Bad_Blocks -O--CK 100 100 --- - 190
|
|
170 Grown_Bad_Blocks -O--CK 100 100 --- - 0
|
|
171 Program_Fail_Count -O--CK 100 100 --- - 0
|
|
172 Erase_Fail_Count -O--CK 100 100 --- - 0
|
|
173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 56
|
|
174 Unexpected_Power_Loss -O--CK 100 100 --- - 4
|
|
184 End-to-End_Error -O--CK 100 100 --- - 0
|
|
187 Reported_Uncorrect -O--CK 100 100 --- - 5675
|
|
188 Command_Timeout -O--CK 100 100 --- - 0
|
|
194 Temperature_Celsius -O---K 070 044 --- - 30 (Min/Max 22/44)
|
|
199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0
|
|
230 Media_Wearout_Indicator -O--CK 081 081 --- - 0x5103053c5103
|
|
232 Available_Reservd_Space PO--CK 100 100 004 - 100
|
|
233 NAND_GB_Written_TLC -O--CK 100 100 --- - 28816
|
|
234 NAND_GB_Written_SLC -O--CK 100 100 --- - 513669
|
|
241 Host_Writes_GiB ----CK 253 253 --- - 452728
|
|
242 Host_Reads_GiB ----CK 253 253 --- - 26101
|
|
244 Temp_Throttle_Status -O--CK 000 100 --- - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x24 GPL R/O 1957 Current Device Internal Status Data log
|
|
0x25 GPL R/O 1957 Saved Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xde GPL VS 8 Device vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|
Device Error Count: 5675 (device log contains only the most recent 4 errors)
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 5675 [2] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 f8 00 00 1c 5c 8f c0 40 08 Error: UNC at LBA = 0x1c5c8fc0 = 475828160
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 40 00 f8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.949 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 e8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 d8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
|
|
Error 5674 [1] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 e8 00 00 1c 5c 8f c0 40 08 Error: UNC at LBA = 0x1c5c8fc0 = 475828160
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 40 00 e8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.819 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 d8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 c8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
|
|
Error 5673 [0] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 d8 00 00 1c 5c 8f c0 40 08 Error: UNC at LBA = 0x1c5c8fc0 = 475828160
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 40 00 d8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.689 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 c8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 b8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
|
|
Error 5672 [3] occurred at disk power-on lifetime: 6528 hours (272 days + 0 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 41 00 c8 00 00 1c 5c 8f c0 40 08 Error: UNC at LBA = 0x1c5c8fc0 = 475828160
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 40 00 c8 00 00 1c 5c 8f c0 40 08 21d+17:53:34.559 READ FPDMA QUEUED
|
|
2f 00 00 00 01 00 00 00 00 00 10 00 08 00:00:00.000 READ LOG EXT
|
|
60 00 40 00 b8 00 00 1c 5c 8f c0 40 08 00:00:00.000 READ FPDMA QUEUED
|
|
61 00 01 00 b0 00 00 00 00 f3 0b 40 08 00:00:00.000 WRITE FPDMA QUEUED
|
|
06 00 01 00 01 00 00 00 00 00 00 40 08 00:00:00.000 DATA SET MANAGEMENT
|
|
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 1872 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 108 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 6528 --- Power-on Hours
|
|
0x01 0x018 6 949440327609 --- Logical Sectors Written
|
|
0x01 0x020 6 18309989910 --- Number of Write Commands
|
|
0x01 0x028 6 54739267157 --- Logical Sectors Read
|
|
0x01 0x030 6 249902214 --- Number of Read Commands
|
|
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|
0x07 0x008 1 5 N-- Percentage Used Endurance Indicator
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x0001 4 0 Command failed due to ICRC error
|
|
0x0002 4 0 R_ERR response for data FIS
|
|
0x0005 4 0 R_ERR response for non-data FIS
|
|
0x000a 4 68 Device-to-host register FISes sent due to a COMRESET
|
|
|