The TERM variable is usually set to "dumb" to indicate that the terminal
does not support any ANSI escape sequences. Presently, ls does not honor
this variable and outputs colors anyhow which results in unreadable
output, unless the user explicitly disables colors using `ls
--color=never`. The rational behind this change is that ls should "just
work" by default, even on dumb terminals.
For this reason, this patch adds a check which additionally consults the
TERM variable before printing any colors. This is analogous to the
existing check for ensuring that standard output is a tty. As such,
colors can still be forced with `--color=force`, even if TERM is set to
dumb.
function old new delta
is_TERM_dumb - 40 +40
ls_main 579 598 +19
.rodata 103246 103251 +5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 64/0) Total: 64 bytes
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Even following current Internet standards, it can be perfectly
legitimate to issue IPv4 addresses that end in .0 or .255 via DHCP --
this can happen whenever the network is larger than /8. For example,
10.3.4.0 and 10.3.4.255 are legitimate host addresses in 10/8 or 10.3/16.
(We also want to be able to issue .0 addresses in smaller networks
following our proposed kernel patch and standards changes.)
This behavior is already fully controllable by the user, simply by
setting start_ip and end_ip correctly. Users who don't want to issue
.0 or .255 should set start_ip greater than .0 or end_ip less than .255
and udhcpd will already respect these bounds. (This is also the case
for other DHCP servers -- the recommended example configurations will
default to a lower bound starting with .1 or some other value, which is
typically appropriate, but the user is still allowed to change this to
.0 -- or to a range that overlaps a .0 or .255 address -- if so desired.)
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
SRV lookups are supported since "6b4960155 nslookup: implement support
for SRV records" and should therefore be mentioned as a possible
QUERY_TYPE in the help message.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This restores old behavior where we slept for 1/2 of lease, then tried renewing,
thel slept for 1/4 and tried again, etc. But now we will NOT be listening to
all packets for 1/2 of lease time, processing (rejecting) everyone else's
DHCP traffic.
We'll go back to bound state, where we have no listening socket at all.
function old new delta
udhcpc6_main 2600 2655 +55
udhcpc_main 2608 2625 +17
.rodata 103250 103249 -1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 72/-1) Total: 71 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
client_data.vendorclass, .hostname and .fqdn probably need the same treatment:
just insert them into the list of -x opts, get rid of
if (client_data.vendorclass)
udhcp_add_binary_option(packet, client_data.vendorclass);
if (client_data.hostname)
udhcp_add_binary_option(packet, client_data.hostname);
if (client_data.fqdn)
udhcp_add_binary_option(packet, client_data.fqdn);
function old new delta
udhcp_insert_new_option - 166 +166
perform_release 171 207 +36
perform_d6_release 227 259 +32
udhcpc6_main 2558 2580 +22
init_d6_packet 103 84 -19
udhcpc_main 2585 2564 -21
attach_option 397 253 -144
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/3 up/down: 256/-184) Total: 72 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Lines that have no content apart from automatic indentation should
be treated as empty when the user hits return or ESC.
The implementation uses the global variable 'indentcol'. Usually
this is zero. It can also be -1 to indicate an 'O' (open above)
command, replacing the overloading of the tabstop option bit.
A value greater than zero indicates that the current line has
been autoindented to the given column (or that the autoindent has
been adjusted with ctrl-D). Any other change to the line resets
'indentcol' to zero.
Replace strspn() with ident_len(). The latter handles the unlikely
case that it's called on the last line of a file which doesn't have
a terminating newline.
function old new delta
char_insert 741 912 +171
indent_len - 42 +42
do_cmd 4781 4785 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 217/0) Total: 217 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Autoindent took a copy of the indent from a neighbouring line, which
may not have respected the expandtab setting.
Determine the target column and construct a suitable indent. This
will consist entirely of spaces if expandtab is enabled or an
efficient combination of tabs and spaces otherwise.
function old new delta
char_insert 719 741 +22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 22/0) Total: 22 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 24effc7a3 (vi: cursor positioning after whole-line 'y')
tried to save a few bytes by treating whole-line deletion the
same as whole-line yank. If the deletion removed the last lines
of the file the cursor was left beyond the end of the file.
Revert the part of the commit related to whole-line deletion.
Position the cursor on the first non-whitespace character of the
line when whole lines are 'put'.
function old new delta
do_cmd 4759 4781 +22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 22/0) Total: 22 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 13776, before this fix the renew never times out.
function old new delta
udhcpc_main 2541 2585 +44
udhcpc6_main 2567 2558 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 44/-9) Total: 35 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For one, an attacker can try to overload us by just opening and immediately
closing tons of connections - reduce our work to the minimum for this case.
function old new delta
handle_incoming_and_exit 2172 2200 +28
.rodata 103225 103246 +21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 49/0) Total: 49 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes proxy work for any type of requests.
function old new delta
handle_incoming_and_exit 2240 2172 -68
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
':wq' or ':x' should issue a warning if there are more files to edit,
unless they're followed by '!'.
function old new delta
colon 3911 3960 +49
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 49/0) Total: 49 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'y' command to yank text should leave the cursor at the start
of the range. This mostly works correctly in BusyBox vi but not
for whole-line yanks with backward motion, e.g. '2yk' to yank two
lines backwards. In this case the cursor is left at the end of the
range.
Fix this by returning the actual range from find_range(). Cursor
positioning following whole-line deletion is inconsistent between
vim and traditional vi. For BusyBox vi chose the option that uses
least code without being exactly compatible with either.
Also, find_range() preserved the value of 'dot', the current cursor
position. Since this isn't used by either caller of find_range()
we can save a few bytes by not bothering.
function old new delta
do_cmd 4730 4759 +29
find_range 749 686 -63
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 29/-63) Total: -34 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This allows to fix a problem that we wait for renew replies
for up to half the lease (!!!) if they never come.
Make it so that lease of 60 seconds is not "rounded up" to 120 seconds -
set lower "sanity limit" to 30 seconds.
After 3 failed renew attempts, switch to rebind.
After this change, we can have more flexible choice of when to do
the first renew - does not need to be equal to lease / 2.
function old new delta
udhcpc6_main 2568 2576 +8
.rodata 103339 103294 -45
udhcpc_main 2609 2550 -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 8/-104) Total: -96 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This resolves failures like
wget: server returned error: HTTP/1.1 307 Temporary Redirect
Signed-off-by: Jeremy Lin <jeremy.lin@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 7a8ceb4eb (vi: changes to line addresses for colon commands)
was supposed to address the issue:
When the last address is empty it should refer to the current line.
This was intended to allow ranges of the form '1,' with an empty
last address. It should have been expressed as:
When the last address is empty *and the second last isn't* it
should refer to the current line.
Otherwise a command like ':w' only writes the current line resulting
in serious loss of data.
function old new delta
colon 3906 3911 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Track the current and alternate filenames. The placeholders '%'
and '#' can be used in arguments to colon commands to represent
the current and alternate filenames respectively. Backslash can
be used to allow literal '%' and '#' characters to be entered.
This feature is controlled by the configuration option
FEATURE_VI_COLON_EXPAND.
function old new delta
expand_args - 198 +198
colon 3751 3927 +176
update_filename - 70 +70
init_filename - 48 +48
.rodata 105218 105239 +21
get_one_char 115 124 +9
edit_file 835 838 +3
do_cmd 4724 4727 +3
init_text_buffer 190 172 -18
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 5/1 up/down: 528/-18) Total: 510 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It was possible for get_input_line() to store its NUL terminator
one character beyond the end of its buffer.
Code shrink in colon():
- Certain colon commands can be matched exactly, as any shorter
string would be matched earlier, e.g. ':wq' versus ':write'.
- Command matching is now case sensitive so there's no need to
check for 'N' or 'Q' suffixes.
- Rewrite how commands and arguments are split.
function old new delta
colon 3848 3751 -97
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-97) Total: -97 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Improvements to ':read':
- When a file is read into the current buffer the cursor should be
placed on the first line read.
- If invoked without supplying a filename the current filename should
be used. This is similar to how ':edit' works.
- The code for ':edit' included an explicit check that the current
filename was non-empty. Both vim and traditional vi accept non-empty
filenames, only issuing an error message when an attempt to use such
a name fails.
- Allow undo of a file read.
function old new delta
file_insert 367 382 +15
colon 3841 3848 +7
.rodata 105236 105218 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-18) Total: 4 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a new file is opened from an existing editing session the
following details should be preserved:
- the last command used;
- the last character searched for on a line.
function old new delta
edit_file 849 835 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-14) Total: -14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When 'ZZ' was used to save the current file and more files were
available to edit BusyBox vi immediately moved on to the next file.
The correct behaviour is to issue a warning.
function old new delta
do_cmd 4673 4724 +51
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 51/0) Total: 51 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
