Remove baselayout-1 stuff
This commit is contained in:
parent
c22ccdf577
commit
db7b953460
@ -647,61 +647,61 @@
|
||||
# The PPP daemon has many options you can specify - although there are many
|
||||
# and may seem daunting, it is recommended that you read the pppd man page
|
||||
# before enabling any of them
|
||||
#pppd_ppp0=(
|
||||
# "maxfail 0" # WARNING: It's not recommended you use this
|
||||
#pppd_ppp0="
|
||||
# 'maxfail 0' # WARNING: It's not recommended you use this
|
||||
# # if you don't specify maxfail then we assume 0
|
||||
# "updetach" # If not set, "/etc/init.d/net.ppp0 start" will return
|
||||
# 'updetach' # If not set, "/etc/init.d/net.ppp0 start" will return
|
||||
# # immediately, without waiting the link to come up
|
||||
# # for the first time.
|
||||
# # Do not use it for dial-on-demand links!
|
||||
# "debug" # Enables syslog debugging
|
||||
# "noauth" # Do not require the peer to authenticate itself
|
||||
# "defaultroute" # Make this PPP interface the default route
|
||||
# "usepeerdns" # Use the DNS settings provided by PPP
|
||||
# 'debug' # Enables syslog debugging
|
||||
# 'noauth' # Do not require the peer to authenticate itself
|
||||
# 'defaultroute' # Make this PPP interface the default route
|
||||
# 'usepeerdns' # Use the DNS settings provided by PPP
|
||||
#
|
||||
# On demand options
|
||||
# "demand" # Enable dial on demand
|
||||
# "idle 30" # Link goes down after 30 seconds of inactivity
|
||||
# "10.112.112.112:10.112.112.113" # Phony IP addresses
|
||||
# "ipcp-accept-remote" # Accept the peers idea of remote address
|
||||
# "ipcp-accept-local" # Accept the peers idea of local address
|
||||
# "holdoff 3" # Wait 3 seconds after link dies before re-starting
|
||||
# 'demand' # Enable dial on demand
|
||||
# 'idle 30' # Link goes down after 30 seconds of inactivity
|
||||
# '10.112.112.112:10.112.112.113' # Phony IP addresses
|
||||
# 'ipcp-accept-remote' # Accept the peers idea of remote address
|
||||
# 'ipcp-accept-local' # Accept the peers idea of local address
|
||||
# 'holdoff 3' # Wait 3 seconds after link dies before re-starting
|
||||
#
|
||||
# Dead peer detection
|
||||
# "lcp-echo-interval 15" # Send a LCP echo every 15 seconds
|
||||
# "lcp-echo-failure 3" # Make peer dead after 3 consective
|
||||
# 'lcp-echo-interval 15' # Send a LCP echo every 15 seconds
|
||||
# 'lcp-echo-failure 3' # Make peer dead after 3 consective
|
||||
# # echo-requests
|
||||
#
|
||||
# Compression options - use these to completely disable compression
|
||||
# noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp
|
||||
#
|
||||
# Dial-up settings
|
||||
# "lock" # Lock serial port
|
||||
# "115200" # Set the serial port baud rate
|
||||
# "modem crtscts" # Enable hardware flow control
|
||||
# "192.168.0.1:192.168.0.2" # Local and remote IP addresses
|
||||
#)
|
||||
# 'lock' # Lock serial port
|
||||
# '115200' # Set the serial port baud rate
|
||||
# 'modem crtscts' # Enable hardware flow control
|
||||
# '192.168.0.1:192.168.0.2' # Local and remote IP addresses
|
||||
#"
|
||||
#
|
||||
# Dial-up PPP users need to specify at least one telephone number
|
||||
#phone_number_ppp0=( "12345689" ) # Maximum 2 phone numbers are supported
|
||||
# They will also need a chat script - here's a good one
|
||||
#chat_ppp0=(
|
||||
# 'ABORT' 'BUSY'
|
||||
# 'ABORT' 'ERROR'
|
||||
# 'ABORT' 'NO ANSWER'
|
||||
# 'ABORT' 'NO CARRIER'
|
||||
# 'ABORT' 'NO DIALTONE'
|
||||
# 'ABORT' 'Invalid Login'
|
||||
# 'ABORT' 'Login incorrect'
|
||||
# 'TIMEOUT' '5'
|
||||
# '' 'ATZ'
|
||||
# 'OK' 'AT' # Put your modem initialization string here
|
||||
# 'OK' 'ATDT\T'
|
||||
# 'TIMEOUT' '60'
|
||||
# 'CONNECT' ''
|
||||
# 'TIMEOUT' '5'
|
||||
# '~--' ''
|
||||
#)
|
||||
#chat_ppp0=" \
|
||||
# 'ABORT' 'BUSY' \
|
||||
# 'ABORT' 'ERROR' \
|
||||
# 'ABORT' 'NO ANSWER' \
|
||||
# 'ABORT' 'NO CARRIER' \
|
||||
# 'ABORT' 'NO DIALTONE' \
|
||||
# 'ABORT' 'Invalid Login' \
|
||||
# 'ABORT' 'Login incorrect' \
|
||||
# 'TIMEOUT' '5' \
|
||||
# '' 'ATZ' \
|
||||
# 'OK' 'AT' # Put your modem initialization string here \
|
||||
# 'OK' 'ATDT\T' \
|
||||
# 'TIMEOUT' '60' \
|
||||
# 'CONNECT' '' \
|
||||
# 'TIMEOUT' '5' \
|
||||
# '~--' '' \
|
||||
#"
|
||||
|
||||
# If the link require extra configuration - for example wireless or
|
||||
# RFC 268 bridge - we need to depend on the bridge so they get
|
||||
@ -1020,7 +1020,7 @@
|
||||
# # Enable Wake-On-LAN for every interface except for lo
|
||||
# # Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
|
||||
# # as well ;)
|
||||
# [[ ${IFACE} != "lo" ]] && ethtool -s "${IFACE}" wol g
|
||||
# [ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
|
||||
|
||||
# Automatically erase any ip rules created in the example postup above
|
||||
# if interface_exists "${IFACE}" ; then
|
||||
|
@ -439,9 +439,7 @@ iwconfig_scan() {
|
||||
i=$((${i} + 1))
|
||||
done
|
||||
|
||||
local i=0 e= m= black= s=
|
||||
eval "$(_get_array "blacklist_aps")"
|
||||
black="$@"
|
||||
local i=0 e= m= s=
|
||||
|
||||
while [ ${i} -le ${APS} ] ; do
|
||||
eval x=\$MAC_${i}
|
||||
@ -582,7 +580,7 @@ iwconfig_defaults() {
|
||||
}
|
||||
|
||||
iwconfig_configure() {
|
||||
local x APS
|
||||
local x= APS=
|
||||
eval SSID=\$ssid_${IFVAR}
|
||||
|
||||
# Support old variable
|
||||
@ -615,18 +613,16 @@ iwconfig_configure() {
|
||||
return 1
|
||||
fi
|
||||
|
||||
# Do we have a preferred Access Point list specific to the interface?
|
||||
# x="preferred_aps_${ifvar}[@]"
|
||||
# [[ -n ${!x} ]] && preferred_aps=( "${!x}" )
|
||||
eval x=\$preferred_aps_${IFVAR}
|
||||
[ -n "${x}" ] && preferred_aps=${x}
|
||||
|
||||
# # Do we have a blacklist Access Point list specific to the interface?
|
||||
# x="blacklist_aps_${ifvar}[@]"
|
||||
# [[ -n ${!x} ]] && blacklist_aps=( "${!x}" )
|
||||
eval x=\$blacklist_aps_${IFVAR}
|
||||
[ -n "${x}" ] && blacklist_aps=${x}
|
||||
|
||||
# Are we forcing preferred only?
|
||||
eval x=\$associate_order_${IFVAR}
|
||||
[ -n "${x}" ] && associate_order=${x}
|
||||
associate_order=${associate_order:-any}
|
||||
|
||||
if [ "${associate_order}" = "forcepreferredonly" ]; then
|
||||
iwconfig_force_preferred && return 0
|
||||
else
|
||||
|
Loading…
Reference in New Issue
Block a user