When the 'STARTED' field was added, in the message for
the commit referenced below, I explained why 'ELAPSED'
shouldn't be implemented though it might be preferred.
Well, after climbing out of my box to do a little more
thinking, I came up with the way to add that 'ELAPSED'
field while avoiding the possible performance penalty.
Just do not show what would change with every refresh!
If we do not show the seconds portion of a scaled tics
amount then the problem goes away. And this comes with
an additional benefit. The HH,MM (hours,minutes) style
then is readily compared with that system uptime shown
as HH:MM. The only difference is just the comma/colon.
[ assuming the top uptime/load average toggle was on ]
Reference(s):
. introduced 'start time' field
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the 'STARTED' field was added, the width was made
the same as the 'TIME+' field. Thus, a full time could
be shown (which then included hundredths of a second).
That kind of granularity is totally unnecessary. After
all, this column is potentially confusing enough since
it is so counterintuitive. So, this commit will reduce
the width of the field with some help from scale_tics.
Henceforth it will not include those ol' centiseconds.
[ along the way let's expand the man document with a ]
[ a remainder about content representation & scaling ]
Reference(s):
. introduced 'start time' field
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
While we really do not need the extra precision, we'll
trade that recently introduced float type for a double
for efficiency on a 64 bit platform. Additionally, the
UTILIZATION algorithm was tweaked producing less code.
The net result is four fewer machine instructions with
a reduction of 14 total bytes in that function's size.
Reference(s):
. introduced 'real' type & 'utilization' item
commit c69104b2b8
Signed-off-by: Jim Warner <james.warner@comcast.net>
The library refactored 'TIME' items for consistency so
we must adapt to some new data types and calculations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The library refactored 'TIME' items for consistency so
we must adapt to some new data types and calculations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The library refactored 'TIME' items for consistency so
we must adapt to some new data types and calculations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will exploit some new library capabilities.
[ one will raise eyebrows, the other likely will not ]
A new 'STARTED' field was added which shows the time a
process started after system boot. As such the largest
interval represents the most recently started process.
This is the field that will likely be questioned since
it's somewhat counterintuitive. But were we to instead
use TIME_ELAPSED, the value will change with every top
refresh. This will defeat any PUFF macro optimization.
The new '%CUU' field will probably be better received.
It represents the cpu usage over the life of the task.
When a process was showing high %CPU usage, this field
can be used to determine if it's an anomaly or normal.
[ and as with %CPU, %CUU shows a '?' when running in ]
[ a namespace when /proc was mounted with subset=pid ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit introduces some new capabilities available
in libproc-2 under the <PIDS> interface. Along the way
errors impacting some item values have been corrected.
The following summarizes the major changes being made.
1. The PIDS_TIME_START item was represented as seconds
since system boot but really held tics since boot. And
some programs properly divided it by Hertz to actually
yield seconds while others acted as if it already was.
So, now we have a new PIDS_TICS_BEGAN field and all of
the 'TIME' fields properly reflect seconds. With those
'TIME' fields, the type was changed to 'float/real' so
one could convert it back to tics without loss of some
centiseconds reflected in the Hertz guy (usually 100).
2. The boot_seconds was established in procps_pids_new
meaning it was fixed/unchanging. As a result, one item
(PIDS_TIME_ELAPSED) was rendered useless. So now, each
of the three retrieval functions establishes a current
boot_seconds well before the set functions are called.
3. Added a PIDS_UTILIZATION item that will provide the
CPU usage over the life of a process, as a percentage.
4. Added PIDS_TIME_ALL_C for symmetry with the similar
item called PIDS_TICS_ALL_C (which reflects raw tics).
5. That 'derived from' notation has been added to some
additional header items to reflect their true origins.
Signed-off-by: Jim Warner <james.warner@comcast.net>
. add the proper function names to the procps_pids man
page when discussing the 'LIBPROC_HIDE_KERNEL' feature
under recently added 'ENVIRONMENT VARIABLE(S)' section
. ensure the 'SEE ALSO' references are comma delimited
Signed-off-by: Jim Warner <james.warner@comcast.net>
The assignment was originally created to reduce length
of one line of code (i.e. for readability). But we can
achieve this objective without adding executable code.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was prompted by the merge request for pgrep
referenced below. In top's case, any performance gains
will be minimal since the now defunct strncpy was only
employed for termcap rebuilds after interacting with a
user (+ 1 other non-termcap related user interaction).
[ golly, strncpy always calls at least two functions ]
[ but usually calls a total of 3. on the other hand, ]
[ memccpy will only call a maximum of two functions. ]
And thanks to Baruch Siach for these strncpy insights.
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/148
Signed-off-by: Jim Warner <james.warner@comcast.net>
There was a potential problem with these macros should
that '#define SCROLLVAR_NO' be active and they were to
appear in an 'if' statement (like is necessary for the
master branch version of top under that EU_CMD label).
[ now they're always usable without requiring an ';' ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch eliminates those warnings referenced below.
They are sometimes associated with an obscure #define.
We'll also corrrect one header file function prototype
so it will aggree with the actual function definition.
Reference(s):
top.c: In function 'adj_geometry':
top.c:1874:20: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
1874 | if (Screen_cols < DOUBLE_limit) Curwin->rc.double_up = 0;
| ^
top.c: In function 'zap_fieldstab':
top.c:2359:26: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
2359 | if (wtab[EU_CPN].wmin < digits) {
| ^
top.c:2365:26: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
2365 | if (wtab[EU_NMA].wmin < digits) {
| ^
top.c: In function 'keys_summary':
top.c:5128:45: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
5128 | if (w->rc.double_up && Screen_cols < DOUBLE_limit) {
| ^
top.c: In function 'sum_tics':
top.c:5605:22: warning: unused variable 'num_syst' [-Wunused-variable]
5605 | int ix, num_user, num_syst;
| ^~~~~~~~
top.c:5605:12: warning: unused variable 'num_user' [-Wunused-variable]
5605 | int ix, num_user, num_syst;
| ^~~~~~~~
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'iokey' function's parameter 'action' was utilized
with literal numbers in the calling functions. So this
change will replace those literal numbers with #define
constants which, one hopes, will clarify their impact.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The previous commit used the value from mbstowcs() to work out
the spacing required, as printf() got it completely wrong.
However, for alignment of text you don't use the string length
but the string width.
As the referenced website says:
Use wcslen when allocating memory for wide characters, and use wcswidth to
align text.
Which is what free does now. Chinese is still off by one but I cannot
see why this is so. It's close enough for now. If someone can work
it out, I'd love to know what the fix is.
As a side effect, #213 is fixed because we are putting the correct
number of spaces in.
French is still an issue (see #24 ) but this is because the string is
too long!
References:
procps-ng/procps#24procps-ng/procps#213procps-ng/procps#229
commit 9f4db0fb56https://www.linux.com/news/programming-wide-characters/
Signed-off-by: Craig Small <csmall@dropbear.xyz>
free has for many years had a problem with translated header columns
or the first column. This is because printf("-9s", str) doesn't use
the wide length of the string but the char length meaning they are
mis-aligned.
Using the mbstowcs() function to get the wide length and then
a precision parameter to append the right number of spaces after the
number means we get what we need.
References:
procps-ng/procps#229procps-ng/procps#204procps-ng/procps#206https://bugs.debian.org/1001689
Signed-off-by: Craig Small <csmall@dropbear.xyz>
This patch began as just an attempt to make any option
which also included an argument a little more readable
by adding one space before the '=ARGUMENT' convention.
[ by the way, i don't agree with most of those other ]
[ procps-ng programs that use an '<arg>' convention. ]
[ it's too easily misread as an 'optional' argument. ]
[ top uses a convention like that found in coreutils ]
[ albeit now with one extra space before the equals. ]
In adjusting those arguments it was apparent that many
explanations already lined up nicely at the right hand
margin. So, this commit will force right-justification
with all explanations (as we do with commit messages).
[ and as a final challenge, for those options taking ]
[ an argument, that argument was repeated within the ]
[ explanation and made the rightmost item on a line. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When in forest view mode, that focus toggle ('F') is a
useful tool occasionally. But, if a focused parent has
enough cloned siblings to exceed screen rows, it could
be hard to remember that such a toggle remains active.
So, this patch will provide a subtle visual clue added
to the leftmost position in the COMMAND column. Now if
the focus toggle was active, regardless of total tasks
affected, the users will always know when it's active.
Reference(s):
. -7/24/21, introduced new focus toggle
commit 3e922e671d
. 09/23/21, ensure focused tasks stay focused
commit 69978e3650
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the commit referenced below, I fixed what I thought
was all the top 'truncation' warnings. For that commit
I had been using CFLAGS='-ggdb -Wall'. However, if one
uses just a vanilla './configure', then a hidden extra
warning will surface. This patch will finally kill it.
[ thanks a bunch gcc - we love this kind of behavior ]
Reference(s):
. 01/08/22, original warning fix
commit 44ca06f1a0
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ and in the affected function, we'll also eliminate ]
[ all those f**king tab characters making a hot mess ]
[ of any attempt at a properly formatted C function! ]
[ plus i adjusted a little non-tab misalignment too! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since gcc no longer warns of 'unreachable code', we'll
just deal with any such possibility ourselves I guess.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This started off with fixing the compilier warning:
proc/readproc.c: In function ‘simple_nextpid’:
proc/readproc.c:1373:38: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 58 [-Wformat-truncation=]
1373 | snprintf(path, PROCPATHLEN, "/proc/%s", ent->d_name);
| ^~
proc/readproc.c:1373:3: note: ‘snprintf’ output between 7 and 262 bytes into a destination of size 64
1373 | snprintf(path, PROCPATHLEN, "/proc/%s", ent->d_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We know that ent->d_name will fit under 64 bytes because we check the
name starts with a digit. The first change was simple and changed the
printf to use tgid like the task function below it.
Is everything under /proc that starts with a digit a directory with a
PID only? Today, it is but there are no guarantees.
The entire function works ok if every non-pid directory doesn't start
with a number. We don't check for strtoul() having an issue nor
if the for loop just falls off the end. The moment the kernel guys
(or some module writer) think "/proc/12mykernelval" is a neat idea this
function is in trouble. We won't get buffer overflow as we are
using snprintf at least.
This change now:
We check if strtoul() actually came across a number
Process the pid directory as a conditional branch
Treat falling off the for loop as a not-found
Signed-off-by: Craig Small <csmall@dropbear.xyz>
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
40 | __error_noreturn (__status, __errnum, __format, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pmap.c: In function ‘main’:
pmap.c:760:35: note: format string is defined here
760 | xerrx(EXIT_FAILURE, "%s: '%s'", _("failed to parse argument"), optarg);
A simple check for optarg being null silenced this, not sure why only
this one was a problem.
Signed-off-by: Craig Small <csmall@dropbear.xyz>
[ you wouldn't believe how many back-and-forths were ]
[ involved in Craig convincing me there were several ]
[ inconsistencies. i am so dense sometimes (often?). ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was prompted by Björn Fischer's merge #147
request referenced below. And since the library change
may impact all users, multiple man pages were updated.
[ and thanks to Björn for initiating this extension ]
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/147
Prototyped-by: Björn Fischer <bf@CeBiTec.Uni-Bielefeld.DE>
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was prompted by Björn Fischer's merge #147
request referenced below. It has been generalized such
that it now embraces both of those 'pids_fetch' types.
[ and thanks to Björn for initiating this extension ]
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/147
Prototyped-by: Björn Fischer <bf@CeBiTec.Uni-Bielefeld.DE>
Signed-off-by: Jim Warner <james.warner@comcast.net>
Over the years the summary_show function has increased
from around 77 lines of code & comments to its current
size of 243 lines. This is well beyond an ideal length
of available screen rows. So this patch will split it.
We'll take the cpu and memory duties and make separate
functions out of them. Of course, this will incur some
additional call overhead but, given current cpu/memory
logic, any such increase really becomes insignificant.
Now summary_show's a svelte 57 lines of code/comments.
[ this is like what was done to that do_key function ]
[ a decade ago except overhead of new function calls ]
[ plus table lookup was even less of a concern since ]
[ a human was involved, not normal iterative output. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the patch referenced below the focus task logic was
improved to ensure that newly cloned tasks 'above' the
focused task did not force an effect like the up arrow
key. That commit also acknowledged that when some task
'above' ended, it *would* act like the down arrow key.
Well, with this commit a task ending 'above' a focused
task no longer distorts the focus. That's assuming the
new '#define FOCUS_HARD_Y' is specified plus the total
focused tasks does not exceed the current screen rows.
Thus, the manual scrolling with up and down arrow keys
is allowed when the total focused exceeds screen rows.
[ but keep in mind that when a focused task has been ]
[ hardened some otherwise useful toggles will not be ]
[ available. keystrokes like 'v' and even 'F' itself ]
[ can not be applied to another task with no scroll. ]
Reference(s):
. Sep, 2021 - 'focus' logic improved
commit 69978e3650
Signed-off-by: Jim Warner <james.warner@comcast.net>
This just updates the copyright dates in the documents
where I was already represented. Others are unchanged.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As the issue cited below illustrates, a pids namespace
with proc mounted as subset=pid denies our library any
access to non-task data. In top's case, the result was
a fatal error message which involved "cpu statistics".
With this patch top will now assume an error involving
global cpu (stat) or memory (meminfo) data means we're
running under a restricted pids namespace. As such, an
attempt will be made to still display task level data.
[ if our assumption is incorrect, it's of no matter. ]
[ instead of a fatal error, we'll still try to offer ]
[ a user some minimally useful bit of functionality. ]
Reference(s):
https://gitlab.com/procps-ng/procps/-/issues/227https://www.freelists.org/post/procps/three-for-newlib,1
. 1st cut at subset=pid
commit bcb837b8c7
Signed-off-by: Jim Warner <james.warner@comcast.net>
For some unknown reason all the 'info' structures were
declared between macros and function prototypes rather
than right after all the other structure declarations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Not only does that library tweak help to simplify some
top code, but now that ps snprintf fmtstr will finally
be accurate. That is two birdies with a single pebble!
Signed-off-by: Jim Warner <james.warner@comcast.net>
