Use of these macros, apart from the benefits mentioned in the commit
that adds the macros, has some other good side effects:
- Consistency in getting the size of the object from sizeof(type),
instead of a mix of sizeof(type) sometimes and sizeof(*p) other
times.
- More readable code: no casts, and no sizeof(), so also shorter lines
that we don't need to cut.
- Consistency in using array allocation calls for allocations of arrays
of objects, even when the object size is 1.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This macros have several benefits over the standard functions:
- The type of the allocated object (not the pointer) is specified as an
argument, which improves readability:
- It is directly obvious what is the type of the object just by
reading the macro call.
- It allows grepping for all allocations of a given type.
This is admittedly similar to using sizeof() to get the size of the
object, but we'll see why this is better.
- In the case of reallocation macros, an extra check is performed to
make sure that the previous pointer was compatible with the allocated
type, which can avoid some mistakes.
- The cast is performed automatically, with a pointer type derived from
the type of the object. This is the best point of this macro, since
it does an automatic cast, where there's no chance of typos.
Usually, programmers have to decide whether to cast or not the result
of malloc(3). Casts usually hide warnings, so are to be avoided.
However, these functions already return a void *, so a cast doesn't
really add much danger. Moreover, a cast can even add warnings in
this exceptional case, if the type of the cast is different than the
type of the assigned pointer. Performing a manual cast is still not
perfect, since there are chances that a mistake will be done, and
even ignoring accidents, they clutter code, hurting readability.
And now we have a cast that is synced with sizeof.
- Whenever the type of the object changes, since we perform an explicit
cast to the old type, there will be a warning due to type mismatch in
the assignment, so we'll be able to see all lines that are affected
by such a change. This is especially important, since changing the
type of a variable and missing to update an allocation call far away
from the declaration is easy, and the consequences can be quite bad.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We'll expand the contents in a following commit, so let's move the file
to a more generic name, have a dedicated header, and update includes.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use the new header for xstrdup()
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This is guaranteed by ISO C. Now that we require ISO C (and even POSIX)
to compile, we can simplify this code.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
On 2/19/23 18:09, David Mudrich wrote:
> I am working on a RAM based Linux OS from source, and try to use
> latest versions of all software. I found shadow needs libbsd's
> readpassphrase(3) as superior alternative to getpass(3). While
> considering if I a) include libbsd, or include libbsd's code of
> readpassphrase(3) into shadow, found, that libbsd's readpassphrase(3)
> never returns \n or \r
> <https://cgit.freedesktop.org/libbsd/tree/src/readpassphrase.c>
> line 122, while agetpass() uses a check for \n in agetpass.c line 108.
> I assume it always fails.
Indeed, it always failed. I made a mistake when writing agetpass(),
assuming that readpassphrase(3) would keep newlines.
>
> I propose a check of len == PASS_MAX - 1, with false positive error for
> exactly PASS_MAX - 1 long passwords.
Instead, I added an extra byte to the allocation to allow a maximum
password length of PASS_MAX (which is the maximum for getpass(3), which
we're replacing.
While doing that, I notice that my previous implementation also had
another bug (minor): The maximum password length was PASS_MAX - 1
instead of PASS_MAX. That's also fixed in this commit.
Reported-by: David Mudrich <dmudrich@gmx.de>
Fixes: 155c9421b9 ("libmisc: agetpass(), erase_pass(): Add functions for getting passwords safely")
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Some programs don't support `(uint16_t) -1` or `(uint32_t) -1` as user
or group IDs. This is because `-1` is used as an error code or as an
unspecified ID, e.g. in `chown(2)` parameters, and in the past, `gid_t`
and `uid_t` have changed width. For legacy reasons, those values have
been kept reserved in programs today (for example systemd does this; see
the documentation in the link below).
This should not be confused with catching overflow in the ID values,
since that is already caught by our ERANGE checks. This is about not
using reserved values that have been reserved for legacy reasons.
Link: <https://systemd.io/UIDS-GIDS/>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These comments should indicate which functions they really wrap.
An alternative would be to remove the line completely to avoid
future copy&paste mistakes.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
This function simplifies the calculation of the bounds of the buffer for
catenating strings. It would also reduce error checking, but we don't
care about truncation in this specific code. :)
Signed-off-by: Alejandro Colomar <alx@kernel.org>
strncat(3), strlcpy(3), and many other functions are often misused for
catenating strings, when they should never be used for that. strlcat(3)
is good. However, there's no equivalent to strlcat(3) similar to
snprintf(3). Let's add stpecpy(), which is similar to strlcat(3), but
it is also the only function compatible with stpeprintf(), which makes
it more useful than strlcat(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
All the string-copying functions called above do terminate the strings
they create with a NUL byte. Writing it again at the end of the buffer
is unnecessary paranoid code. Let's remove it.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
This function allows reducing error checking (since errors are
propagated across chained calls), and also simplifies the calculation of
the start and end of the buffer where the string should be written.
Moreover, the new code is more optimized, since many calls to strlen(3)
have been removed.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
[v]stpeprintf() are similar to [v]snprintf(3), but they allow chaining.
[v]snprintf(3) are very dangerous for catenating strings, since the
obvious ways to do it invoke Undefined Behavior, and the ways that avoid
UB are very error-prone.
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
When trying to build shadow in a different directory I stumbled upon few
issues, this commit aims to fix all of them:
- The `subid.h` file is generated and hence in the build directory and
not in the source directory, so use `$(builddir)` instead of
`$(srcdir)`.
- Using `$<` instead of filenames utilises autotools to locate the files
in either the source or build directory automatically.
- `xsltproc` needs to access the files in login.defs.d in either the
source directory or the symlink in a language subdirectory, but it
does not interpret the `--path` as prefix of the entity path, but
rather a path under which to locate the basename of the entity
from the XML file. So specify the whole path to login.defs.d.
- The above point could be used to make the symlinks of login.defs.d
and entity path specifications in the XMLs obsolete, but I trying
not to propose possibly disrupting patches, so for the sake of
simplicity just specify `$(srcdir)` when creating the symlink.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The intention of the code is just to not report an error message when
'typefile' doesn't exist. If we call access(2) and then fopen(2),
there's a race. It's not a huge problem, and the worst thing that can
happen is reporting an error when the file has been removed after
access(2). It's not a problem, but we can fix the race and at the same
time clarify the intention of not warning about ENOENT and also remove
one syscall. Seems like a win-win.
Suggested-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Every non-const pointer converts automatically to void *.
- Every pointer converts automatically to void *.
- void * converts to any other pointer.
- const void * converts to any other const pointer.
- Integer variables convert to each other.
I changed the declaration of a few variables in order to allow removing
a cast.
However, I didn't attempt to edit casts inside comparisons, since they
are very delicate. I also kept casts in variadic functions, since they
are necessary, and in allocation functions, because I have other plans
for them.
I also changed a few casts to int that are better as ptrdiff_t.
This change has triggered some warnings about const correctness issues,
which have also been fixed in this patch (see for example src/login.c).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We could use the standard (C11) _Noreturn qualifier, but it will be
deprecated in C23, and replaced by C++'s [[noreturn]], which is
compatible with the GCC attribute, so let's directly use the attribute,
and in the future we'll be able to switch to [[]].
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Recently, we removed support for 'struct utmpx'. We did it because utmp
and utmpx are identical, and while POSIX specifies utmpx (and not utmp),
GNU/Linux documentation seems to favor utmp. Also, this project
defaulted to utmp, so changing to utmpx would be more dangerous than
keeping old defaults, even if it's supposed to be the same.
Now, I just found more code that didn't make much sense: lib/utent.c
provides definitions for getutent(3) and friends in case the system
doesn't provide them, but we don't provide prototypes for those
definitions, so code using the functions would have never compiled.
Let's just remove these definitions as dead code.
Fixes: 3be7b9d75a ("Remove traces of utmpx")
Fixes: 170b76cdd1 ("Disable utmpx permanently")
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Closes#457
The existing prose was confusing, or simply wrong. Make it clear
that only the group ownership of the tty is affected, and how.
Also move the paragraph about defaults after the discussion of
acceptable TTYGROUPs, as this seems more natural.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
In variadic functions we still do the cast. In POSIX, it's not
necessary, since NULL is required to be of type 'void *', and 'void *'
is guaranteed to have the same alignment and representation as 'char *'.
However, since ISO C still doesn't mandate that, and moreover they're
doing dubious stuff by adding nullptr, let's be on the cautious side.
Also, C++ requires that NULL is _not_ 'void *', but either plain 0 or
some magic stuff.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
If lines start with '\0' then it is possible to trigger out of
boundary accesses.
Check if indices are valid before accessing them.
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
If the file referenced by ENV_TZ has a zero length string, then an out
of boundary write occurs. Also the result can be wrong because it is
assumed that the file will always end with a newline.
Only override a newline character with '\0' to avoid these cases.
This cannot be considered to be security relevant because login.defs
and its contained references to system files should be trusted to begin
with.
Proof of Concept:
1. Compile shadow's su with address sanitizer and --without-libpam
2. Setup your /etc/login.defs to contain ENV_TZ=/etc/tzname
3. Prepare /etc/tzname to contain a '\0' byte at the beginning
`python -c "print('\x00')" > /etc/tzname`
4. Use su
`su -l`
You can see the following output:
`tz.c:45:8: runtime error: index 18446744073709551615 out of bounds for type 'char [8192]'`
Signed-off-by: Samanta Navarro <ferivoz@riseup.net>
__int128, which is needed for optimizing that part of the range, is not
always available. We need the unoptimized version for portability
reasons.
Closes: <https://github.com/shadow-maint/shadow/issues/634>
Fixes: 1a0e13f94e ("Optimize csrand_uniform()")
Reported-by: Adam Sampson <ats@offog.org>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
We do need the unoptimized version of csrand_uniform() for high values
of `n`, since the optimized version depends on having __int128, and it's
not available on several platforms, including ARMv7, IA32, and MK68k.
This reverts commit 848f53c1d3c1362c86d3baab6906e1e4419d2634; however,
I applied some tweaks to the reverted commit.
Reported-by: Adam Sampson <ats@offog.org>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Now that we optimized csrand_uniform(), we don't need these functions.
This reverts commit 7c8fe291b1260e127c10562bfd7616961013730f.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use a different algorithm to minimize rejection. This is essentially
the same algorithm implemented in the Linux kernel for
__get_random_u32_below(), but written in a more readable way, and
avoiding microopimizations that make it less readable.
Which (the Linux kernel implementation) is itself based on Daniel
Lemire's algorithm from "Fast Random Integer Generation in an Interval",
linked below. However, I couldn't really understand that paper very
much, so I had to reconstruct the proofs from scratch, just from what I
could understand from the Linux kernel implementation source code.
I constructed some graphical explanation of how it works, and why it
is optimal, because I needed to visualize it to understand it. It is
published in the GitHub pull request linked below.
Here goes a wordy explanation of why this algorithm based on
multiplication is better optimized than my original implementation based
on masking.
masking:
It discards the extra bits of entropy that are not necessary for
this operation. This works as if dividing the entire space of
possible csrand() values into smaller spaces of a size that is
a smaller power of 2. Each of those smaller spaces has a
rejection band, so we get as many rejection bands as spaces
there are. For smaller values of 'n', the size of each
rejection band is smaller, but having more rejection bands
compensates for this, and results in the same inefficiency as
for large values of 'n'.
multiplication:
It divides the entire space of possible random numbers in
chunks of size exactly 'n', so that there is only one rejection
band that is the remainder of `2^64 % n`. The worst case is
still similar to the masking algorithm, a rejection band that is
almost half the entire space (n = 2^63 + 1), but for lower
values of 'n', by only having one small rejection band, it is
much faster than the masking algorithm.
This algorithm, however, has one caveat: the implementation
is harder to read, since it relies on several bitwise tricky
operations to perform operations like `2^64 % n`, `mult % 2^64`,
and `mult / 2^64`. And those operations are different depending
on the number of bits of the maximum possible random number
generated by the function. This means that while this algorithm
could also be applied to get uniform random numbers in the range
[0, n-1] quickly from a function like rand(3), which only
produces 31 bits of (non-CS) random numbers, it would need to be
implemented differently. However, that's not a concern for us,
it's just a note so that nobody picks this code and expects it
to just work with rand(3) (which BTW I tried for testing it, and
got a bit confused until I realized this).
Finally, here's some light testing of this implementation, just to know
that I didn't goof it. I pasted this function into a standalone
program, and run it many times to find if it has any bias (I tested also
to see how many iterations it performs, and it's also almost always 1,
but that test is big enough to not paste it here).
int main(int argc, char *argv[])
{
printf("%lu\n", csrand_uniform(atoi(argv[1])));
}
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
341
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
339
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 1 | wc -l
338
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
336
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
328
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 2 | wc -l
335
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
332
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
331
$ seq 1 1000 | while read _; do ./a.out 3; done | grep 0 | wc -l
327
This isn't a complete test for a cryptographically-secure random number
generator, of course, but I leave that for interested parties.
Link: <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e9a688bcb19348862afe30d7c85bc37c4c293471>
Link: <https://github.com/shadow-maint/shadow/pull/624#discussion_r1059574358>
Link: <https://arxiv.org/abs/1805.10941>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Björn Esser <besser82@fedoraproject.org>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Sam James <sam@gentoo.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Iker Pedrosa <ipedrosa@redhat.com>
[Daniel Lemire: Added link to research paper in source code]
Cc: Daniel Lemire <daniel@lemire.me>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
