It is Undefined Behavior to declare errno (see NOTES in its manual page).
Instead of using the errno dummy declaration, use one that doesn't need
a comment.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Previous commits, to keep readability of the diffs, left the code that
was previously wrapped by preprocessor coditionals untouched. Apply
some minor cosmetic changes to merge it in the surrounding code.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
On Linux, utmpx and utmp are identical. However, documentation (manual
pages) covers utmp, and just says about utmpx that it's identical to
utmp. It seems that it's preferred to use utmp, at least by reading the
manual pages.
Moreover, we were defaulting to utmp (utmpx had to be explicitly enabled
at configuration time). So, it seems safer to just make it permanent,
which should not affect default builds.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The OSes that are referred to by these comments, are extinct, but
their comments survived, fossilized in amber.
Reported-by: Iker Pedrosa <ipedrosa@redhat.com>
Cc: Christian Göttsche <cgzones@googlemail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
All of the macros we're using are required by POSIX.1-2001.
Cc: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The function is obsolete. It is recommended to use getrlimit(2) instead
(see the manual page for ulimit(3) or the POSIX manual for it). Since
getrlimit(2) is required by POSIX.1-2001, we can rely on it.
Cc: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There are several issues with getpass(3).
Many implementations of it share the same issues that the infamous
gets(3). In glibc it's not so terrible, since it's a wrapper
around getline(3). But it still has an important bug:
If the password is long enough, getline(3) will realloc(3) memory,
and prefixes of the password will be laying around in some
deallocated memory.
See the getpass(3) manual page for more details, and especially
the commit that marked it as deprecated, which links to a long
discussion in the linux-man@ mailing list.
So, readpassphrase(3bsd) is preferrable, which is provided by
libbsd on GNU systems. However, using readpassphrase(3) directly
is a bit verbose, so we can write our own wrapper with a simpler
interface similar to that of getpass(3).
One of the benefits of writing our own interface around
readpassphrase(3) is that we can hide there any checks that should
be done always and which would be error-prone to repeat every
time. For example, check that there was no truncation in the
password.
Also, use malloc(3) to get the buffer, instead of using a global
buffer. We're not using a multithreaded program (and it wouldn't
make sense to do so), but it's nice to know that the visibility of
our passwords is as limited as possible.
erase_pass() is a clean-up function that handles all clean-up
correctly, including zeroing the entire buffer, and then
free(3)ing the memory. By using [[gnu::malloc(erase_pass)]], we
make sure that we don't leak the buffers in any case, since the
compiler will be able to enforce clean up.
Link: <https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit?id=7ca189099d73bde954eed2d7fc21732bcc8ddc6b>
Reported-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The minimum id allocation for system accounts shouldn't be 0 as this is
reserved for root.
Signed-off-by: Tomáš Mráz <tm@t8m.info>
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
glibc, musl, FreeBSD, and OpenBSD define the MAX() and MIN()
macros in <sys/param.h> with the same definition that we use.
Let's not redefine it here and use the system one, as it's
effectively the same as we define (modulo whitespace).
See:
shadow (previously):
alx@asus5775:~/src/shadow/shadow$ grepc -ktm MAX
./lib/defines.h:318:#define MAX(x,y) (((x) > (y)) ? (x) : (y))
glibc:
alx@asus5775:~/src/gnu/glibc$ grepc -ktm -x 'sys/param.h$' MAX
./misc/sys/param.h:103:#define MAX(a,b) (((a)>(b))?(a):(b))
musl:
alx@asus5775:~/src/musl/musl$ grepc -ktm -x 'sys/param.h$' MAX
./include/sys/param.h:19:#define MAX(a,b) (((a)>(b))?(a):(b))
OpenBSD:
alx@asus5775:~/src/bsd/openbsd/src$ grepc -ktm -x 'sys/param.h$' MAX
./sys/sys/param.h:193:#define MAX(a,b) (((a)>(b))?(a):(b))
FreeBSD:
alx@asus5775:~/src/bsd/freebsd/freebsd-src$ grepc -ktm -x 'sys/param.h$' MAX
./sys/sys/param.h:333:#define MAX(a,b) (((a)>(b))?(a):(b))
Signed-off-by: Alejandro Colomar <alx@kernel.org>
free(3) accepts NULL, since the oldest ISO C. I guess the
paranoid code was taking care of prehistoric implementations of
free(3). I've never known of an implementation that doesn't
conform to this, so let's simplify this.
Remove xfree(3), which was effectively an equivalent of free(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
The setuid, setgid, and sticky bits are not copied during copy_tree.
Also start with very restrictive permissions before setting ownerships.
This prevents situations in which users in a group with less permissions
than others could win a race in opening the file before permissions are
removed again.
Proof of concept:
$ echo $HOME
/home/uwu
$ install -o uwu -g fandom -m 604 /dev/null /home/uwu/owo
$ ls -l /home/uwu/owo
-rw----r-- 1 uwu fandom 0 Sep 4 00:00 /home/uwu/owo
If /tmp is on another filesystem, then "usermod -md /tmp/uwu uwu" leads
to this temporary situation:
$ ls -l /tmp/uwu/owo
-rw----r-- 1 root root 0 Sep 4 00:00 /tmp/uwu/owo
This means that between openat and chownat_if_needed a user of group
fandom could open /tmp/uwu/owo and read the content when it is finally
written into the file.
Fixes regression introduced in faeab50e71.
If a directory contains fifos, then openat blocks until the other side
of the fifo is connected as well.
This means that users can prevent "usermod -m" from completing if their
home directories contain at least one fifo.
The groupadd from shadow does not allow upper case group names, the
same is true for the upstream shadow. But distributions like
Debian/Ubuntu/CentOS has their own way to cope with this problem,
this patch is picked up from Fedora [1] to relax the usernames
restrictions to allow the upper case group names, and the relaxation is
POSIX compliant because POSIX indicate that usernames are composed of
characters from the portable filename character set [A-Za-z0-9._-].
[1] https://src.fedoraproject.org/rpms/shadow-utils/blob/rawhide/f/shadow-4.8-goodname.patch
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Introduce a path_info struct with the full path and dirfd and name
information for *at() functions, since the full path is needed for link
resolution, SELinux label lookup and ACL attributes.
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Use *at() functions to pin the directory operating in to avoid being
redirected by unprivileged users replacing parts of paths by symlinks to
privileged files.
Allow the compiler to verify the format string against the supplied
arguments.
chage.c:239:51: warning: format not a string literal, format string not checked [-Wformat-nonliteral]
239 | (void) strftime (buf, sizeof buf, format, tp);
| ^~~~~~
salt.c:102:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
102 | static /*@observer@*/const unsigned long SHA_get_salt_rounds (/*@null@*/int *prefered_rounds);
| ^~~~~
salt.c:110:22: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
110 | static /*@observer@*/const unsigned long YESCRYPT_get_salt_cost (/*@null@*/int *prefered_cost);
| ^~~~~
subordinateio.c:160:8: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
160 | static const bool range_exists(struct commonio_db *db, const char *owner)
| ^~~~~
Compilers are free to ignore the indented hint and modern optimizations
should create good code by themself.
(As such it is for example deprecated in C++17.)
On systems with Linux kernel < 3.17, getentropy() and getrandom() may
exist but return ENOSYS. Use /dev/urandom as a fallback to avoid a hard
requirement on Linux kernel version.
Fixes#512.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
In order to remove some of the FIXMEs it was necessary to change the
code and call getulong() instead of getlong().
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
C89 and POSIX.1-2001 define signal(2) as returning a pointer to a
function returning 'void'. K&R C signal(2) signature is obsolete.
Use 'void' directly.
Also, instead of writing the function pointer type explicitly, use
POSIX's 'sighandler_t'.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
nss_init() does not modify its path argument, thus declare it const.
Also drop superfluous prototype.
nss.c:54:31: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
54 | nsswitch_path = NSSWITCH;
| ^
Function declarations with no argument declare functions taking an
arbitrary number of arguments. Use the special type void to declare
functions taking no argument.
C89 defined isdigit as a function that tests for any decimal-digit
character, defining the decimal digits as 0 1 2 3 4 5 6 7 8 9.
I don't own a copy of C89 to check, but check in C17:
7.4.1.5
5.2.1
More specifically:
> In both the source and execution basic character sets, the value
> of each character after 0 in the above list of decimal digits
> shall be one greater than the value of the previous.
And since in ascii(7), the character after '9' is ':', it's highly
unlikely that any implementation will ever accept any
_decimal digit_ other than 0..9.
POSIX simply defers to the ISO C standard.
This is exactly what we wanted from ISDIGIT(c), so just use it.
Non-standard implementations might have been slower or considered
other characters as digits in the past, but let's assume
implementations available today conform to ISO C89.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
It wasn't being used at all. Let's remove it.
Use isdigit(3) directly in comments that referenced it.
Also, in those comments, remove an outdated reference to the fact
that ISDIGIT_LOCALE(c) might evaluate its argument more than once,
which could be true a few commits ago, until
IN_CTYPE_DEFINITION(c) was removed. Previously, the definition
for ISDIGIT_LOCALE(c) was:
#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
# define IN_CTYPE_DOMAIN(c) 1
#else
# define IN_CTYPE_DOMAIN(c) isascii(c)
#endif
#define ISDIGIT_LOCALE(c) (IN_CTYPE_DOMAIN (c) && isdigit (c))
Which could evaluate 'c' twice on pre-C89 systems (which I hope
don't exist nowadays).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Due to the recent removal of IN_CTYPE_DOMAIN(), the uppercase
macros that wrapped these standard calls are now defined to be
equivalent. Therefore, there's no need for the wrappers, and it
is much more readable to use the standard calls directly.
However, hold on with ISDIGIT*(), since it's not so obvious what
to do with it.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The recent removal of STDC_HEADERS made IN_CTYPE_DOMAIN be defined
to 1 unconditionally. Remove the now unnecessary definition, and
propagate its truthness to expressions where it was used.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
We're in 2021. C89 is everywhere; in fact, there are many other
assumptions in the code that wouldn't probably hold on
pre-standard C environments. Let's simplify and assume that C89
is available.
The specific assumptions are that:
- <string.h>, and <stdlib.h> are available
- strchr(3), strrchr(3), and strtok(3) are available
- isalpha(3), isspace(3), isdigit(3), and isupper(3) are available
I think we can safely assume we have all of those.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
memcpy(3) has been in standard C since C89. It is also in
POSIX.1-2001, in SVr4, and in 4.3BSD (see memcpy(3) and memcpy(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
strftime(3) has been in standard C since C89. It is also in
POSIX.1-2001, and in SVr4 (see strftime(3) and strftime(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
PARAMETERS:
According to the C2x charter, I reordered the parameters 'size'
and 'buf' from previously existing date_to_str() definitions.
C2x charter:
> 15. Application Programming Interfaces (APIs) should be
> self-documenting when possible. In particular, the order of
> parameters in function declarations should be arranged such that
> the size of an array appears before the array. The purpose is to
> allow Variable-Length Array (VLA) notation to be used. This not
> only makes the code's purpose clearer to human readers, but also
> makes static analysis easier. Any new APIs added to the Standard
> should take this into consideration.
I used 'long' for the date parameter, as some uses of the function
need to pass a negative value meaning "never".
FUNCTION BODY:
I didn't check '#ifdef HAVE_STRFTIME', which old definitions did,
since strftime(3) is guaranteed by the C89 standard, and all of
the conversion specifiers that we use are also specified by that
standard, so we don't need any extensions at all.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
When using groupdel with a prefix, groupdel will attempt to read a
passwd file to look for any user in the group. When the file does not
exist it cores with segmentation fault.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1986111
If a line in hushlogins file, e.g. /etc/hushlogins, starts with
'\0', then current code performs an out of boundary write.
If the line lacks a newline at the end, then another character is
overridden.
With strcspn both cases are solved.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
If SHA_CRYPT_MIN_ROUNDS and SHA_CRYPT_MAX_ROUNDS are both unspecified,
use SHA_ROUNDS_DEFAULT.
Previously, the code fell through, calling shadow_random(-1, -1). This
ultimately set rounds = (unsigned long) -1, which ends up being a very
large number! This then got capped to SHA_ROUNDS_MAX later in the
function.
The new behavior matches BCRYPT_get_salt_rounds().
Bug: https://bugs.gentoo.org/808195
Fixes: https://github.com/shadow-maint/shadow/issues/393
There's a better way to do this, and I hope to clean that up,
but this fixes out of tree builds for me right now.
Closes#386
Signed-off-by: Serge Hallyn <serge@hallyn.com>
In 9eb191edc4 I included a free() that
frees the members variable, which in turn causes the comma_to_list()
function to return an array of empty elements. The array variable holds
a list of pointers that point to offsets of the members variable. When
the function succeeds freeing members variable causes the elements of
the array variable to point to an empty string.
This is causing several regressions in our internal testing environment.
So, I'm reverting the change.
Signed-off-by: Iker Pedrosa <ipedrosa@redhat.com>
Most Linux distributions, including Fedora and RHEL 8, are shipping
with libxcrypt >= 4.0.
Since that version of libxcrypt the provided family of crypt_gensalt()
functions are able to use automatic entropy drawn from secure system
ressources, like arc4random(), getentropy() or getrandom().
Anyways, the settings generated by crypt_gensalt() are always
guaranteed to works with the crypt() function.
Using crypt_gensalt() is also needed to make proper use of newer
hashing methods, like yescrypt, provided by libxcrypt.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
In a previous commit we introduced /dev/urandom as a source to obtain
random bytes from. This may not be available on all systems, or when
operating inside of a chroot.
Almost all systems provide functions to obtain random bytes from
secure system ressources. Thus we should prefer to use these, and
fall back to /dev/urandom, if there is no such function present, as
a last resort.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
Error: RESOURCE_LEAK (CWE-772): [#def1]
shadow-4.8.1/lib/commonio.c:320: alloc_fn: Storage is returned from allocation function "fopen_set_perms".
shadow-4.8.1/lib/commonio.c:320: var_assign: Assigning: "bkfp" = storage returned from "fopen_set_perms(backup, "w", &sb)".
shadow-4.8.1/lib/commonio.c:329: noescape: Resource "bkfp" is not freed or pointed-to in "putc".
shadow-4.8.1/lib/commonio.c:334: noescape: Resource "bkfp" is not freed or pointed-to in "fflush".
shadow-4.8.1/lib/commonio.c:339: noescape: Resource "bkfp" is not freed or pointed-to in "fileno".
shadow-4.8.1/lib/commonio.c:342: leaked_storage: Variable "bkfp" going out of scope leaks the storage it points to.
340| || (fclose (bkfp) != 0)) {
341| /* FIXME: unlink the backup file? */
342|-> return -1;
343| }
344|
Error: RESOURCE_LEAK (CWE-772): [#def2]
shadow-4.8.1/libmisc/addgrps.c:69: alloc_fn: Storage is returned from allocation function "malloc".
shadow-4.8.1/libmisc/addgrps.c:69: var_assign: Assigning: "grouplist" = storage returned from "malloc(i * 4UL)".
shadow-4.8.1/libmisc/addgrps.c:73: noescape: Resource "grouplist" is not freed or pointed-to in "getgroups". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/libmisc/addgrps.c:126: leaked_storage: Variable "grouplist" going out of scope leaks the storage it points to.
124| }
125|
126|-> return 0;
127| }
128| #else /* HAVE_SETGROUPS && !USE_PAM */
Error: RESOURCE_LEAK (CWE-772): [#def3]
shadow-4.8.1/libmisc/chowntty.c:62: alloc_fn: Storage is returned from allocation function "getgr_nam_gid".
shadow-4.8.1/libmisc/chowntty.c:62: var_assign: Assigning: "grent" = storage returned from "getgr_nam_gid(getdef_str("TTYGROUP"))".
shadow-4.8.1/libmisc/chowntty.c:98: leaked_storage: Variable "grent" going out of scope leaks the storage it points to.
96| */
97| #endif
98|-> }
99|
Error: RESOURCE_LEAK (CWE-772): [#def4]
shadow-4.8.1/libmisc/copydir.c:742: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/libmisc/copydir.c:742: var_assign: Assigning: "ifd" = handle returned from "open(src, 0)".
shadow-4.8.1/libmisc/copydir.c:748: leaked_handle: Handle variable "ifd" going out of scope leaks the handle.
746| #ifdef WITH_SELINUX
747| if (set_selinux_file_context (dst, NULL) != 0) {
748|-> return -1;
749| }
750| #endif /* WITH_SELINUX */
Error: RESOURCE_LEAK (CWE-772): [#def5]
shadow-4.8.1/libmisc/copydir.c:751: open_fn: Returning handle opened by "open". [Note: The source code implementation of the function has been overridden by a user model.]
shadow-4.8.1/libmisc/copydir.c:751: var_assign: Assigning: "ofd" = handle returned from "open(dst, 577, statp->st_mode & 0xfffU)".
shadow-4.8.1/libmisc/copydir.c:752: noescape: Resource "ofd" is not freed or pointed-to in "fchown_if_needed".
shadow-4.8.1/libmisc/copydir.c:775: leaked_handle: Handle variable "ofd" going out of scope leaks the handle.
773| ) {
774| (void) close (ifd);
775|-> return -1;
776| }
777|
Error: RESOURCE_LEAK (CWE-772): [#def7]
shadow-4.8.1/libmisc/idmapping.c:188: alloc_fn: Storage is returned from allocation function "xmalloc".
shadow-4.8.1/libmisc/idmapping.c:188: var_assign: Assigning: "buf" = storage returned from "xmalloc(bufsize)".
shadow-4.8.1/libmisc/idmapping.c:188: var_assign: Assigning: "pos" = "buf".
shadow-4.8.1/libmisc/idmapping.c:213: noescape: Resource "buf" is not freed or pointed-to in "write".
shadow-4.8.1/libmisc/idmapping.c:219: leaked_storage: Variable "pos" going out of scope leaks the storage it points to.
shadow-4.8.1/libmisc/idmapping.c:219: leaked_storage: Variable "buf" going out of scope leaks the storage it points to.
217| }
218| close(fd);
219|-> }
Error: RESOURCE_LEAK (CWE-772): [#def8]
shadow-4.8.1/libmisc/list.c:211: alloc_fn: Storage is returned from allocation function "xstrdup".
shadow-4.8.1/libmisc/list.c:211: var_assign: Assigning: "members" = storage returned from "xstrdup(comma)".
shadow-4.8.1/libmisc/list.c:217: var_assign: Assigning: "cp" = "members".
shadow-4.8.1/libmisc/list.c:218: noescape: Resource "cp" is not freed or pointed-to in "strchr".
shadow-4.8.1/libmisc/list.c:244: leaked_storage: Variable "cp" going out of scope leaks the storage it points to.
shadow-4.8.1/libmisc/list.c:244: leaked_storage: Variable "members" going out of scope leaks the storage it points to.
242| if ('\0' == *members) {
243| *array = (char *) 0;
244|-> return array;
245| }
246|
Error: RESOURCE_LEAK (CWE-772): [#def11]
shadow-4.8.1/libmisc/myname.c:61: alloc_fn: Storage is returned from allocation function "xgetpwnam".
shadow-4.8.1/libmisc/myname.c:61: var_assign: Assigning: "pw" = storage returned from "xgetpwnam(cp)".
shadow-4.8.1/libmisc/myname.c:67: leaked_storage: Variable "pw" going out of scope leaks the storage it points to.
65| }
66|
67|-> return xgetpwuid (ruid);
68| }
69|
Error: RESOURCE_LEAK (CWE-772): [#def12]
shadow-4.8.1/libmisc/user_busy.c:260: alloc_fn: Storage is returned from allocation function "opendir".
shadow-4.8.1/libmisc/user_busy.c:260: var_assign: Assigning: "task_dir" = storage returned from "opendir(task_path)".
shadow-4.8.1/libmisc/user_busy.c:262: noescape: Resource "task_dir" is not freed or pointed-to in "readdir".
shadow-4.8.1/libmisc/user_busy.c:278: leaked_storage: Variable "task_dir" going out of scope leaks the storage it points to.
276| _("%s: user %s is currently used by process %d\n"),
277| Prog, name, pid);
278|-> return 1;
279| }
280| }
Error: RESOURCE_LEAK (CWE-772): [#def20]
shadow-4.8.1/src/newgrp.c:162: alloc_fn: Storage is returned from allocation function "xgetspnam".
shadow-4.8.1/src/newgrp.c:162: var_assign: Assigning: "spwd" = storage returned from "xgetspnam(pwd->pw_name)".
shadow-4.8.1/src/newgrp.c:234: leaked_storage: Variable "spwd" going out of scope leaks the storage it points to.
232| }
233|
234|-> return;
235|
236| failure:
Error: RESOURCE_LEAK (CWE-772): [#def21]
shadow-4.8.1/src/passwd.c:530: alloc_fn: Storage is returned from allocation function "xstrdup".
shadow-4.8.1/src/passwd.c:530: var_assign: Assigning: "cp" = storage returned from "xstrdup(crypt_passwd)".
shadow-4.8.1/src/passwd.c:551: noescape: Resource "cp" is not freed or pointed-to in "strlen".
shadow-4.8.1/src/passwd.c:554: noescape: Resource "cp" is not freed or pointed-to in "strcat". [Note: The source code implementation of the function has been overridden by a builtin model.]
shadow-4.8.1/src/passwd.c:555: overwrite_var: Overwriting "cp" in "cp = newpw" leaks the storage that "cp" points to.
553| strcpy (newpw, "!");
554| strcat (newpw, cp);
555|-> cp = newpw;
556| }
557| return cp;
Using the random() function to obtain pseudo-random bytes
for generating salt strings is considered to be dangerous.
See CWE-327.
We really should use a more reliable source for obtaining
pseudo-random bytes like /dev/urandom.
Fixes#376.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
In the previous commit we refactored the functions converting the
rounds number into a string for use with the crypt() function, to
not require any static buffer anymore.
Add some clarifying comments about how the minimum required buffer
length is computed inside of these functions.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
* Move all pre-processor defines to the top of the file.
* Unify the gensalt() function to be useable for all supported
hash methods.
* Drop the gensalt_{b,yes}crypt() functions in favor of the
previous change.
* Refactor the functions converting the rounds number into
a string for use with the crypt() function, to not require
any static buffer anymore.
* Clarify the comment about how crypt_make_salt() chooses the used
hash method from the settings in the login.defs file.
* Use memset() to fill static buffers with zero before using them.
* Use a fixed amount of 16 random base64-chars for the
sha{256,512}crypt hash methods, which is effectively still less
than the recommendation from NIST (>= 128 bits), but the maximum
those methods can effectively use (approx. 90 bits).
* Rename ROUNDS_{MIN,MAX} to SHA_ROUNDS_{MIN,MAX}.
* Bugfixes in the logic of setting rounds in BCRYPT_salt_rounds().
* Likewise for YESCRYPT_salt_cost().
* Fix formatting and white-space errors.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
The corresponding functions for the other hash methods all take
a pointer to an integer value as the only paramater, so this
particular function should do so as well.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
Closes#325
Add a new subid_init() function which can be used to specify the
stream on which error messages should be printed. (If you want to
get fancy you can redirect that to memory :) If subid_init() is
not called, use stderr. If NULL is passed, then /dev/null will
be used.
This patch also fixes up the 'Prog', which previously had to be
defined by any program linking against libsubid. Now, by default
in libsubid it will show (subid). Once subid_init() is called,
it will use the first variable passed to subid_init().
Signed-off-by: Serge Hallyn <serge@hallyn.com>
When uid 0 maps host uid 0 into the child userns newer kernels require
CAP_SETFCAP be retained as this allows the caller to create fscaps that
are valid in the ancestor userns. This was a security issue (in very
rare circumstances). So whenever host uid 0 is mapped, retain
CAP_SETFCAP if the caller had it.
Userspace won't need to set CAP_SETFCAP on newuidmap as this is really
only a scenario that real root should be doing which always has
CAP_SETFCAP. And if they don't then they are in a locked-down userns.
(LXC sometimes maps host uid 0 during chown operations in a helper
userns but will not rely on newuidmap for that. But we don't want to
risk regressing callers that want to rely on this behavior.)
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
