80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Samsung/HD256/HD256GJ/28CF7650B42C
Andrey Ponomarenko b1c41e7edc Update of reports (new: 3637, modified: 0)
2022-03-18 23:39:11 +03:00

347 lines
17 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.2 2020-12-30 r5155 [FreeBSD 13.0-STABLE-HBSD amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD256GJ
Serial Number: --
LU WWN Device Id: 5 0024e9 ...
Firmware Version: 1AR10006
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Sep 21 21:05:52 2021 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 24) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 2100) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 35) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1
2 Throughput_Performance POS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 083 073 025 - 5362
4 Start_Stop_Count -O--CK 099 099 000 - 1063
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate POSR-K 252 252 051 - 0
8 Seek_Time_Performance P-S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 30593
10 Spin_Retry_Count PO--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 252 252 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1050
183 Runtime_Bad_Block -O--CK 252 252 010 - 0
184 End-to-End_Error PO--CK 252 252 097 - 0
186 Unknown_Attribute -O--CK 252 252 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 6
188 Command_Timeout -O--CK 252 252 000 - 0
190 Airflow_Temperature_Cel -O---- 070 061 040 - 30 (Min/Max 6/39)
191 G-Sense_Error_Rate -O---K 020 020 000 - 813208
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
193 Load_Cycle_Count -O--CK 100 100 000 - 9464
194 Temperature_Celsius -O---- 064 061 000 - 30 (Min/Max 6/39)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 67
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 29
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
Device Error Count: 67 (device log contains only the most recent 8 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 67 [2] occurred at disk power-on lifetime: 27504 hours (1146 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 d1 00 00 15 f5 3d af e0 00 Error: ICRC, ABRT 209 sectors at LBA = 0x15f53daf = 368393647
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 04 c0 00 00 15 f5 39 c0 e0 08 00:00:10.594 WRITE DMA EXT
c8 00 00 00 00 00 00 00 f0 02 20 e7 08 00:00:10.594 READ DMA
35 00 00 08 40 00 00 15 f5 2f c0 e0 08 00:00:10.594 WRITE DMA EXT
35 00 00 03 80 00 00 15 f5 2c 40 e0 08 00:00:10.594 WRITE DMA EXT
35 00 00 08 00 00 00 15 f4 e0 00 e0 08 00:00:10.594 WRITE DMA EXT
Error 66 [1] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 01 01 00 00 11 1b d2 d7 e0 00 Error: ICRC, ABRT 257 sectors at LBA = 0x111bd2d7 = 287036119
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 02 00 00 00 11 1b d1 d8 e0 08 00:00:00.748 WRITE DMA EXT
ca 00 00 00 08 00 00 00 f7 65 50 ed 08 00:00:00.748 WRITE DMA
ca 00 00 00 08 00 00 00 f7 64 d8 ed 08 00:00:00.748 WRITE DMA
ca 00 00 00 08 00 00 00 4b 47 70 e4 08 00:00:00.748 WRITE DMA
ca 00 00 00 08 00 00 00 4b 47 08 e4 08 00:00:00.748 WRITE DMA
Error 65 [0] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 89 00 00 00 49 5c ef e4 00 Error: ICRC, ABRT at LBA = 0x04495cef = 71916783
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 d8 00 00 00 49 5c a0 e4 08 00:00:00.748 WRITE DMA
35 00 00 05 c0 00 00 04 49 56 e0 e0 08 00:00:00.748 WRITE DMA EXT
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.748 IDENTIFY DEVICE
ef 00 03 00 42 00 00 00 00 00 00 a0 08 00:00:00.748 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:00:00.748 IDENTIFY DEVICE
Error 64 [7] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 04 f1 00 00 04 49 57 af e0 00 Error: ICRC, ABRT 1265 sectors at LBA = 0x044957af = 71915439
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
35 00 00 05 c0 00 00 04 49 56 e0 e0 08 00:00:00.747 WRITE DMA EXT
25 00 00 00 08 00 00 12 ac 19 18 e0 08 00:00:00.747 READ DMA EXT
25 00 00 00 08 00 00 1a 6c 1a 08 e0 08 00:00:00.747 READ DMA EXT
25 00 00 00 08 00 00 1a 6c 1a 00 e0 08 00:00:00.747 READ DMA EXT
25 00 00 00 08 00 00 19 ec 18 f8 e0 08 00:00:00.747 READ DMA EXT
Error 63 [6] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 51 00 00 00 8e 68 a7 ed 00 Error: ICRC, ABRT at LBA = 0x0d8e68a7 = 227436711
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ca 00 00 00 60 00 00 00 8e 68 98 ed 08 00:00:00.743 WRITE DMA
ca 00 00 00 10 00 00 00 cf c8 c8 e0 08 00:00:00.743 WRITE DMA
ca 00 00 00 08 00 00 00 c4 28 e8 e0 08 00:00:00.743 WRITE DMA
ca 00 00 00 08 00 00 00 c0 08 30 e0 08 00:00:00.743 WRITE DMA
ca 00 00 00 08 00 00 00 c0 08 18 e0 08 00:00:00.743 WRITE DMA
Error 62 [5] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 00 2c 04 00 eb 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0b2c0400 = 187433984
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 2c 04 00 eb 08 00:00:00.709 READ DMA
c8 00 00 00 08 00 00 00 2b d6 70 eb 08 00:00:00.709 READ DMA
c8 00 00 00 08 00 00 00 2b db 50 eb 08 00:00:00.709 READ DMA
c8 00 00 00 08 00 00 00 6b da 20 eb 08 00:00:00.709 READ DMA
c8 00 00 00 08 00 00 00 6b d3 c8 eb 08 00:00:00.709 READ DMA
Error 61 [4] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 00 2b fc 38 eb 00 Error: ICRC, ABRT 8 sectors at LBA = 0x0b2bfc38 = 187431992
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 2b fc 38 eb 08 00:00:00.675 READ DMA
c8 00 00 00 f0 00 00 00 2a d9 10 eb 08 00:00:00.675 READ DMA
c8 00 00 00 08 00 00 00 2a d9 08 eb 08 00:00:00.675 READ DMA
c8 00 00 00 f0 00 00 00 2a da 10 eb 08 00:00:00.675 READ DMA
c8 00 00 00 08 00 00 00 2a da 08 eb 08 00:00:00.675 READ DMA
Error 60 [3] occurred at disk power-on lifetime: 27501 hours (1145 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 08 00 00 00 2c 0b 88 e4 00 Error: ICRC, ABRT 8 sectors at LBA = 0x042c0b88 = 69995400
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
c8 00 00 00 08 00 00 00 2c 0b 88 e4 08 00:00:00.639 READ DMA
25 00 00 00 08 00 00 1b 6c 14 70 e0 08 00:00:00.639 READ DMA EXT
25 00 00 00 08 00 00 1c 2c 15 48 e0 08 00:00:00.639 READ DMA EXT
25 00 00 00 08 00 00 1c 6c 13 30 e0 08 00:00:00.639 READ DMA EXT
25 00 00 00 08 00 00 1c 6c 13 70 e0 08 00:00:00.639 READ DMA EXT
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 80% 1 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Aborted_by_host [80% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 16/30 Celsius
Lifetime Min/Max Temperature: 6/39 Celsius
Specified Max Operating Temperature: 80 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (64)
SCT Error Recovery Control:
Read: 75 (7.5 seconds)
Write: 75 (7.5 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
View Git Blame Copy Permalink