mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
205 lines
8.8 KiB
Plaintext
205 lines
8.8 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: SAMSUNG SpinPoint P80
|
|
Device Model: SAMSUNG SP0812C
|
|
Serial Number: --
|
|
Firmware Version: SU100-32
|
|
User Capacity: 80,026,361,856 bytes [80.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ATA/ATAPI-7 T13/1532D revision 0
|
|
Local Time is: Mon Jul 3 08:51:31 2023 UTC
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Unavailable
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 22) The self-test routine was aborted by
|
|
the host.
|
|
Total time to complete Offline
|
|
data collection: ( 3000) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 50) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0
|
|
3 Spin_Up_Time POS--- 100 100 025 - 4032
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 821
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 011 - 0
|
|
7 Seek_Error_Rate POSR-- 100 100 051 - 0
|
|
8 Seek_Time_Performance P-S--K 100 100 015 - 0
|
|
9 Power_On_Half_Minutes -O--CK 099 099 000 - 5661h+03m
|
|
10 Spin_Retry_Count PO--CK 100 100 051 - 0
|
|
11 Calibration_Retry_Count -O--C- 100 100 000 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 508
|
|
194 Temperature_Celsius -O---K 154 061 000 - 28
|
|
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 76291
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Total_Offl_Uncorrectabl ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
200 Multi_Zone_Error_Rate -O-R-- 100 100 051 - 0
|
|
201 Soft_Read_Error_Rate -O-R-- 100 100 051 - 0
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 2 Comprehensive SMART error log
|
|
0x06 SL R/O 2 SMART self-test log
|
|
0x80-0x9f SL R/W 16 Host vendor specific log
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 636 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 636 occurred at disk power-on lifetime: 5659 hours (235 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 06 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 10 06 00 00 00 00 00 00:26:02.875 SET FEATURES [Enable SATA feature]
|
|
ec 00 00 00 00 00 a0 00 00:26:02.875 IDENTIFY DEVICE
|
|
ef 03 45 00 00 00 a0 00 00:26:02.875 SET FEATURES [Set transfer mode]
|
|
|
|
Error 635 occurred at disk power-on lifetime: 5659 hours (235 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 06 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 10 06 00 00 00 00 00 00:26:02.813 SET FEATURES [Enable SATA feature]
|
|
ec 00 00 00 00 00 a0 00 00:26:02.813 IDENTIFY DEVICE
|
|
00 00 01 01 00 00 a0 00 00:26:02.563 NOP [Abort queued commands]
|
|
ec 00 00 00 00 00 00 00 00:25:48.625 IDENTIFY DEVICE
|
|
b0 da 00 00 4f c2 00 00 00:25:48.563 SMART RETURN STATUS
|
|
|
|
Error 634 occurred at disk power-on lifetime: 5659 hours (235 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 06 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 10 06 00 00 00 00 00 00:00:19.125 SET FEATURES [Enable SATA feature]
|
|
ec 00 00 00 00 00 a0 00 00:00:19.125 IDENTIFY DEVICE
|
|
ef 03 45 00 00 00 a0 00 00:00:19.125 SET FEATURES [Set transfer mode]
|
|
|
|
Error 633 occurred at disk power-on lifetime: 5659 hours (235 days + 19 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 06 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 10 06 00 00 00 00 00 00:00:19.125 SET FEATURES [Enable SATA feature]
|
|
ec 00 00 00 00 00 a0 00 00:00:19.125 IDENTIFY DEVICE
|
|
00 00 01 01 00 00 a0 00 00:00:18.813 NOP [Abort queued commands]
|
|
00 00 01 01 00 00 a0 00 00:00:18.750 NOP [Abort queued commands]
|
|
ec 00 00 00 00 00 00 00 00:00:05.250 IDENTIFY DEVICE
|
|
|
|
Error 632 occurred at disk power-on lifetime: 5658 hours (235 days + 18 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
04 51 06 00 00 00 00 Error: ABRT
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
ef 10 06 00 00 00 00 00 00:01:13.250 SET FEATURES [Enable SATA feature]
|
|
ec 00 00 00 00 00 a0 00 00:01:13.250 IDENTIFY DEVICE
|
|
ef 03 45 00 00 00 a0 00 00:01:13.250 SET FEATURES [Set transfer mode]
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Abort offline test Aborted by host 60% 0 -
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|