80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST2000/ST2000DL001-9VT156/581574BDB603
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

328 lines
16 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-RELEASE-p2 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda Green (AF)
Device Model: ST2000DL001-9VT156
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: CC95
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical (offset 512 bytes)
Rotation Rate: 5900 rpm
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Oct 7 00:21:22 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 208 (intermediate), recommended: 208
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 623) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 355) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 115 094 006 - 87411104
3 Spin_Up_Time PO---- 094 092 000 - 0
4 Start_Stop_Count -O--CK 088 088 020 - 13167
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 087 060 030 - 552913485
9 Power_On_Hours -O--CK 065 065 000 - 31129
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 810
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 1006
188 Command_Timeout -O--CK 100 094 000 - 8590065673
189 High_Fly_Writes -O-RCK 048 048 000 - 52
190 Airflow_Temperature_Cel -O---K 066 043 045 Past 34 (0 117 34 30 0)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 354
193 Load_Cycle_Count -O--CK 097 097 000 - 7417
194 Temperature_Celsius -O---K 034 057 000 - 34 (0 16 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 115 099 000 - 87411104
197 Current_Pending_Sector -O--C- 100 090 000 - 0
198 Offline_Uncorrectable ----C- 100 090 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 30732 (100 149 0)
241 Total_LBAs_Written ------ 100 253 000 - 2590073431
242 Total_LBAs_Read ------ 100 253 000 - 1044467196
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5067 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 1004 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1004 [3] occurred at disk power-on lifetime: 21704 hours (904 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 13d+09:02:56.389 READ DMA EXT
35 00 00 01 00 00 00 01 32 80 3f e0 00 13d+09:02:56.387 WRITE DMA EXT
35 00 00 01 00 00 00 01 32 7f 3f e0 00 13d+09:02:56.387 WRITE DMA EXT
25 00 00 01 00 00 00 01 31 c6 3f e0 00 13d+09:02:56.386 READ DMA EXT
25 00 00 01 00 00 00 01 31 c5 3f e0 00 13d+09:02:56.385 READ DMA EXT
Error 1003 [2] occurred at disk power-on lifetime: 21704 hours (904 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 13d+09:02:10.884 READ DMA EXT
35 00 00 01 00 00 00 01 31 c6 3f e0 00 13d+09:02:10.883 WRITE DMA EXT
35 00 00 01 00 00 00 01 31 c5 3f e0 00 13d+09:02:10.882 WRITE DMA EXT
25 00 00 01 00 00 00 01 31 0b 3f e0 00 13d+09:02:10.881 READ DMA EXT
35 00 00 01 00 00 00 01 31 c4 3f e0 00 13d+09:02:10.879 WRITE DMA EXT
Error 1002 [1] occurred at disk power-on lifetime: 21704 hours (904 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 13d+09:01:22.761 READ DMA EXT
35 00 00 01 00 00 00 01 31 0c 3f e0 00 13d+09:01:22.760 WRITE DMA EXT
35 00 00 01 00 00 00 01 31 0b 3f e0 00 13d+09:01:22.759 WRITE DMA EXT
25 00 00 01 00 00 00 01 30 42 3f e0 00 13d+09:01:22.758 READ DMA EXT
25 00 00 01 00 00 00 01 30 41 3f e0 00 13d+09:01:22.588 READ DMA EXT
Error 1001 [0] occurred at disk power-on lifetime: 21704 hours (904 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 13d+09:00:15.372 READ DMA EXT
35 00 00 01 00 00 00 01 30 42 3f e0 00 13d+09:00:15.371 WRITE DMA EXT
35 00 00 01 00 00 00 01 30 41 3f e0 00 13d+09:00:15.370 WRITE DMA EXT
25 00 00 01 00 00 00 08 57 2b 8f e0 00 13d+09:00:15.369 READ DMA EXT
25 00 00 01 00 00 00 08 57 2a 8f e0 00 13d+09:00:15.360 READ DMA EXT
Error 1000 [19] occurred at disk power-on lifetime: 21704 hours (904 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 13d+08:31:41.325 READ DMA EXT
35 00 00 01 00 00 00 08 57 2b 8f e0 00 13d+08:31:41.324 WRITE DMA EXT
35 00 00 01 00 00 00 08 57 2a 8f e0 00 13d+08:31:41.323 WRITE DMA EXT
25 00 00 01 00 00 00 0c ca eb 5f e0 00 13d+08:31:41.322 READ DMA EXT
25 00 00 01 00 00 00 0c ca ea 5f e0 00 13d+08:31:41.142 READ DMA EXT
Error 999 [18] occurred at disk power-on lifetime: 21590 hours (899 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 8d+14:25:31.499 READ DMA EXT
35 00 00 01 00 00 00 0c ca eb 5f e0 00 8d+14:25:31.497 WRITE DMA EXT
35 00 00 01 00 00 00 0c ca ea 5f e0 00 8d+14:25:31.496 WRITE DMA EXT
25 00 00 01 00 00 00 0c ca 30 5f e0 00 8d+14:25:31.495 READ DMA EXT
35 00 00 01 00 00 00 0c ca e9 5f e0 00 8d+14:25:31.492 WRITE DMA EXT
Error 998 [17] occurred at disk power-on lifetime: 21590 hours (899 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 8d+14:24:45.794 READ DMA EXT
35 00 00 01 00 00 00 0c ca 31 5f e0 00 8d+14:24:45.793 WRITE DMA EXT
35 00 00 01 00 00 00 0c ca 30 5f e0 00 8d+14:24:45.792 WRITE DMA EXT
25 00 00 01 00 00 00 0c c9 77 5f e0 00 8d+14:24:45.791 READ DMA EXT
25 00 00 01 00 00 00 0c c9 76 5f e0 00 8d+14:24:45.615 READ DMA EXT
Error 997 [16] occurred at disk power-on lifetime: 21590 hours (899 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 48 36 d8 0f 00 00 Error: UNC at LBA = 0x4836d80f = 1211553807
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 48 36 d7 ff e0 00 8d+14:24:05.217 READ DMA EXT
35 00 00 01 00 00 00 0c c9 77 5f e0 00 8d+14:24:05.214 WRITE DMA EXT
35 00 00 01 00 00 00 0c c9 76 5f e0 00 8d+14:24:05.213 WRITE DMA EXT
25 00 00 01 00 00 00 0c c8 bc 5f e0 00 8d+14:24:05.211 READ DMA EXT
35 00 00 01 00 00 00 0c c9 75 5f e0 00 8d+14:24:05.209 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 30/34 Celsius
Lifetime Min/Max Temperature: 16/57 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (75)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink