80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Seagate/ST3100/ST31000333AS/1CF48D13EE2B
Andrey Ponomarenko a41331e270 Update of reports (new: 14, modified: 3797)
2023-02-14 02:15:20 +03:00

279 lines
13 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000333AS
Serial Number: --
LU WWN Device Id: 5 000c50 ...
Firmware Version: SD35
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 31 02:42:52 2021 EDT
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/207951en
http://knowledge.seagate.com/articles/en_US/FAQ/207957en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 208) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 115 099 006 - 86949018
3 Spin_Up_Time PO---- 093 091 000 - 0
4 Start_Stop_Count -O--CK 090 090 020 - 10482
5 Reallocated_Sector_Ct PO--CK 099 099 036 - 78
7 Seek_Error_Rate POSR-- 084 060 030 - 237682045
9 Power_On_Hours -O--CK 092 092 000 - 7687
10 Spin_Retry_Count PO--C- 100 100 097 - 84
12 Power_Cycle_Count -O--CK 092 037 020 - 9138
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 095 095 000 - 5
188 Command_Timeout -O--CK 100 098 000 - 17182228567
189 High_Fly_Writes -O-RCK 001 001 000 - 2226
190 Airflow_Temperature_Cel -O---K 067 044 045 Past 33 (0 40 33 19 0)
194 Temperature_Celsius -O---K 033 056 000 - 33 (0 10 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 040 021 000 - 86949018
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 2
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x21 GPL,SL R/O 1 Write stream error log
0x22 GPL,SL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xb0 GPL VS 2819 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:33.602 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
Error 4 [3] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:29.579 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:25.485 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 60 40 00 00:02:25.481 READ DMA EXT
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT
Error 2 [1] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 17 50 00 85 20 40 00 00:02:21.796 READ DMA EXT
25 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:21.658 READ DMA EXT
2f 00 00 00 01 00 00 00 00 00 10 00 00 00:02:21.573 READ LOG EXT
60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED
60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 7455 hours (310 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 17 50 00 85 26 00 00 Error: UNC at LBA = 0x1750008526 = 100126459174
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 33 00 b3 98 40 00 00:02:17.873 READ FPDMA QUEUED
60 00 00 00 08 00 00 45 00 b3 10 40 00 00:02:17.870 READ FPDMA QUEUED
60 00 00 00 08 00 00 5a 00 b3 40 40 00 00:02:17.864 READ FPDMA QUEUED
60 00 00 00 08 00 00 44 00 b3 70 40 00 00:02:17.864 READ FPDMA QUEUED
60 00 00 00 08 00 00 32 00 b4 a0 40 00 00:02:17.864 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7330 -
# 2 Extended offline Aborted by host 90% 7330 -
# 3 Short offline Completed without error 00% 6773 -
# 4 Extended offline Interrupted (host reset) 00% 6074 -
# 5 Short offline Aborted by host 90% 1772 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 19/32 Celsius
Lifetime Min/Max Temperature: 10/56 Celsius
Under/Over Temperature Limit Count: 0/29
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (61)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
View Git Blame Copy Permalink