mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
324 lines
17 KiB
Plaintext
324 lines
17 KiB
Plaintext
smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.1-STABLE amd64] (local build)
|
|
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Seagate BarraCuda 3.5 (SMR)
|
|
Device Model: ST4000DM004-2CV104
|
|
Serial Number: --
|
|
LU WWN Device Id: 5 000c50 ...
|
|
Firmware Version: 0001
|
|
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
|
|
Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|
Rotation Rate: 5425 rpm
|
|
Device is: In smartctl database 7.3/5319
|
|
ATA Version is: ACS-3 T13/2161-D revision 5
|
|
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|
Local Time is: Mon Oct 24 17:27:20 2022 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM feature is: Unavailable
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x82) Offline data collection activity
|
|
was completed without error.
|
|
Auto Offline Data Collection: Enabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 0) seconds.
|
|
Offline data collection
|
|
capabilities: (0x7b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
Conveyance Self-test supported.
|
|
Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
General Purpose Logging supported.
|
|
Short self-test routine
|
|
recommended polling time: ( 1) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 486) minutes.
|
|
Conveyance self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
SCT capabilities: (0x30a5) SCT Status supported.
|
|
SCT Data Table supported.
|
|
|
|
SMART Attributes Data Structure revision number: 10
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate POSR-- 083 061 006 - 204847434
|
|
3 Spin_Up_Time PO---- 096 096 000 - 0
|
|
4 Start_Stop_Count -O--CK 095 095 020 - 5905
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|
7 Seek_Error_Rate POSR-- 081 060 045 - 138157336
|
|
9 Power_On_Hours -O--CK 090 090 000 - 9570h+05m+58.369s
|
|
10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|
12 Power_Cycle_Count -O--CK 095 095 020 - 5456
|
|
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|
184 End-to-End_Error -O--CK 100 100 099 - 0
|
|
187 Reported_Uncorrect -O--CK 076 076 000 - 24
|
|
188 Command_Timeout -O--CK 100 099 000 - 0 1 1
|
|
189 High_Fly_Writes -O-RCK 100 100 000 - 0
|
|
190 Airflow_Temperature_Cel -O---K 073 050 040 - 27 (Min/Max 22/27)
|
|
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1085
|
|
193 Load_Cycle_Count -O--CK 091 091 000 - 18691
|
|
194 Temperature_Celsius -O---K 027 050 000 - 27 (0 16 0 0 0)
|
|
195 Hardware_ECC_Recovered -O-RC- 083 064 000 - 204847434
|
|
197 Current_Pending_Sector -O--C- 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----C- 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
|
|
240 Head_Flying_Hours ------ 100 253 000 - 5892h+01m+08.084s
|
|
241 Total_LBAs_Written ------ 100 253 000 - 58273582721
|
|
242 Total_LBAs_Read ------ 100 253 000 - 17183168748
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
General Purpose Log Directory Version 1
|
|
SMART Log Directory Version 1 [multi-sector log support]
|
|
Address Access R/W Size Description
|
|
0x00 GPL,SL R/O 1 Log Directory
|
|
0x01 SL R/O 1 Summary SMART error log
|
|
0x02 SL R/O 5 Comprehensive SMART error log
|
|
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
|
|
0x04 GPL,SL R/O 8 Device Statistics log
|
|
0x06 SL R/O 1 SMART self-test log
|
|
0x07 GPL R/O 1 Extended self-test log
|
|
0x08 GPL R/O 2 Power Conditions log
|
|
0x09 SL R/W 1 Selective self-test log
|
|
0x0c GPL R/O 2048 Pending Defects log
|
|
0x10 GPL R/O 1 NCQ Command Error log
|
|
0x11 GPL R/O 1 SATA Phy Event Counters log
|
|
0x21 GPL R/O 1 Write stream error log
|
|
0x22 GPL R/O 1 Read stream error log
|
|
0x24 GPL R/O 512 Current Device Internal Status Data log
|
|
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|
0xa1 GPL,SL VS 24 Device vendor specific log
|
|
0xa2 GPL VS 8160 Device vendor specific log
|
|
0xa6 GPL VS 192 Device vendor specific log
|
|
0xa8-0xa9 GPL,SL VS 136 Device vendor specific log
|
|
0xab GPL VS 1 Device vendor specific log
|
|
0xb0 GPL VS 9048 Device vendor specific log
|
|
0xbe-0xbf GPL VS 65535 Device vendor specific log
|
|
0xc0 GPL,SL VS 1 Device vendor specific log
|
|
0xc1 GPL,SL VS 16 Device vendor specific log
|
|
0xc3 GPL,SL VS 8 Device vendor specific log
|
|
0xc4 GPL,SL VS 24 Device vendor specific log
|
|
0xd1 GPL VS 264 Device vendor specific log
|
|
0xd3 GPL VS 1920 Device vendor specific log
|
|
0xe0 GPL,SL R/W 1 SCT Command/Status
|
|
0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|
|
|
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|
Device Error Count: 24 (device log contains only the most recent 20 errors)
|
|
CR = Command Register
|
|
FEATR = Features Register
|
|
COUNT = Count (was: Sector Count) Register
|
|
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
|
LH = LBA High (was: Cylinder High) Register ] LBA
|
|
LM = LBA Mid (was: Cylinder Low) Register ] Register
|
|
LL = LBA Low (was: Sector Number) Register ]
|
|
DV = Device (was: Device/Head) Register
|
|
DC = Device Control Register
|
|
ER = Error register
|
|
ST = Status register
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 24 [3] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 01 00 00 01 7f f1 51 08 40 00 00:03:47.233 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 01 80 30 0f a8 40 00 00:03:47.233 READ FPDMA QUEUED
|
|
60 00 00 00 28 00 01 7f f1 4f e0 40 00 00:03:47.232 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 01 7f f3 0c 38 40 00 00:03:47.232 READ FPDMA QUEUED
|
|
61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:47.232 WRITE FPDMA QUEUED
|
|
|
|
Error 23 [2] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: WP at LBA = 0x19a672440 = 6885418048
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:40.760 WRITE FPDMA QUEUED
|
|
60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:40.759 READ FPDMA QUEUED
|
|
60 00 00 00 90 00 01 7f f3 0e 08 40 00 00:03:40.758 READ FPDMA QUEUED
|
|
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:40.757 FLUSH CACHE EXT
|
|
ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:03:40.757 SET FEATURES [Enable SATA feature]
|
|
|
|
Error 22 [1] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:34.564 READ FPDMA QUEUED
|
|
61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:34.564 WRITE FPDMA QUEUED
|
|
60 00 00 00 20 00 01 7f f3 0b 38 40 00 00:03:34.562 READ FPDMA QUEUED
|
|
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:34.562 FLUSH CACHE EXT
|
|
ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:03:34.562 SET FEATURES [Enable SATA feature]
|
|
|
|
Error 21 [0] occurred at disk power-on lifetime: 2521 hours (105 days + 1 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER -- ST COUNT LBA_48 LH LM LL DV DC
|
|
-- -- -- == -- == == == -- -- -- -- --
|
|
40 -- 53 00 00 00 01 9a 67 24 40 00 00 Error: UNC at LBA = 0x19a672440 = 6885418048
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
|
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
|
60 00 00 00 20 00 01 7f f3 0b 38 40 00 00:03:28.020 READ FPDMA QUEUED
|
|
61 00 00 00 08 00 01 57 a7 18 00 40 00 00:03:28.020 WRITE FPDMA QUEUED
|
|
60 00 00 00 08 00 01 9a 67 24 40 40 00 00:03:28.020 READ FPDMA QUEUED
|
|
60 00 00 01 00 00 01 7f f1 50 08 40 00 00:03:28.019 READ FPDMA QUEUED
|
|
ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:03:28.019 FLUSH CACHE EXT
|
|
|
|
Error 20 [19] log entry is empty
|
|
Error 19 [18] log entry is empty
|
|
Error 18 [17] log entry is empty
|
|
Error 17 [16] log entry is empty
|
|
SMART Extended Self-test Log Version: 1 (1 sectors)
|
|
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|
# 1 Short offline Completed without error 00% 9515 -
|
|
# 2 Short offline Completed without error 00% 9513 -
|
|
# 3 Short offline Completed without error 00% 9508 -
|
|
# 4 Short offline Completed without error 00% 9507 -
|
|
# 5 Short offline Completed without error 00% 9503 -
|
|
# 6 Short offline Completed without error 00% 9497 -
|
|
# 7 Extended offline Interrupted (host reset) 80% 9490 -
|
|
# 8 Short offline Completed without error 00% 9480 -
|
|
# 9 Short offline Completed without error 00% 9473 -
|
|
#10 Short offline Completed without error 00% 9463 -
|
|
#11 Short offline Completed without error 00% 9000 -
|
|
#12 Extended offline Interrupted (host reset) 00% 8992 -
|
|
#13 Short offline Completed without error 00% 8511 -
|
|
|
|
SMART Selective self-test log data structure revision number 1
|
|
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
1 0 0 Not_testing
|
|
2 0 0 Not_testing
|
|
3 0 0 Not_testing
|
|
4 0 0 Not_testing
|
|
5 0 0 Not_testing
|
|
Selective self-test flags (0x0):
|
|
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|
|
|
SCT Status Version: 3
|
|
SCT Version (vendor specific): 522 (0x020a)
|
|
Device State: Active (0)
|
|
Current Temperature: 27 Celsius
|
|
Power Cycle Min/Max Temperature: 22/27 Celsius
|
|
Lifetime Min/Max Temperature: 16/50 Celsius
|
|
Under/Over Temperature Limit Count: 0/0
|
|
|
|
SCT Temperature History Version: 2
|
|
Temperature Sampling Period: 3 minutes
|
|
Temperature Logging Interval: 59 minutes
|
|
Min/Max recommended Temperature: 14/55 Celsius
|
|
Min/Max Temperature Limit: 10/60 Celsius
|
|
Temperature History Size (Index): 128 (98)
|
|
|
|
SCT Error Recovery Control command not supported
|
|
|
|
Device Statistics (GP Log 0x04)
|
|
Page Offset Size Value Flags Description
|
|
0x01 ===== = = === == General Statistics (rev 1) ==
|
|
0x01 0x008 4 5456 --- Lifetime Power-On Resets
|
|
0x01 0x010 4 9570 --- Power-on Hours
|
|
0x01 0x018 6 58269861421 --- Logical Sectors Written
|
|
0x01 0x020 6 228005727 --- Number of Write Commands
|
|
0x01 0x028 6 17184962383 --- Logical Sectors Read
|
|
0x01 0x030 6 134273564 --- Number of Read Commands
|
|
0x01 0x038 6 - --- Date and Time TimeStamp
|
|
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
|
0x03 0x008 4 2337660784 N-- Spindle Motor Power-on Hours
|
|
0x03 0x010 4 2337653846 N-- Head Flying Hours
|
|
0x03 0x018 4 18691 --- Head Load Events
|
|
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
|
|
0x03 0x028 4 0 --- Read Recovery Attempts
|
|
0x03 0x030 4 4 --- Number of Mechanical Start Failures
|
|
0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
|
|
0x03 0x040 4 1083 --- Number of High Priority Unload Events
|
|
0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|
0x04 0x008 4 28 --- Number of Reported Uncorrectable Errors
|
|
0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
|
0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|
0x05 0x008 1 27 --- Current Temperature
|
|
0x05 0x010 1 26 --- Average Short Term Temperature
|
|
0x05 0x018 1 25 --- Average Long Term Temperature
|
|
0x05 0x020 1 37 --- Highest Temperature
|
|
0x05 0x028 1 0 --- Lowest Temperature
|
|
0x05 0x030 1 35 --- Highest Average Short Term Temperature
|
|
0x05 0x038 1 23 --- Lowest Average Short Term Temperature
|
|
0x05 0x040 1 31 --- Highest Average Long Term Temperature
|
|
0x05 0x048 1 24 --- Lowest Average Long Term Temperature
|
|
0x05 0x050 4 0 --- Time in Over-Temperature
|
|
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
|
0x05 0x060 4 1343 --- Time in Under-Temperature
|
|
0x05 0x068 1 13 --- Specified Minimum Operating Temperature
|
|
0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|
0x06 0x008 4 15060 --- Number of Hardware Resets
|
|
0x06 0x010 4 3978 --- Number of ASR Events
|
|
0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|
|||_ C monitored condition met
|
|
||__ D supports DSN
|
|
|___ N normalized value
|
|
|
|
Pending Defects log (GP Log 0x0c)
|
|
No Defects Logged
|
|
|
|
SATA Phy Event Counters (GP Log 0x11)
|
|
ID Size Value Description
|
|
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|
0x0001 2 0 Command failed due to ICRC error
|
|
0x0003 2 0 R_ERR response for device-to-host data FIS
|
|
0x0004 2 0 R_ERR response for host-to-device data FIS
|
|
0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|
0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|
|
|
|
|
|