80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MG05/MG05ACA800E/D7A0DB80EC88
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

412 lines
21 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 13.0-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG05ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG05ACA800E
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: GX1A
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.2/5254
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Aug 14 12:34:24 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 745) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 090 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 7690
4 Start_Stop_Count -O--CK 100 100 000 - 51
5 Reallocated_Sector_Ct PO--CK 003 003 050 NOW 16336 (0 1)
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 014 014 000 - 34448
10 Spin_Retry_Count PO--CK 101 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 50
191 G-Sense_Error_Rate -O--CK 100 100 000 - 1
192 Power-Off_Retract_Count -O--CK 100 100 000 - 36
193 Load_Cycle_Count -O--CK 100 100 000 - 57
194 Temperature_Celsius -O---K 100 100 000 - 38 (Min/Max 14/52)
196 Reallocated_Event_Count -O--CK 100 100 000 - 8499
197 Current_Pending_Sector -O--CK 100 100 000 - 48
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 26
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 018 018 000 - 33121
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 569
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0a GPL R/W 2 Device Statistics Notification
0x0c GPL R/O 2048 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x24 GPL R/O 16384 Current Device Internal Status Data log
0x25 GPL R/O 16384 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa7 GPL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 4960 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4960 [95] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 a8 00 00 2e be c9 b0 40 00 Error: WP at LBA = 0x2ebec9b0 = 784255408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 18 00 01 9d ba 33 f8 40 00 3d+08:26:38.820 WRITE FPDMA QUEUED
61 00 10 00 10 00 01 9d ba 33 c8 40 00 3d+08:26:38.819 WRITE FPDMA QUEUED
61 00 10 00 08 00 01 9d b6 c4 58 40 00 3d+08:26:38.819 WRITE FPDMA QUEUED
61 00 10 00 00 00 01 9d b6 c4 28 40 00 3d+08:26:38.819 WRITE FPDMA QUEUED
61 00 10 00 f8 00 01 9d b6 c3 e8 40 00 3d+08:26:38.819 WRITE FPDMA QUEUED
Error 4959 [94] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 90 00 00 2e be c9 c8 40 00 Error: WP at LBA = 0x2ebec9c8 = 784255432
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 10 00 98 00 01 9d cd a6 f8 40 00 3d+08:26:32.104 WRITE FPDMA QUEUED
61 00 10 00 88 00 01 9d ba 34 58 40 00 3d+08:26:32.104 WRITE FPDMA QUEUED
61 00 10 00 80 00 01 9d ba 34 38 40 00 3d+08:26:32.103 WRITE FPDMA QUEUED
61 00 10 00 78 00 01 9d ba 34 18 40 00 3d+08:26:32.103 WRITE FPDMA QUEUED
61 00 10 00 70 00 01 9f 2d a1 18 40 00 3d+08:26:32.103 WRITE FPDMA QUEUED
Error 4958 [93] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 38 00 00 2e be cb 28 40 00 Error: UNC at LBA = 0x2ebecb28 = 784255784
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 40 00 01 85 7c 27 d8 40 00 3d+08:26:20.214 READ FPDMA QUEUED
60 08 00 00 38 00 00 2e be c8 08 40 00 3d+08:26:20.214 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 3d+08:26:20.214 READ LOG EXT
60 00 10 00 28 00 01 85 7c 27 d8 40 00 3d+08:26:13.501 READ FPDMA QUEUED
61 00 10 00 20 00 01 9f 2d a0 e8 40 00 3d+08:26:13.501 WRITE FPDMA QUEUED
Error 4957 [92] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 00 00 00 2e be c9 c0 40 00 Error: UNC at LBA = 0x2ebec9c0 = 784255424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 10 00 28 00 01 85 7c 27 d8 40 00 3d+08:26:13.501 READ FPDMA QUEUED
61 00 10 00 20 00 01 9f 2d a0 e8 40 00 3d+08:26:13.501 WRITE FPDMA QUEUED
61 00 50 00 18 00 01 9f 2d a0 28 40 00 3d+08:26:13.500 WRITE FPDMA QUEUED
61 00 e0 00 10 00 01 9d e0 a8 18 40 00 3d+08:26:13.500 WRITE FPDMA QUEUED
61 00 40 00 08 00 01 9d e0 a0 18 40 00 3d+08:26:13.500 WRITE FPDMA QUEUED
Error 4956 [91] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 88 00 00 2e be c9 c0 40 00 Error: UNC at LBA = 0x2ebec9c0 = 784255424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 06 80 00 98 00 02 28 d0 5a 88 40 00 3d+08:26:04.494 READ FPDMA QUEUED
60 00 10 00 90 00 00 ff 26 20 08 40 00 3d+08:26:04.494 READ FPDMA QUEUED
60 08 00 00 88 00 00 2e be c8 08 40 00 3d+08:26:04.494 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 3d+08:26:04.494 READ LOG EXT
60 06 80 00 78 00 02 28 d0 5a 88 40 00 3d+08:26:03.931 READ FPDMA QUEUED
Error 4955 [90] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 68 00 00 2e be c9 c0 40 00 Error: UNC at LBA = 0x2ebec9c0 = 784255424
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 06 80 00 78 00 02 28 d0 5a 88 40 00 3d+08:26:03.931 READ FPDMA QUEUED
60 00 10 00 70 00 00 ff 26 20 08 40 00 3d+08:25:57.191 READ FPDMA QUEUED
60 08 00 00 68 00 00 2e be c8 08 40 00 3d+08:25:57.191 READ FPDMA QUEUED
60 00 e0 00 60 00 02 ff ff fe 28 40 00 3d+08:25:57.190 READ FPDMA QUEUED
60 00 e0 00 58 00 02 ff ff fc 28 40 00 3d+08:25:57.189 READ FPDMA QUEUED
Error 4954 [89] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 d8 00 00 2e be c9 b0 40 00 Error: UNC at LBA = 0x2ebec9b0 = 784255408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 08 00 00 d8 00 00 2e be c8 08 40 00 3d+08:25:52.911 READ FPDMA QUEUED
2f 00 00 00 01 00 00 00 00 00 10 00 00 3d+08:25:52.910 READ LOG EXT
60 08 00 00 c8 00 00 2e be c8 08 40 00 3d+08:25:48.195 READ FPDMA QUEUED
61 00 10 00 c0 00 02 ff ff fe 18 40 00 3d+08:25:48.063 WRITE FPDMA QUEUED
61 00 10 00 b8 00 02 ff ff fc 18 40 00 3d+08:25:48.061 WRITE FPDMA QUEUED
Error 4953 [88] occurred at disk power-on lifetime: 34438 hours (1434 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 41 00 c8 00 00 2e be c9 b0 40 00 Error: UNC at LBA = 0x2ebec9b0 = 784255408
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 08 00 00 c8 00 00 2e be c8 08 40 00 3d+08:25:48.195 READ FPDMA QUEUED
61 00 10 00 c0 00 02 ff ff fe 18 40 00 3d+08:25:48.063 WRITE FPDMA QUEUED
61 00 10 00 b8 00 02 ff ff fc 18 40 00 3d+08:25:48.061 WRITE FPDMA QUEUED
60 06 80 00 b0 00 00 7b 73 2d 08 40 00 3d+08:25:48.049 READ FPDMA QUEUED
60 06 80 00 a8 00 00 7b 73 2d 08 40 00 3d+08:25:48.038 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 28063 346656
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 29/43 Celsius
Lifetime Min/Max Temperature: 14/52 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (254)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 50 --- Lifetime Power-On Resets
0x01 0x010 4 34448 --- Power-on Hours
0x01 0x018 6 115483768366 --- Logical Sectors Written
0x01 0x020 6 1245221195 --- Number of Write Commands
0x01 0x028 6 1979267533500 --- Logical Sectors Read
0x01 0x030 6 3694321503 --- Number of Read Commands
0x01 0x038 6 124013134892 --- Date and Time TimeStamp
0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
0x02 0x010 4 1 --- Overlimit Shock Events
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 34447 --- Spindle Motor Power-on Hours
0x03 0x010 4 33121 --- Head Flying Hours
0x03 0x018 4 57 --- Head Load Events
0x03 0x020 4 81872 -D- Number of Reallocated Logical Sectors
0x03 0x028 4 1470695 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x03 0x038 4 48 --- Number of Realloc. Candidate Logical Sectors
0x03 0x040 4 36 --- Number of High Priority Unload Events
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 4933 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 806 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 39 --- Current Temperature
0x05 0x010 1 38 N-- Average Short Term Temperature
0x05 0x018 1 34 N-- Average Long Term Temperature
0x05 0x020 1 52 --- Highest Temperature
0x05 0x028 1 14 --- Lowest Temperature
0x05 0x030 1 45 N-- Highest Average Short Term Temperature
0x05 0x038 1 20 N-- Lowest Average Short Term Temperature
0x05 0x040 1 38 N-- Highest Average Long Term Temperature
0x05 0x048 1 21 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 55 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 2522 --- Number of Hardware Resets
0x06 0x010 4 284 --- Number of ASR Events
0x06 0x018 4 26 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
Index LBA Hours
0 574749120 -
1 574749121 -
2 574749122 -
3 574749123 -
4 574749124 -
5 574749125 -
6 574749126 -
7 574749127 -
8 574983192 -
9 574983193 -
10 574983194 -
11 574983195 -
12 574983196 -
13 574983197 -
14 574983198 -
15 574983199 -
16 575113880 -
17 575113881 -
18 575113882 -
19 575113883 -
20 575113884 -
21 575113885 -
22 575113886 -
23 575113887 -
24 591823800 -
25 591823801 -
26 591823802 -
27 591823803 -
28 591823804 -
29 591823805 -
30 591823806 -
... (17 entries not shown)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 12 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 12 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
View Git Blame Copy Permalink