80486DX2-66/SMART-open-study
1
0
Fork 0
mirror of https://github.com/bsdhw/SMART.git synced 2025-05-31 16:21:41 +05:30
Code Issues Activity
Files
master
SMART-open-study/HDD/Toshiba/MK2002/MK2002TSKB/FC378DDDD72B
Andrey Ponomarenko 06d1e49c98 Update of reports (new: 3633, modified: 0)
2023-02-14 01:25:13 +03:00

311 lines
15 KiB
Plaintext
Raw Permalink Blame History

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" HDD MK.002TSKB
Device Model: TOSHIBA MK2002TSKB
Serial Number: --
LU WWN Device Id: 5 000039 ...
Firmware Version: MT4A
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat Jul 16 17:17:57 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 364) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 5257
4 Start_Stop_Count -O--CK 100 100 000 - 3166
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 2
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 035 035 000 - 26120
10 Spin_Retry_Count PO--CK 163 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 1660
191 G-Sense_Error_Rate -O--CK 100 100 000 - 3
192 Power-Off_Retract_Count -O--CK 099 099 000 - 950
193 Load_Cycle_Count -O--CK 100 100 000 - 4514
194 Temperature_Celsius -O---K 100 100 000 - 47 (Min/Max 15/63)
196 Reallocated_Event_Count -O--CK 100 100 000 - 2
197 Current_Pending_Sector -O--CK 100 100 000 - 1
198 Offline_Uncorrectable ----CK 100 100 000 - 1
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 252204
220 Disk_Shift -O---- 100 100 000 - 42
222 Loaded_Hours -O--CK 037 037 000 - 25518
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 189
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 65535 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 [248] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 6f 00 00 1e e2 fc 49 40 00 Error: ICRC, ABRT 111 sectors at LBA = 0x1ee2fc49 = 518192201
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1e e2 fc 38 40 00 00:31:28.381 READ DMA EXT
25 00 00 00 80 00 00 1e e2 fb b8 40 00 00:31:28.223 READ DMA EXT
25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT
Error 65534 [247] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 5f 00 00 1e e2 fb d9 40 00 Error: ICRC, ABRT 95 sectors at LBA = 0x1ee2fbd9 = 518192089
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1e e2 fb b8 40 00 00:31:28.223 READ DMA EXT
25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT
Error 65533 [246] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 5f 00 00 1e e2 fb 59 40 00 Error: ICRC, ABRT 95 sectors at LBA = 0x1ee2fb59 = 518191961
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 80 00 00 1e e2 fb 38 40 00 00:31:28.063 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:28.053 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 68 40 00 00:31:27.567 READ DMA EXT
Error 65532 [245] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 5f e0 7f 40 00 Error: ICRC, ABRT at LBA = 0x005fe07f = 6283391
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 5f e0 78 40 00 00:31:27.569 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 70 40 00 00:31:27.568 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 68 40 00 00:31:27.567 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 60 40 00 00:31:27.567 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 58 40 00 00:31:27.566 READ DMA EXT
Error 65531 [244] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 1e e2 fb 37 40 00 Error: ICRC, ABRT at LBA = 0x1ee2fb37 = 518191927
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 1e e2 fb 30 40 00 00:31:26.881 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 28 40 00 00:31:26.880 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 20 40 00 00:31:26.743 READ DMA EXT
b0 00 d8 00 00 00 00 00 c2 4f 00 00 00 00:31:26.722 SMART ENABLE OPERATIONS
ef 00 02 00 00 00 00 00 00 00 00 00 00 00:31:26.722 SET FEATURES [Enable write cache]
Error 65530 [243] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 5f e0 1f 40 00 Error: ICRC, ABRT at LBA = 0x005fe01f = 6283295
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 5f e0 18 40 00 00:30:26.556 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 10 40 00 00:30:26.555 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 08 40 00 00:30:26.555 READ DMA EXT
25 00 00 00 08 00 00 00 5f e0 00 40 00 00:30:26.554 READ DMA EXT
25 00 00 00 08 00 00 00 5f df f8 40 00 00:30:26.553 READ DMA EXT
Error 65529 [242] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 1e e2 fb 27 40 00 Error: ICRC, ABRT at LBA = 0x1ee2fb27 = 518191911
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 1e e2 fb 20 40 00 00:30:26.089 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 18 40 00 00:30:26.088 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 10 40 00 00:30:26.087 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 08 40 00 00:30:26.075 READ DMA EXT
25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:25.373 READ DMA EXT
Error 65528 [241] occurred at disk power-on lifetime: 24026 hours (1001 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
84 -- 51 00 00 00 00 00 5f df df 40 00 Error: ICRC, ABRT at LBA = 0x005fdfdf = 6283231
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:25.373 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 08 40 00 00:30:24.913 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fb 00 40 00 00:30:24.912 READ DMA EXT
25 00 00 00 08 00 00 1e e2 fa f8 40 00 00:30:24.905 READ DMA EXT
25 00 00 00 08 00 00 00 5f df d8 40 00 00:30:24.218 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 1 (0x0001)
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 38/52 Celsius
Lifetime Min/Max Temperature: 15/63 Celsius
Under/Over Temperature Limit Count: 0/884
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/55 Celsius
Min/Max Temperature Limit: 5/55 Celsius
Temperature History Size (Index): 478 (229)
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0008 4 0 Device-to-host non-data FIS retries
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
View Git Blame Copy Permalink