mirror of
https://github.com/bsdhw/SMART.git
synced 2025-05-31 16:21:41 +05:30
209 lines
9.2 KiB
Plaintext
209 lines
9.2 KiB
Plaintext
smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.1-RELEASE-p9 i386] (local build)
|
|
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
|
|
|
=== START OF INFORMATION SECTION ===
|
|
Model Family: Toshiba 2.5" HDD (10-20 GB)
|
|
Device Model: TOSHIBA MK2018GAP
|
|
Serial Number: --
|
|
Firmware Version: M1.42 A
|
|
User Capacity: 20,003,880,960 bytes [20.0 GB]
|
|
Sector Size: 512 bytes logical/physical
|
|
Device is: In smartctl database [for details use: -P show]
|
|
ATA Version is: ATA/ATAPI-5 (minor revision not indicated)
|
|
Local Time is: Wed Sep 16 23:09:11 2020 CEST
|
|
SMART support is: Available - device has SMART capability.
|
|
SMART support is: Enabled
|
|
AAM feature is: Unavailable
|
|
APM level is: 128 (minimum power consumption without standby)
|
|
Rd look-ahead is: Enabled
|
|
Write cache is: Enabled
|
|
DSN feature is: Unavailable
|
|
ATA Security is: Disabled, frozen [SEC2]
|
|
Wt Cache Reorder: Unavailable
|
|
|
|
=== START OF READ SMART DATA SECTION ===
|
|
SMART overall-health self-assessment test result: PASSED
|
|
|
|
General SMART Values:
|
|
Offline data collection status: (0x00) Offline data collection activity
|
|
was never started.
|
|
Auto Offline Data Collection: Disabled.
|
|
Self-test execution status: ( 0) The previous self-test routine completed
|
|
without error or no self-test has ever
|
|
been run.
|
|
Total time to complete Offline
|
|
data collection: ( 212) seconds.
|
|
Offline data collection
|
|
capabilities: (0x1b) SMART execute Offline immediate.
|
|
Auto Offline data collection on/off support.
|
|
Suspend Offline collection upon new
|
|
command.
|
|
Offline surface scan supported.
|
|
Self-test supported.
|
|
No Conveyance Self-test supported.
|
|
No Selective Self-test supported.
|
|
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
power-saving mode.
|
|
Supports SMART auto save timer.
|
|
Error logging capability: (0x01) Error logging supported.
|
|
No General Purpose Logging support.
|
|
Short self-test routine
|
|
recommended polling time: ( 2) minutes.
|
|
Extended self-test routine
|
|
recommended polling time: ( 24) minutes.
|
|
|
|
SMART Attributes Data Structure revision number: 16
|
|
Vendor Specific SMART Attributes with Thresholds:
|
|
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
|
2 Throughput_Performance P-S--- 100 100 050 - 0
|
|
3 Spin_Up_Time POS--K 100 100 001 - 979
|
|
4 Start_Stop_Count -O--CK 100 100 000 - 1340
|
|
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 31
|
|
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
|
|
8 Seek_Time_Performance P-S--- 100 100 050 - 0
|
|
9 Power_On_Hours -O--CK 093 093 000 - 3037
|
|
10 Spin_Retry_Count PO--CK 126 100 030 - 0
|
|
12 Power_Cycle_Count -O--CK 100 100 000 - 1334
|
|
192 Power-Off_Retract_Count -O--CK 100 100 000 - 64
|
|
193 Load_Cycle_Count -O--CK 089 089 000 - 118941
|
|
196 Reallocated_Event_Count -O--CK 100 100 000 - 19
|
|
197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|
198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
|
220 Disk_Shift -O---- 100 100 000 - 4200
|
|
222 Loaded_Hours -O--CK 096 096 000 - 1880
|
|
223 Load_Retry_Count -O--CK 100 100 000 - 0
|
|
224 Load_Friction -O---K 100 100 000 - 0
|
|
226 Load-in_Time -OS--K 100 100 000 - 353
|
|
240 Head_Flying_Hours P----- 100 100 001 - 3
|
|
||||||_ K auto-keep
|
|
|||||__ C event count
|
|
||||___ R error rate
|
|
|||____ S speed/performance
|
|
||_____ O updated online
|
|
|______ P prefailure warning
|
|
|
|
Read SMART Log Directory failed: Input/output error
|
|
|
|
General Purpose Log Directory not supported
|
|
|
|
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|
|
|
SMART Error Log Version: 1
|
|
ATA Error Count: 212 (device log contains only the most recent five errors)
|
|
CR = Command Register [HEX]
|
|
FR = Features Register [HEX]
|
|
SC = Sector Count Register [HEX]
|
|
SN = Sector Number Register [HEX]
|
|
CL = Cylinder Low Register [HEX]
|
|
CH = Cylinder High Register [HEX]
|
|
DH = Device/Head Register [HEX]
|
|
DC = Device Command Register [HEX]
|
|
ER = Error register [HEX]
|
|
ST = Status register [HEX]
|
|
Powered_Up_Time is measured from power on, and printed as
|
|
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
|
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
|
|
|
Error 212 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 80 8f 49 b7 e1 00 00:23:25.810 READ VERIFY SECTOR(S)
|
|
40 00 90 7f 49 b7 e1 00 00:23:16.981 READ VERIFY SECTOR(S)
|
|
40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S)
|
|
40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S)
|
|
40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S)
|
|
|
|
Error 211 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 90 7f 49 b7 e1 00 00:23:16.981 READ VERIFY SECTOR(S)
|
|
40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S)
|
|
40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S)
|
|
40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S)
|
|
|
|
Error 210 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 a0 6f 49 b7 e1 00 00:23:08.152 READ VERIFY SECTOR(S)
|
|
40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S)
|
|
40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S)
|
|
40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S)
|
|
|
|
Error 209 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 b0 5f 49 b7 e1 00 00:22:59.352 READ VERIFY SECTOR(S)
|
|
40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S)
|
|
40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S)
|
|
40 00 10 ff 49 b7 e1 00 00:22:32.938 READ VERIFY SECTOR(S)
|
|
|
|
Error 208 occurred at disk power-on lifetime: 2914 hours (121 days + 10 hours)
|
|
When the command that caused the error occurred, the device was active or idle.
|
|
|
|
After command completion occurred, registers were:
|
|
ER ST SC SN CL CH DH
|
|
-- -- -- -- -- -- --
|
|
40 51 00 08 4a b7 e1 Error: UNC at LBA = 0x01b74a08 = 28789256
|
|
|
|
Commands leading to the command that caused the error were:
|
|
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
|
|
-- -- -- -- -- -- -- -- ---------------- --------------------
|
|
40 00 c0 4f 49 b7 e1 00 00:22:50.581 READ VERIFY SECTOR(S)
|
|
40 00 d0 3f 49 b7 e1 00 00:22:41.765 READ VERIFY SECTOR(S)
|
|
40 00 f0 1f 4a b7 e1 00 00:22:41.738 READ VERIFY SECTOR(S)
|
|
40 00 10 ff 49 b7 e1 00 00:22:32.938 READ VERIFY SECTOR(S)
|
|
40 00 30 df 49 b7 e1 00 00:22:24.109 READ VERIFY SECTOR(S)
|
|
|
|
SMART Extended Self-test Log (GP Log 0x07) not supported
|
|
|
|
SMART Self-test log structure revision number 1
|
|
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
|
Selective Self-tests/Logging not supported
|
|
|
|
SCT Commands not supported
|
|
|
|
Device Statistics (GP/SMART Log 0x04) not supported
|
|
|
|
Pending Defects log (GP Log 0x0c) not supported
|
|
|
|
SATA Phy Event Counters (GP Log 0x11) not supported
|
|
|